• Journal of Advanced Marine Engineering and Technology
• /
• 제17권3호
• /
• pp.33-41
• /
• 1993

양벽면 모두 사각돌출형조도요소가 설치된 동심 이중관내에서 생기는 비대칭 난류유동과 열전달 특성을, 열전달과 마찰계수에 미치는 조도의 합성효과를 조사하기 위해, 연구하였다. 이론해석에서는 한쪽면에 거칠기가 있는 평행평판의 유동에 대한 수정 플란틀 혼합길이(mixing length)이론의 난류 모델을 속도분포와 마찰계수를 구하는데 사용하였다. 최대속도지점에서 안쪽과 바깥쪽의 두 속도형상들은 힘의 평형에 의해 일치시켰다. 그리고 나서, 온도 분포와 열전달 계수를 계산하였다. 속도형성과 마찰계수들의 해석결과는 실험과 매우 잘 일치하였다. 마찰계수와 Nusselt number에 미치는 조도비, 조도에 대한 피치비, 그리고 반경비등과 같은 여러 변수들의 효과들을 조사하였다. 본 연구는 일정의 조도 요소들이 전체적 효율 측면에서 볼때 유리하게 열전달을 향상시킨다는 것을 증명하였다.

• Geotechnical Engineering
• /
• 제14권3호
• /
• pp.109-122
• /
• 1998

In the design and construction of Keystone block reinforced wall with geogrid, previous on the behaviour of wall in curved area is required. This study is to investigate the structural stability of wall and problems during construction in curved area. Previous analyzing methods, usually used for straight area of wall, have been reviewed to find any problems in applying to stability analysis of curved area. Thus, the purpose of this study is to show how to analyse the straight area of Keystone block wall first, and then turn this to use for analyzing various significance, concerning the design or construction of curved high keystone block wall. and the stress behavior on retaining wall between straight and curved conditions by F.E.M, using the shell analysis theory.

• Journal of the Korean Society of Clothing and Textiles
• /
• 제25권9호
• /
• pp.1633-1644
• /
• 2001

이 연구의 목적은 중년여성들의 체형을 분류하고 이들 체형을 분류하는 판별기준을 세우고자 하는 것이다. 이 연구에서 개발한 판별방법은 중년여성들의 체형을 간편하게 판별할 수 있도록 해주므로 이 방법을 활용하여 중년여성복을 제작할 경우, 소비자들은 인체적합도가 높은 의복을 구입 할 수 있고 의류업 체들은 이에 따른 매출증대를 가져올 수 있다. 연구의 진행절차와 이에 따른 결과는 다음과 같다. 1. 만 40세~59세 중년여성 279명에 대 한 인체 계측을 하였다. 인체 계측항목은 34개의 직접 계측항목과 측면사진 촬영을 통한 3개의 간접계측항목,11개의 지수치, 5개의 계산치 등의 총 53개 항목이다. 인체 계측치에 대한 통계분석 방법으로는 분산분석과 SNK검정, 판별분석 방법을 사용하였다. 2. 피험자는 몇 가지 체형으로 분류되었다. 상반신 체형분류는 인체측면 자세와 유방크기를 분류기준으로 하여 바른-유방중소 체형, 바른-유방대 체형, 젖힌-유방중소 체형 , 숙인/휜-유방중소 체형, 숙인/휜-유방대 체형의 5가지로 분류하였다. 하반신 체형분류는 배와 엉덩이의 돌출정도에 따라 분류하여 배정상-엉덩이정상 체형, 배 정상-엉덩이돌출 체형, 배돌출-엉덩이정상 체형 , 배돌출-엉덩이돌출 체형의 4가지로 분류하였다. 3. 분류된 체형은 다음의 판별변수에 따라 체형이 판별되었다. 상반신 체 형 의 판별변수는 앞품/뒤품, 가슴둘레/밑가슴둘레 , 앞길이/뒤 길이, 앞허리선$\longrightarrow$어깨선 길이/어깨선$\longrightarrow$뒤허 리선 길이의 4가지 항목이고, 하반신 판별변수는 엉덩이상부각도, 배 하부각도, 배상부 각도, 엉덩이둘레/엉덩이 최대둘레, 뒤엉덩이둘레의 5가지 항목이다. 상반신 체 형과 하반신 체형 판별함수 모두 70% 이상의 높은 적중률을 나타내었다.

