• Title/Summary/Keyword: 동적온도변화

Search Result 171, Processing Time 0.023 seconds

원자력용 316L 스테인레스 강의 고온기계적 성질에 미치는 질소의 영향

  • 김대환;류우석;남호윤;김영철;홍준화
    • Proceedings of the Korean Nuclear Society Conference
    • /
    • 1995.05a
    • /
    • pp.729-734
    • /
    • 1995
  • 원자력용 316L강에 질소를 첨가한 경우의 고온 인장성질을 조사하였다. 온도가 증가하면 인장강도는 감소하다가 온도범위가 30$0^{\circ}C$~50$0^{\circ}C$에서는 일정한 값을 나타낸 후 급격한 감소를 나타내었고 연신율은 감소하다가 40$0^{\circ}C$에서 최소값을 나타낸 후 다시 증가하는 경향을 나타내었다. 질소를 첨가하면 인장강도증가와 함께 연신율도 증가하였다. 동적변형시효 온도구간에서 변형속도변화에 따른 인장강도 및 연신율의 변화는 매우 작다. 동적변형시효를 위한 활성화에너지를 구해본 결과 동적변형시효를 일으키는 원소는 Cr이다. 질소를 첨가하면 동적변형시효가 발생되는 온도가 고온 쪽으로 이동되었는데 이것은 질소가 Cr과의 상호작용에 의해 Cr의 확산속도를 낮추기 때문이다. 가공경화지수는 동적변형시효와 회복의 영향으로 40$0^{\circ}C$에서 최대값을 나타내었으며 이 온도는 연신율이 최소값을 나타내는 온도와 인장강도가 일정하게되는 온도와 일치하므로 강도강화기구는 동적변형시효로 판명되었다.

  • PDF

Analysis of the Frequency for Cable of Cable-Stayed Bridges to Temperature Variation (온도변화에 따른 사장교 케이블 고유진동수 분석)

  • Lee, Hyun-Chol;Kim, Jin-Soo;Park, Kyoung-Ho;Lee, Jong-Jae
    • Journal of the Korea institute for structural maintenance and inspection
    • /
    • v.25 no.2
    • /
    • pp.23-34
    • /
    • 2021
  • Cable was targeted for cable, which is a main material of cable-stayed bridges that have high frequency of use at home and abroad and many future construction plans. First of all, experiments were conducted on temperature loads that were permanently used due to changes in temperature of cables and changes in air temperature, taking into account changes in normal fat. The dynamic characteristics of cables were compared and analyzed by applying various systems to change dynamic characteristics by applying temperature change of cables. Comparing and analyzing the dynamic characteristics of cables, the acceleration, frequency and tension of cables due to temperature rise tended to decrease, the degree of influence of displacement of cables was analyzed, and the results of the mode characteristics of cables were analyzed. In particular, the correlation of cable acceleration, natural frequency, and tension due to changes in cable temperature showed that the cable tension is highly sensitive to acceleration and natural frequency.

Dynamic Response of Jointed Concrete Pavement in Test Road Due to Temperature Gradient (온도구배에 의한 시험도로 줄눈콘크리트 포장의 동적응답)

  • Yoo Tae-Seok;Jeong Jin-Hoon;Han Seung-Hwan;Sim Jong-Sung
    • International Journal of Highway Engineering
    • /
    • v.8 no.1 s.27
    • /
    • pp.25-32
    • /
    • 2006
  • Behavior of concrete pavement due to temperature gradient was investigated for 48 hours at test road using Falling Weight Deflectometer. The deflections at slab center changed similarly to those of ambient temperature and temperature gradients in the slab. And rapid variations in the deflections were observed between 8 to 12 in the morning. However, dynamic modulus of subgrade reaction and joint deflections showed reverse trends to the ambient temperature and temperature gradients. The dynamic modulus of subgrade reaction was significantly affected by temperature gradient when its value got higher. Backcalculated elastic moduli were obtained using AREA method and Method of Equivalent Thickness. The trends of the backcalculated elastic modulus were similar to those of dynamic modulus of subgrade reaction. Measured load transfer efficiencies showed maximum peak in the morning due to dowel locking. However, additional effort is necessary to verify the result.

  • PDF

Optimization of Dynamic Terms in Core Overtemperature Delta-T Trip Function (노심 과온도 Delta-T 보호식의 동적보정함수 최적화)

  • Park, Jin-Ho;Yoon, Han-Young;Kim, Hee-Cheol;Lee, Chong-Chul
    • Nuclear Engineering and Technology
    • /
    • v.24 no.3
    • /
    • pp.236-242
    • /
    • 1992
  • The characteristics of dynamic terms in the core overtemperature Delta-T trip function are investigated for various time constants and the effects on the trip setpoint are studied for the uncontrolled RCCA bank withdrawal at power event by using the NLOOP and the PUMA code. Based on this study, a procedure determining the optimal dynamic term is suggested and accordingly the optimum time constants are determined for the KORI 3&4 transition core. It reveals that the vessel average temperature-lead-lag term is the most sensitive in DNB trip setpoint and the optimized time constants are 21 seconds for lead and 4 seconds for lag.

