• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.6A
• /
• pp.779-788
• /
• 2008

In this present study, the three dimensional shell elements analysis method for exact distortional behavior of multicell trapezoidal box girders subjected to an eccentric loading is proposed. In order to perform the independent distortional analysis using shell elements, it is necessary to calculate exact distortional forces. In this study, the force-decomposition equation for applied eccentric load acting on multicell trapezoidal box girder is derived and the equation based on static force equilibrium and superposition theory decompose the eccentric load to the loads cause flexture, torsion and distortion. So by using this force-decomposition equation and shell element analysis, each behavior can be easily analysis independently. This independent analysis method is very useful to physically understand each major behavior of multicell box girder, especially distortional phenomenon. Furthermore, it may be also very useful for designer to perform the independent distortional analysis for diaphragm design using simple 3D shell elements model without preliminary complex calculation for distortional constants.

• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.15-22
• /
• 2016

분자의 진동(특히, 뒤틀림 운동)은 분자의 반응성과 동역학적 특성을 결정하는 중요한 요인이다. 특히, 분자내 메틸기의 뒤틀림 운동은 매우 흔히 관찰되지만, 이 운동을 분광학 실험으로 관찰하고 이론적으로 설명하는 것은 여전히 어려운 과제이다. 여러 양자화학 소프트웨어가 상용화되어 있지만, 뒤틀림 운동과 같은 주기적인 퍼텐셜 에너지를 갖는 운동을 기술하기 위해서는 뒤틀림 운동을 위한 양자화학 솔버가 필요하다. 따라서, 우리는 EDISON의 양자화학 솔버(1차원 슈레딩거 방정식(LagChem), 작은 유기 분자의 분광스펙트럼 분석을 위한 양자 소프트웨어(SGU-QASSO))들을 이용하여 $2-C_3H_5Br$의 ZEKE/MATI (J.Chem.Phys.119,12351(2003),Zero kinetic energy/mass-analyzed threshold ionization)스펙트럼을 이해하고 해석해보았다. $2-C_3H_5Br$ 분자는 메틸기의 강한 뒤틀림 운동을 관찰 할 수 있는 비교적 간단한 분자이기 때문에 뒤틀림 운동 분석을 위한 실험대상으로 적절하다(J.Chem.Phys.119,12352(2003)). $2-C_3H_5Br$ 분자의ZEKE/MATI스펙트럼의 결과는 EDISON양자화학 솔버를 통해 성공적으로 재현되었다. 각 진동 전이의 진동수와 세기는 실험 결과와 일치했으며, 진동 상태에 따른 파동 함수도 구할수 있었다. 이를 바탕으로 thietane 분자와 같은 고리분자의 ring-puckering운동에 대해 이해하려 한다.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.04a
• /
• pp.231-234
• /
• 2003

폭과 길이에 비해 상대적으로 두께가 아주 얇은 판유리 생산에 있어서 여러 가지 형태 불안정성이 문제가 되는데, 본 논문에서는 이러한 형태 불안정성 중 완성된 판유리를 용도에 따라 절단했을 때 판 유리가 뒤틀리는 현상을 다루었다. 이러한 뒤틀림 현상을 해결하기 위한 노력의 일환으로 뒤틀림의 원인이 냉각 후 판유리에 남아있는 잔류 응력이라 생각하고, 판유리 제조 공정 중 여러 가지 온도 분포와 다양한 경계 조건을 사용했을 때 잔류응력 분포 변화를 해석하고 그에 따른 뒤틀림 거동을 해석하였다. (중략)

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.764-767
• /
• 2011

본 논문에서는 유한요소법을 이용하여 임의의 단면을 가지는 빔의 비틀림 문제를 해석 할 수 있는 방법론을 제시하였다. 빔 유한요소에서 연속적인 뒤틀림함수를 얻기 위해 각 절점에서 뒤틀림자유도를 정의한 후 빔의 길이 방향으로 보간하였다. 이러한 방법의 사용은 뒤틀림구속효과와 비선형문제에 쉽게 접근 할 수 있게 한다. 또한, 임의의 단면에 대한 뒤틀림함수는 각 단면에서 St.Venant 방정식을 유한요소법을 통해 수치적으로 계산된다. 단면에서 계산된 해는 3차원 일반 빔 요소의 변위장에 매핑된다. 위와 같은 절차를 통해 개발된 빔 유한요소를 사용하면 임의의 단면을 가진 빔 구조물을 자유/구속 뒤틀림조건에서 비틀림, 굽힘, 신축 변형이 복합적으로 고려하여 해석해 낼 수 있다. 이렇게 해석된 결과를 검증하기 위하여 사각단면과 L단면에서의 결과 값을 고찰하였다.

