• Proceedings of the Korean Society of Computer Information Conference
• /
• 2021.07a
• /
• pp.417-419
• /
• 2021

명의신탁이란 신탁자와 수탁자 간의 대내적 관계에서는 신탁자가 부동산소유권을 보유하고 신탁목적물이 부동산을 관리하고 수익 및 처분하면서 등기의 공부상 소유명의만을 수탁자로 하여 두는 제도로서 구법시대 부터 판례에 의하여 인정되어왔다. 부동산소유권과 그 밖의 물권을 실체적 권리관계에 부합하도록 실권리자 명의로 등기함으로써 부동산등기제도를 남용한 불법행위 등 반사회적 행위를 예방하고 부동산 거래의 안정화를 도모하여 국민경제의 건전한 성장에 기여함을 목적으로 1995년 제정된 부동산실명법에 의하여 원칙적으로 명의신탁이 금지될 뿐만 아니라 엄격하게 해석되어야 함에 불구하고 아직도 명의신탁은 척결되지 않고 있는 것이 사실이다. 특히 명의신탁에 있어서 부동산실명법에 의거 명의신탁약정이 무효가 된 경우에 명의신탁 대상의 부동산소유권이 누구에게 귀속되는가 등 여러 가지 문제점이 대두되고 있다. 따라서 명의신탁은 계약자유의 원칙이 지배하는 현시점에서 법률행위 논리가 반영되어야 할 것으로 본다.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2003.11a
• /
• pp.43-48
• /
• 2003

축구 전용 경기장에서 캐노피에 설치되는 등기구의 위치를 Pattern Search법을 이용하여 컴퓨터 시뮬레이션하였다. 조명 등기구 배치간격을 변화시키는 시뮬레이션을 통해 국·내외(FIFA, 유럽방송연맹, KS) 기준에 명시된 수평면 조도, 수직면 조도, 균제도, 눈부심 정도에 적합한 최적의 값을 찾았었다. 향후 국내 축구 전용 경기장 조명기구의 설계 및 시공, 유지관리 보수시 많은 참고가 되었으면 한다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.408-411
• /
• 2009

본 논문에서는 아이소-지오메트릭 해석 방법을 사용하여 응력 제한 조건이 있는 형상 최적설계 문제를 다룬다. 아이소-지오메트릭 해석 방법은 해석에 사용되는 기저 함수와 기하 모델을 구성하는 함수가 일치하여 기하학적으로 정확하기 때문에 설계민감도 해석 및 형상 최적설계에 있어서 강점이 있다. 많은 최적화 문제에서 최대 강성을 확보하는 방향으로 최적화가 진행되고 있는데 이때 응력 조건을 고려하지 않는 경우가 대부분이다. 응력 제한조건이 있는 구조물에서 아이소-지오메트릭 형상 최적설계를 적용시켜 봄으로써 그 효용성을 확인하였다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.557-560
• /
• 2009

본 연구에서는 건물의 규모, 용도 및 형식 등에 따라 다양하게 요구되는 성능에 대응할 수 있도록 하기 위한 성능설계에 대한 개념을 검증하고, 강구조 건축물의 특성을 고려한 성능레벨 및 성능한계에 대한 분류방법을 제안하였다. 또한 강구조 건축물의 경우 강도가 높고 경량인 특성에 의해 다른 구조형식에서는 크게 고려하지 않아도 되는 거주성능 및 진동특성을 제어하여 기능을 유지하기 위한 성능레벨을 설정하여 구조물이 항복하기 전의 성능레벨을 기능유지 및 무손상의 2단계로 제시하고, 이 때의 한계치를 기능한계 및 손상한계로 구분하였다. 강구조 건축물의 손상한계를 정의하기 위해 강구조 건축물의 설계 예를 이용하여 항복 층간변형각을 조사하였다. 그 결과 구조물의 손상발생을 억제할 수 있는 손상한계를 규정하기 위해 주로 사용하고 있는 층간변형각은 구조형식 및 설계방법에 따라 편차가 크게 나타나고 있으므로 손상한계치의 층간변형각을 임의로 설정하는 것은 매우 어려우며 향후 이에 대한 해석적, 실험적 검증이 필요할 것으로 판단되었다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.2
• /
• pp.127-134
• /
• 2009

T-splines are recently proposed geometric modeling tools. A T-spline surface is a NURBS surface with T-junctions and is defined by a control grid called T-mesh. Local refinement can be performed very easily for T-splines while it is limited for B-splines or NURBS. Using T-splines, patches with unmatched boundaries can be combined easily without special technique. In this study, the analysis methodology using T-splines is proposed. In this methodology, T-splines are used both for description of geometries and for approximation of solution spaces. Two-dimensional linear elastic and dynamic problems will be solved by employing the proposed T-spline finite element method, and the effectiveness of the current analysis methodology will be verified.

