• The KIPS Transactions:PartA
• /
• v.15A no.3
• /
• pp.135-140
• /
• 2008

This paper describes a high-speed CMOS demultiplexer using redundant multi-valued logic (RMVL). The proposed circuit receives serial binary data and is converted to parallel redundant multi-valued data using RMVL. The converted data are reconverted to parallel binary data. By the redundant multi-valued data conversion, the RMVL makes it possible to achieve higher operating speeds than that of a conventional binary logic. The implemented demultiplexer consists of eight integrators. Each integrator is composed of an accumulator, a window comparator, a decoder and a D flip flop. The demultiplexer is designed with TSMC $0.18{\mu}m$ standard CMOS process. The validity and effectiveness are verified through the HSPICE simulation. The demultiplexer is achieved the maximum data rate of 20 Gb/s and the average power consumption of 95.85 mW.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.2
• /
• pp.121-126
• /
• 2007

This paper describes a 9.09 Gb/s CMOS demultiplexer using redundant multi-valued logic (RMVL). The proposed circuit receives serial binary data and is converted to parallel redundant multi-valued data using RMVL. The converted data are reconverted to parallel binary data. By the redundant multi-valued data conversion, the RMVL makes it possible to achieve higher operating speeds than that of a conventional binary logic. The implemented demultiplexer consists of eight integrators. Each integrator is composed of an accumulator, a window comparator, a decoder and a D flip flop. The demultiplexer is designed with Samsung $0.35{\mu}m$ standard CMOS process. The validity and effectiveness are verified through the post layout simulation. The demultiplexer is achieved the maximum data rate of 9.09 Gb/s and the average power consumption of 69.93 mW. This circuit is expected to operate at higher speed than 9.09 Gb/s in the deep-submicron process of the high operating frequency.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.1A
• /
• pp.47-53
• /
• 2003

This paper describes the design of a 155 Mb/s multiplexer-demultiplexer chip. This device for a 2.5 Gb/s SDH based transmission system is to interleave the parallel data of 51 Mb/s into 155 Mb/s serial data output, and is to deinterleave a serial input bit stream of 155 Mb/s into the parallel output of 51 Mb/s The input and output of the device are TTL compatible at the low-speed end, but 100K ECL compatible at the high-speed end The device has been fabricated with a 0.7${\mu}m$ BiCMOS gate array The fabricated chip shows the typical phase margin of 180 degrees and output data skew less than 470 ps at the high-speed end. And power dissipation is evaluated under 2.0W.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.4A
• /
• pp.566-572
• /
• 2000

In the receiver of optical communication systems, a demultiplexer converts to a single data stream with a highbit rate into several parallel data streams with a low bit rate. In this paper, we design a 1:4 demultiplexer using SiGe HBT with emitter size of 2x8um² The operation speed is 10Gbps, the rise and fall times of 20-80% are37ps and 36ps, respectively and the dissipation of power is 1.40W.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.5
• /
• pp.9-14
• /
• 2004

Lightwave communication system for Wavelength division multiplexing(WDM) consists of multiplexer, demultiplexer and optical Inter. But, the existing multiplexer, demultiplexer and optical filter is difficult to minimize system and reduce weight because they are not integrated device type. In this paper, thus, we propose the OADM baed on a Mach-Zehnder interferometer(MZI) with FBG(fiber Bragg Slating) in the interferometer Ems. The OADM using FBG. and MZI is able to minimize system and reduce weight. We analyze output characteristics of OADM and present the optimum design data through the computer simulation and experimentation. Also unposed OADM fits for DWDM(Dense WDM) system because of wide bandwidth by tuning narrow linewidth.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.699-702
• /
• 2005

This paper describes a high speed interface using redundant multi-valued logic for high speed communication ICs. This circuit is composed of encoding circuit and decoding circuit. Because of the multi-valued data conversion, this circuit makes it possible to achieve higher operating speeds than that of a conventional binary logic. Using this logic, a 1:4 DEMUX (demultiplexer) was designed using a 0.35um standard CMOS technology. Proposed circuit is achieved an operating speed of 4.5Gb/s with a supply voltage of 3.3V and with power consumption of 53mW.

• Journal of IKEEE
• /
• v.14 no.4
• /
• pp.283-290
• /
• 2010

This study is on the design of 10Gbps CMOS receiver circuits for fiber-optic communication. The receiver is made up of a photodiode, a transimpedance amplifier, a limiting amplifier, an equalizer, a clock and data recovery loop circuit, and a demultiplexer or demux with some auxiliary circuits including I/O circuits. Various wideband or high-speed circuit techniques are harnessed to realize a feasible, effective, and reliable receiver for a SONET fiber-optic standard, OC-192.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.1
• /
• pp.67-75
• /
• 1997

This paper presents a virtual-parallel multistage interconnection network (MIN) which provides multipath between processor and memory module. The proposed virtual-parallel MIN network which uses $m{\times}1$ mutiplexer at the input switching block, $1{\times}m$ demultiplexer at the output switching block and logN-1 switching stages has maximum $2{\times}m$ unique paths between processor and memory module. Because it has multi-redundance paths, a number of processors can connect a specific Also, this new virtual-parallel structured MIN network can reduce packet collision possibility at switching block and it has cost. It shown to improve a performance and to be a very simple structure in comparision with MBSF structured MIN.

• Journal of IKEEE
• /
• v.10 no.2 s.19
• /
• pp.128-133
• /
• 2006

This paper describes a high speed interface circuit using redundant multi-valued logic for high speed communication ICs. This circuit is composed of encoding circuit that serial binary data are received and converted into parallel redundant multi-valued data, and decoding circuit that converts redundant multi-valued data to parallel binary data. Because of the multi-valued data conversion, this circuit makes it possible to achieve higher operating speeds than that of a conventional binary logic. Using this logic, the proposed 1:4 DEMUX (demultiplexer, serial-parallel converter), was designed using a 0.35um standard CMOS technology. Proposed DEMUX is achieved an operating speed of 4.5Gb/s with a supply voltage of 3.3V and with power consumption of 53mW. The operating speed of this circuit is limited by the maximum frequency which the 0.35um process has. Therefore, this circuit is to achieve CMOS communication ICs with an operating speed greater than 10Gb/s in submicron process of high operating frequency.