• Journal of the Korean Institute of Landscape Architecture
• /
• 제40권6호
• /
• pp.161-172
• /
• 2012

The purpose of this study is to classify, evaluate and grade the existing highway tunnels to increase landscape and natural statistics keeping the structural safety about tunnel gates area and induce the ones that will be constructed in the future by drawing the improvements and restoring the techniques as an environment-friendly. To examine the types of tunnel gate area, total 54 tunnels were investigated by selecting Gyeongbu Expressway, Yeongdong Expressway, and Jungang Expressway. Tunnel entrances and exit ports were classified as a Wall-closed type and Protruding type, which is based on tunnel gate type. Vegetation Landscape types were classified as Multilayer-Same as the surrounding landscape_(MS), Multilayer-Difference of surrounding landscape_(MD), Single layer-Same as the surrounding landscape_(SS), Single layer-Difference of surrounding landscape_(SD), and a Desolate type which based on vegetation layers and environment-friendly. Potential vegetation recovery was identified based on the structural stability and revegetation potential of the tunnel. The factors include the structural stability of the slope height and slope gradient were selected. Revegetation potential was identified as a growth potential. This factor was used in the step to classify vegetation recovery potential of a tunnel. The result, which investigated the types of tunnel entrances and exit parts has found that the most typical in 33 places was a Wall closed type with 61.1% of the total ones. The case of vegetation landscape types was created but different from the ones surrounding it with 85.2% of the total ones. It is judged that the currently constructed vegetation of tunnel entrance and exit parts had put convenience on the safety and management before landscape consideration. In addition, tunnel entrance and exit parts with excellent potential for vegetation recovery were all Protruding type. In addition, it is judged that slope stability can easily obtain growth. Therefore, entrance and exist of the highway tunnels, which will be constructed in the future, should reflect location and the result of the natural and ecological survey in design by performing it in advance and their types, which minimize the damage area range, should be applied to the local characteristics suitably. In addition, the ecologically healthy tunnel construction should be done by introducing active vegetation recovery techniques based on its safety.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 한국감성과학회 2003년도 추계학술대회 논문집
• /
• pp.1151-1154
• /
• 2003

본 연구에서는 표면 돌출형태가 상이한 작업장 피로예방용 매트를 이용하여 선자세로 작업 시, 작업자의 생리적 반응을 통하여 매트사용에 따른 그들의 피로감의 변화를 알아보았다. 실험은 건강한 성인 남자 9명을 대상으로 EEG(Fp1, Fp2), ECG, EMG, SKT, 혈류량, 주관적 평가에 대하여 2종(WSM-PA3, WSM-PB3)의 표면 돌출형태가 상이한 피로예방용 매트에서 작업 전후 10분간과 작업 중 120분간 측정하였다. 작업은 단순반복의 수작업으로 실시하였다. 그 결과, WSM-PB3에 비하여 WSM-PA3 사용 시, $\alpha$파의 좌뇌 변동리듬 경사도와 쾌적도는 유의하게 증가(p＜0.05), RRI는 유의하게 감소(p＜0.05), 척추세움근의 주파수는 소폭으로 감소, 발등부의 피부온도는 유의하게 소폭으로 증가(P＜0.05), 하퇴 후면의 혈류량은 유의하게 증가(p＜0.05)하였다. 반면, 주관적 피로감 평가에서는 조건간 유의차가 나타나지 않았다. 이상의 결과에서 WSM-PB3에 비하여 WSM-PA3 사용이 선 자세로 반복작업하는 작업자의 피로예방에 긍정적 역할을 담당하는 것으로 나타났다.