• Journal of Korean Society of Steel Construction
• /
• v.18 no.5
• /
• pp.515-524
• /
• 2006

Cross-sectional distortions take place when steel box girders a re subjected to torsional moment, as a consequence of which distortional warping stresses are necessarily developed. Additional normal stresses due to the distortion are should be included at the design stage. The relative magnitude with respect to the maximum bending stress are kept less than the specific values, i.e., at 5~10%, by properly spaced intermediate diaphragms that could prevent the distortional deformation of the box girder. However, current design equations for the stiffness of intermediate diaphragms were derived based on BEF. In this study, the area required by the intermediate diaphragm members are investigated through three-dimensional finite element analyses. The results of the analyses indicate that the current equations give to conservative values for the intermediate diaphragm of box girder bridges. Finally, an improved equation for the area of the intermediate diaphragm is derived from a regression analysis from the finite element analysis results.

• Journal of Wetlands Research
• /
• v.19 no.1
• /
• pp.63-68
• /
• 2017

Maintenance of sewer pipe process sewer pipe repairing process is necessary for deterioration of sewer pipe. In this research, analysis on performance (strength and twist strain) of eco-friendly and even expanded liner process using glass fiber and twist prevention band. As a results, tensile strength, bending strength and failure load is increased after the sewer pipe repairing process than advanced research results. And sewer pipe after the this process obtained advantage of prevention of twist strain and economic. After the this research, sewer pipe repairing process using glass fiber and twist prevention band could be suggest the eco-friendly and effective sewer pipe repairing process.

• Journal of Korean Society of Steel Construction
• /
• v.11 no.1 s.38
• /
• pp.13-22
• /
• 1999

The objective of this paper is to develop a program for distortional analysis of steel box girder bridges. This program is formulated by using MSDM(modified slope deflection method). Two examples are carried out to verify the validity of the developed technique and its computation procedures. The analyzed results are compared with the previously proposed methods, BEF(beam on elastic foundation) and EBEF(equivalent beam on elastic foundation). The BEF method is limited only to prismatic straight box girders. In the EBEF method, stiffness of the intermediate diaphragms is infinitely considered. On the other hand, stiffness of the intermediate diaphragms is idealized as spring contant in this study. And then, nonprismatic straight box girders can be analyzed using the same procedure. Therefore, the comparison shows that the MSDM algorithm proposed in this paper is more efficient and reliable. Also parametric studies are perfomed using the proposed algorithm.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.2
• /
• pp.249-259
• /
• 2011

In this study, the distortional behaviors of tub-section steel girders subjected to torsional loading were analyzed, and predictor equations were developed for estimating the member forces induced in the internal bracing system installed in the steel tub girders. Torsional loadings originated either by eccentric vertical loading or girder curvature were decomposed into the pure torsional force component that does not affect the distortional box deformation, and into the distortional force component that directly induces box distortion. The axial member forces induced in the internal cross frames were formulated as a function of the magnitude of torsional loading through the analytical investigation of the interactions between the distortional force component and internal cross frames. To verify the proposed equations, three-dimensional finite element analysis (3D FEA) was conducted for the straight simple-span girder and the three-span continuous girder samples. Very good agreement was found between the member forces from the FEA and the proposed equations.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2001.04b
• /
• pp.1029-1032
• /
• 2001

자기구성 특징지도(Self-Organizing feature Map : SOM) 및 $L^*$ 등의 자가 학습 신경망의 알고리즘들은 학습 결과 중에 바람직하지 못한 뒤틀림 현상(cross-over)을 생성하게 되므로 재학습으로 인한 전반적인 학습 시간의 지연을 초래한다. 이 논문에서는 비교적 학습 속도가 빠른 $L^*$의 점증적 학습 구조를 기본으로 하여 뒤틀림 현상 방지를 목적으로 초기 학습 단계에서 학습 가중치들의 노드들을 재조정하는 개선된 알고리즘을 제안한다. 이러한 알고리즘의 실험 결과는 모두 정상적인 학습 결과를 보이고 학습의 시행 착오적인 재실행이 없으므로 전반적인 학습 속도는 기존의 알고리즘보다 빠르게 됨을 보인다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.5
• /
• pp.577-585
• /
• 2023

Lateral torsional buckling causessafety accidentssuch as collapse accidents during erection. Therefore, anaccurate safety designshould be conducted. Lateral torsional buckling canbe prevented by reinforcing the end orreducing the unbraced length. The method ofreducing the unbraced length by installing a crossframe has high material and installation costs and low maintenance performance.In addition, structuralsafety may be deteriorated due to cracks. The end reinforcement method using Concrete Filled Half Pipe Stiffeneris a method ofreinforcing the end of a plate girder using a stiffenerin the form of a semi-circular column. This method increasesthewarping strength ofthe girder and increasesthe lateral torsional buckling strength.In thisstudy, the effect ofincreasing the warping strengthof plate girders with concrete filled half pipe stiffeners was confirmed. To verify the effect, the results ofthe designequationand the finite element analysis were compared and verified through a experiment. As a result, the plate girderwithCFHPS increased thewarping strengthand confirmed that the lateral torsional buckling strength was increased.