• Journal of computational fluids engineering
• /
• v.15 no.2
• /
• pp.35-40
• /
• 2010

In the present work, LES with new variational multiscale method is conducted on the fully developed channel flow with Reynolds number, 180 based on the friction velocity and the channel half width. Incompressible Navier-Stokes equations are integrated using finite element method with the basis function of NURBS. To solve space-time equations, Newton's method with two stage predictor multicorrector algorithm is employed. The code is parallelized using MPI. The computational domain is a rectangular box of size $2{\pi}{\times}2{\times}4/3{\pi}$ in the streamwise, wall normal and spanwise direction. Mean velocity profiles and velocity fluctuations are compared with the data of DNS. The results agree well with those of DNS and other traditional LES.

• Journal of computational fluids engineering
• /
• v.16 no.2
• /
• pp.49-55
• /
• 2011

Turbulent flows with wavy wall are simulated using Residual-based Variational Multiscale Method (RB-VMS) which is proposed by Bazilves et al(2007) as new Large Eddy Simulation methodology. Incompressible Navier-Stokes equations are integrated using Isogeometric analysis which adopt the basis function as NURBS. The Reynolds number is 6760 based on the bulk velocity and averaged channel height. And the amplitude (${\alpha}/{\lambda}$) of wavy wall is 0.05. The computational domain is $2{\lambda}{\times}1.05{\lambda}{\times}{\lambda}$ in the streamwise, wall normal and spanwise direction. Mean quantities and turbulent statistics near wavy wall are compared with DNS results of Cherukat et al.(1998). The predicted results show good agreement with reference data.

• 한국전산유체공학회:학술대회논문집
• /
• 2009.11a
• /
• pp.56-59
• /
• 2009

In the present work, LES with new variational multiscale method is conducted on the fully developed channel flow with Reynolds number is 180 based on the friction velocity and the channel half width. Incompressible Navier-Stokes equations are integrated using finite element method with the basis function of NURBS. To solve space-time equations, Newton's method with two stage predictor multicorretor algorithm is employed. The code is parallelized using MPI. The computational domain is a rectangular box of size $2{\pi}{\times}2{\times}4/3{\pi}$ in the streamwise, wall normal and spanwise direction. Mean velocity profiles and velocity fluctuations are compared with the data of DNS. The results agree well with those of DNS and other traditional LES.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2008.04a
• /
• pp.216-221
• /
• 2008

Shape design optimization for linear elasticity problem is performed using isogeometric analysis method. In many design optimization problems for real engineering models, initial raw data usually comes from CAD modeler. Then designer should convert this CAD data into finite element mesh data because conventional design optimization tools are generally based on finite element analysis. During this conversion there is some numerical error due to a geometry approximation, which causes accuracy problems in not only response analysis but also design sensitivity analysis. As a remedy of this phenomenon, the isogeometric analysis method is one of the promising approaches of shape design optimization. The main idea of isogeometric analysis is that the basis functions used in analysis is exactly same as ones which represent the geometry, and this geometrically exact model can be used shape sensitivity analysis and design optimization as well. In shape design sensitivity point of view, precise shape sensitivity is very essential for gradient-based optimization. In conventional finite element based optimization, higher order information such as normal vector and curvature term is inaccurate or even missing due to the use of linear interpolation functions. On the other hands, B-spline basis functions have sufficient continuity and their derivatives are smooth enough. Therefore normal vector and curvature terms can be exactly evaluated, which eventually yields precise optimal shapes. In this article, isogeometric analysis method is utilized for the shape design optimization. By virtue of B-spline basis function, an exact geometry can be handled without finite element meshes. Moreover, initial CAD data are used throughout the optimization process, including response analysis, shape sensitivity analysis, design parameterization and shape optimization, without subsequent communication with CAD description.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.1
• /
• pp.18-26
• /
• 2001

In this paper, the resonant characteristics and modes of the film bulk acoustic wave resonator (FBAR) used in 1~2 GHz frequency region are analyzed by it's input impedance which was calculated by three dimensional finite element method formulated as eigenvalue problem using electro-mechanical wave equation and boundary condition. It was extracted that the resonant and the spurious characteristics considering the effects of electrode area and shape variation and unsymmetry of upper and lower electrode. Those effects couldn't be analyzed by on dimensional analysis, e.g. Mason equivalent model. The simulation result was confirmed by comparing with the simulation data from Mason model analysis and the measured data of the ZnO FBAR fabricated using micro-machining technique. Also, through the simulation of the area variations of FBAR, it was obtained that the optimum ratio of length and thickness is 20:1 and the minimum ratio is 5:1 to operate thickness vibration mode.