  • PDF

Autonomic Responses caused by Dynamic Visual Stimulation and rough Roads (동적 시각자극과 도로 굴곡 변화에 따른 자율신경계 반응)

  • 정순철;민병찬;김상균;민병운;오지영;김유나;김철중
    • Science of Emotion and Sensibility
    • /
    • v.2 no.2
    • /
    • pp.75-82
    • /
    • 1999
  • 지금까지 인간 감성의 측정은 대부분 제한된 실험실에서 실시되었다. 보다 자연스러운 동적인 환경에서 인간의 감성을 자율신경계의 반응을 통해 추출하고자 본 연구를 수행하였다. 쾌 또는 불쾌한 도로의 시각 환경이 긍정 및 부정 시각으로 제시되었고, 아스팔트, 시멘트, 비포장 도로 등의 도로 굴곡 변화가 또 다른 쾌/불쾌 관련 감성 자극으로 제시되었다. 건강한 5명의 피험자는 실험을 위해 차량 내부에서 도로의 시각 환경을 관찰하게 하였고, 세 가지 굴곡이 다른 도로를 주행하면서 굴곡 변화에 따른 감성을 느끼게 하였다. 심박 변화율, 피부 저항, 피부온도 등의 생리 신호를 측정하였고 주관적 평가와 비교 분석하였다. 피험자가 긍정 시각 장면에 비해 부정 시각 장면을 보았을 때 또한 도로 굴곡의 변화가 클수록 평균 R-R 간격과 피부온도의 감소율은 컸고 피부 전도도는 증가하였다. 본 연구로부터 동적 환경에서 긍정 감성 자극에 비해 부정 감성 자극이 주어 졌을 때 교감 신경계의 활성화가 보다 증가함을 관찰할 수 있었다.

  • PDF

Analysis on the Thermal Efficiency of Branch Prediction Techniques in 3D Multicore Processors (3차원 구조 멀티코어 프로세서의 분기 예측 기법에 관한 온도 효율성 분석)

  • Ahn, Jin-Woo;Choi, Hong-Jun;Kim, Jong-Myon;Kim, Cheol-Hong
    • The KIPS Transactions:PartA
    • /
    • v.19A no.2
    • /
    • pp.77-84
    • /
    • 2012
  • Speculative execution for improving instruction-level parallelism is widely used in high-performance processors. In the speculative execution technique, the most important factor is the accuracy of branch predictor. Unfortunately, complex branch predictors for improving the accuracy can cause serious thermal problems in 3D multicore processors. Thermal problems have negative impact on the processor performance. This paper analyzes two methods to solve the thermal problems in the branch predictor of 3D multi-core processors. First method is dynamic thermal management which turns off the execution of the branch predictor when the temperature of the branch predictor exceeds the threshold. Second method is thermal-aware branch predictor placement policy by considering each layer's temperature in 3D multi-core processors. According to our evaluation, the branch predictor placement policy shows that average temperature is $87.69^{\circ}C$, and average maximum temperature gradient is $11.17^{\circ}C$. And, dynamic thermal management shows that average temperature is $89.64^{\circ}C$ and average maximum temperature gradient is $17.62^{\circ}C$. Proposed branch predictor placement policy has superior thermal efficiency than the dynamic thermal management. In the perspective of performance, the proposed branch predictor placement policy degrades the performance by 3.61%, while the dynamic thermal management degrades the performance by 27.66%.

Parameter Analysis of Platinum Silicide Rectifier Junctions acceding to measurement Temperature Variations (측정 온도 변화에 따른 백금실리사이드 정류성 접합의 파라미터 분석)

  • 장창덕;이용재
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 1998.05a
    • /
    • pp.405-408
    • /
    • 1998
  • In this paper, We analyzed the current-voltage characteristics with n-type silicon substrates concentration and temperature variations (Room temperature, 5$0^{\circ}C$, 75$^{\circ}C$) in platinum silicide and silicon junction. Measurement electrical parameters are forward turn-on voltage, reverse breakdown voltage, barrier height, saturation current, ideality factor, dynamic resistance acceding to junction concentration of substrates and temperature variations. As a result, the forward turn-on voltage, reverse breakdown voltage, barrier height and dynamic resistance were decreased but saturation current and ideality factor were increased by substrates concentration variations. Reverse breakdown voltage and dynamic resistance were increased by temperature variations.