• Journal of the Korean Solar Energy Society
• /
• 제36권2호
• /
• pp.41-51
• /
• 2016

A solar air heater was designed for supplementary domestic heating. The absorber plate had a series of protruding notches which had triangular openings on the front surface of the absorber plate to direct partial air flow to the rear surface and to enhance the convective heat transfer to the flowing air. The height of the opening as well as the opening configuration was determined by preceding numerical simulations. The experimental model had an absorber plate of 0.78-m width and 1.0-m length which was coated with black paint. The air temperature increased as much as $18^{\circ}C$ for $90-m^3/h$ flow rate when the absorber plate was inclined by $45^{\circ}$ for a clear-day solar irradiation of about $906W/m^2$. The collector efficiency ranged from 69 to 74%. Considering the simplicity of the structure and low manufacturing cost, the solar air heater might have competence as an auxiliary heating device for domestic use. On-site experimental results are presented with discussion for various solar irradiations and air flow conditions.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제19권12호
• /
• pp.903-909
• /
• 2018

In this paper, performance analysis of machine vision techniques is presented to improve the convenience and speed of automatic inspection in the industrial field when machine vision is applied to the image not taken in the stationary state, but in the moving state on a conveyer. When the length of cylindrical rods used for automobiles was measured using the edge detection method, the conveying speed increased, and the uncertainty of the boundary between the background and the part image increased, which resulted in a shorter image of the object taken. This paper proposes a linear compensation method to predict the biased errors of the length measurements after examining the pattern of biased and random errors, respectively, with 6 different types of specimens and 7 velocity stages. The length measurement corrected by the linear compensation method had the same accuracy as the stationary state within the speed range of 30 cm/s and could enhance the application capability in automatic inspections.

• Journal of Advanced Marine Engineering and Technology
• /
• 제20권1호
• /
• pp.1-12
• /
• 1996

The fully developed tubulent momentum and heat transfer induced by the square- ribbed roughness elements on both the inner and outer wall surfaces in the concentric annuli are studied analytically based on a modified turbulence model. Heat transfer coefficients for two conditions, i.e, a) inner wall heated as constant heat flux and outer wall insulated b) inner wall insulated and outer wall heated as constant heat flux, are investigated. The analytical results of the fluid flow are verified by experiment. The experiment is done with a pitot tube and a X-type hot wire anemometer to measure the time mean velocity profiles, zero shear stress positions, maximum velocity profiles and friction factors, and etc. The resulting momentum and heat transfer are discussed in terms of various parameters, such as the radius ratio, the relative roughness, the roughness density, Nusselt number and Prandtl number.

• Transactions of the Korean Society of Automotive Engineers
• /
• 제4권5호
• /
• pp.26-36
• /
• 1996

The fully developed turbulent momentum and heat transfer induced by the square-ribbed roughness elements on both the inner and outer wall surfaces in concentric annuli are studied analytically based on a modified turbulence model. The analytical results of the fuid flow are verified by experiment. The experiment is done with a pitot tube and a X-type hot wire anemometer to measure the time mean velocity profiles, zero shear stress positions, maximum velocity positions and friction factors, and etc. shown in Fig.1. The resulting momentum and heat transfer are discussed in terms of various parameters, such as the radius ratio, the relative roughness, the roughness density, Reynolds number, Nusselt bumber and Prand시 number. The study demonstrates that certain artificial roughness elements may be used to enhance heat transfer rates with advantage from the overall efficiency point of view by investigating turbulent flows and heat transfer in Fig.1.

• Transactions of the Korean Society of Mechanical Engineers
• /
• 제14권1호
• /
• pp.1-12
• /
• 1990

The study is concerned with the analysis of combined forging of non-axisymmetric shapes with inclined protrusions by UBET technique. Work hardening is considered for the given range of strain rate during the forging process. A complex shape with inclined cavities is analyzed by subdividing the workpiece into finite UBET elements for which simple velocity fields are applicable. An experimental set-up was designed and manufactured for the experiment, and experiments are carried out with lead billets. The devised set-up can be used for closed-die forging of complex shapes with protrusions in which the dies can be separated automatically for easy removal of the forged products. Based on the derived kinematically admissible velocity fields for corresponding UBET elements, general computer programs have been developed. Since the energy dissipation rate for each elemental region is provided by subprograms (Subroutine or Function), the developed program can be applied to the forging problems of various shapes. The present study has shown that the method developed can be effectively applied to forging of non-axisymmetric shapes with complicated protrusions.