  • PDF

질소첨가 316L 스테인레스 강에서 고온 저주기피로시 발생하는 경화거동

  • 김대환;류우석;김영철;홍준화;최시경
    • Proceedings of the Korean Nuclear Society Conference
    • /
    • 1996.11b
    • /
    • pp.463-468
    • /
    • 1996
  • 질소의 함량을 0.04%~0.15% 까지 변화시킨 316L 스테인레스 강으로 공기 중에서 저주기 피로시험을 수행하였다. 전체변형범위 1%, 변형속도 2$\times$$10^3$/sec, 삼각파로 상온 ~$600^{\circ}C$ 온도범위에서 시험을 수행하였다. 상온에서는 사이클이 진행됨에 따라서 연화가 계속해서 발생하지만 온도가 증가하면 초기에 경화가 발생한다. 피로시험 초기에 경화되는 정도와 saturation 응력은 온도가 증가하면 증가한다. 이러한 경화현상은 동적변형시효에 의해서 발생되는 것으로 판명되었다. 질소를 첨가하면 강도는 증가하지만 경화는 감소되었다. 질소에 의한 경화의 감소는 질소가 동적변형시효를 억제하기 때문이다.

  • PDF

원자로 정지 관련 동적보상기의 응답시간 평가

  • 주운표;황희수;우숭웅;김건중
    • Proceedings of the Korean Nuclear Society Conference
    • /
    • 1996.05a
    • /
    • pp.309-314
    • /
    • 1996
  • 가압 경수로형 원전 안전정지/ 안전 주입 변수와 관련된 계기는 관련 기술 기준에 따라 정기 보수시 교정이 이루어지면, 정지 신호를 모의 주입하여 물리량 검출기로 부터 원자로 정지집계 권선의 풀림시간까지의 총 응답 시간이 사고해석시 가정된 계통의 응답 지연시간이내에 들어 있는 지를 확인한다. 이 정지 신호에 응답하는 동적 보상기의 특성과 관련하여 설계과정에서 삽입된 근사화 오차에 대한 정략적인 평가가 이미 알려진 바 있고, 시간 응답 측정시 삽입되는 지연 요소로 인한 오차도 이에 포함시켜 분석한 바 있어 실제 교정시 정밀도 향상을 위하여 활용하고 있다. 이 논문을 통하여 원자로 정지계통의 응답시간 측정시 노 냉각수 평균 온도 변화율 동적 보상 미분-지연 카드에 모의입력으로 스텝신호를 주입할 경우, 이를 과도하게 큰 신호로 인식하여 매우 짧은 시간(1초 이내)에 응답되고, 스텝신호대신 1%P.U./초로 평균온도 변화율만을 주입할 경우, 보다 늦게 응답됨을 밝혔다. 따라서 모의 시험 방범에 있어서 입력 선택을 적합하게 하여야만 계통의 건전성을 응답시간으로 확인한 수 있는 데, 이에 적합한 모의 입력 방법을 제안하였다.

  • PDF

원자로 냉각재 배관용 SA516-Gr.70 강의 파괴저항성에 미치는 온도 및 하중속도의 영향

  • 윤지현;이봉상;오용준;김진원;홍준화
    • Proceedings of the Korean Nuclear Society Conference
    • /
    • 1998.05b
    • /
    • pp.48-53
    • /
    • 1998
  • 원자력 발전소 배관계통에 파단전 누설 (LBB) 설계개념의 적용을 위해서는 원자로 가동온도에서의 재료의 파괴저항성 평가가 필수적이다. 본 연구에서는 국내 원자로의 1차 냉각계통배관의 엘보우 소재로 사용되는 SA516-Gr.70 강의 파괴저항성에 미치는 DSA (Dynamic Strain Aging, 동적변형시효) 영향을 고찰하였다. 파괴저항성 평가를 위해 원자로 가동온도를 포함한 상온~50$0^{\circ}C$ 온도영역에서 준정적 하중에서부터 지진 하중 정도의 동적 하중까지 하중속도를 달리하여 직류전위차법 (DCPD) 이용하여 J-R 시험을 행하였다. J-R 시험결과, SA516-Gr.70 강은 특정한 온도와 하중속도의 조합에서 파괴저항성이 크게 떨어지는 양상을 보였으며, 낮은 파괴저항성을 나타내는 온도는 하중속도가 증가함에 따라 높은 온도쪽으로 이동하는 전형적인 DSA 감수성을 보였다. 인장시험을 통해서도 큰 폭의 serration 이 관찰되었으며 SA516-Gr.70 강에서 파괴저항성의 변화와 DSA 현상과의 연관성을 고찰하였다.

  • PDF