• Journal of the Korean Society of Hazard Mitigation
• /
• v.3 no.3 s.10
• /
• pp.143-150
• /
• 2003

Recently, The corrosions of reinforced concrete structures are severe problems of economical social effects. PE-coated bars protecting from corrosion and enhancing durability of reinforced concrete structures are testified to evaluate structural properties. Tests are verified by comparative bending tests of the three type materials of epoxy coating, without coating and pe-coating. Load-deflection relations ate superior in pe-coated bar than any other materials(bare bar and epoxy bar). These are proved bonding properties enhancement by using cement powder.

• Journal of the Korean Electrochemical Society
• /
• v.1 no.1
• /
• pp.55-59
• /
• 1998

The water absorption in protective coatings, which may greatly influence the durability of these coatings, was studied using quartz crystal microbalance and electrochemical impedance technique. The water absorption in protective coatings and the change of coating capacitance with concentration of electrolyte were measured. The water absorption in coatings seems to be driven by osmotic pressure, and larger amount of water was absorbed in thinner coatings at initial stage of absorption. The amount of water absorbed in coatings changed with the type and crosslinking density of resin used in coating formulation. When water absorption and desorption of coating occured by exposing the coatings to electrolyte solutions of different concentration, increase in impedance caused by desorption of water was found to be higher in the case of thinner film.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1993.10a
• /
• pp.79-84
• /
• 1993

철근의 부식은 철근 콘크리트 구조물에 있어서 심각한 열화현상을 유발할 수 있으며 최근 들어 이로 인한 피해가 많이 보고되고 있다. 이와 같은 부식의 억제방안 중 철근에 직접 에폭시를 도막하는 것이 가장 효과적인 것으로 알려져 있다. 그러나 이 경우 에폭시 도막에 따른 부착성능의 저하가 우려되는 바 본 연구는 철근부식방지를 위해 에폭시를 도막한 철근의 부착특성을 고찰하기 위해 수행되었다. 주된 변수는 콘크리트 압축강도, 부착길이, 에폭시 도막두께이며 각 변수별로 부착특성의 변화를 관찰하였고 이를 통해 에폭시도막 철근의 사용성을 검토하였다. 본 실험결과에 기초하여 부착강도 예측식을 제안하였고 실험결과와 예측치를 비교하였다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.12 no.1 s.24
• /
• pp.9-14
• /
• 2006

Analysis has been made of the anti-corrosive property of organic coating under the shear stress of the flow by means of AC impedance method. Marine anti-corrosive painted panels were placed in the water channel with varying flow rate, thereby experiencing varying flow shear stress on the surfaces. The velocities of the salt water were ranged from 1.48 to 5.2 m/s and the coating thickness of from $70{\mu}m\;to\;140{\mu}m$. For all coating thicknesses investigated, the poorer anti-corrosive property and the lower adhesion strength have been found for the higher shear stress. It has been found that the shear stress accelerates the aging of organic marine coatings.

• Magazine of the Korea Concrete Institute
• /
• v.6 no.6
• /
• pp.173-179
• /
• 1994

Epoxy coated bars protecting reinforcing bars from corrosion and enhancing durability of reinforced concrete structures are tested to evaluate corrosion protection properties. Tests are performed based on the relevant sta.ndards of KS and ASTM, such as chenical resistance, salt water spray, salt crock test and chloride ermeability test. with the main varlable of the coating thlckness. Test results show good chemical protection property and chloride permeability. The results of the salt water spray and the salt crock test show that epoxy coating well protects the reinforcing bars from corrosion, cornparing to the biack bars without epoxy coatmg. However, several spots on the coated bars are rusted at the pinholes or un the bars with coating thickness less thar $200{\mu}M$. Special cautions are required i n the process of blast cleanmg when applying the usion-bonded epoxy coating.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2008.04a
• /
• pp.124-127
• /
• 2008

현장방염처리 물품의 방염성능평가시 실내 인테리어 공사가 끝난 후 시험 시료를 채취하여 연소시험을 실시하게 되어있다. 그러나 이러한 절차로 인해 검사 소요시간이 길어지고 여러 민원이 발생하여 이를 대처할 시험 방법이 필요하다. 따라서 연소시험 대신 도막두께 측정 시험 방법을 도입하여 방염성능평가에 따른 문제점들을 해결하고자 한다. 도막두께 측정 시험의 경우 도막두께 측정용 라벨을 방염도료를 칠해야 하는 합판이나 목재 위에 붙이고 도료 작업이 끝나고 나면 관할 소방서에 이 라벨을 떼어서 제출하여 기준 도막 두께와 비교 측정하였을 때 기준 도막두께보다 두꺼우면 방염성능을 인정해주고 만약 기준 도막두께보다 얇게 칠해지면 현장 검사 또는 시료 채취 후 연소시험을 병행하여 검사함으로서 안전하고, 책임 있는 방염성능 시공을 할 수 있도록 관리 감독할 수 있을 것이다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.100.2-100.2
• /
• 2010

Superstrate형 실리콘 박막 태양전지에서 전면전극으로 사용되는 투명전도막의 표면형상은 태양전지내로 입사하는 태양광의 표면산란에 영향을 미치며 표면산란 증가를 통한 광 포획 및 단락전류밀도 향상을 통하여 태양전지 효율을 증대시키는 중요한 역할을 한다. 기존에 실리콘박막 태양전지용으로 많이 사용되는 상용 Asahi-U형 투명전도막은 수소 플라즈마에 대한 안정성이 낮고 입사광의 장파장 대역에서의 산란특성이 낮아 실리콘 박막 태양전지의 고효율화에 한계점이 있었다. 최근에 Asahi-U형 투명전도막을 대신하여 ZnO계 투명전도막을 전면전극으로 사용하려는 연구가 활발히 진행되고 있으며 Al을 토핑원소로 사용하는 ZnO:Al 투명전도막은 우수한 전기적, 광학적 특성과 수소플라즈마 안정성 및 저 비용 등의 우수한 장점을 갖고 있다. 스퍼터링 방식으로 제조된 ZnO:Al 투명전도막의 표면형상은 일반적으로 증착 후 습식식각을 통하여 조절되며 식각 전 박막의 미세구조에 영향을 받는 것으로 알려져 있다. 또한 습식 식각 이후의 표면거칠기에 따라 다양한 광학적, 전기적 특성을 나타낸다. 본 연구에서는 in-line RF-magnetron sputter 장비를 이용하여 다양한 공정조건하에서 ZnO:Al 투명전도막을 제조하고 증착된 박막의 미세구조 특성에 따른 습식식각 이후의 표면형상 변화 및 전기적 광학적 특성 변화를 조사하였다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.6
• /
• pp.138-144
• /
• 2013

This study is for quality standard establishment of urethane waterproofing membrane method which is mostly applied to waterproofing method for underground parking lot and rooftop. The experiments were carried out on color differences, membrane thickness, tensile property by curing period of liquid urethane before placing protective concrete, and resistance of crack movement according to different substrate surface and reinforcement of non-woven fabric. As a result of experiments, it was found that color differences is increase, membrane thickness is thick, tensile property is low as concrete placing period is shorter. In the fatigue property, membrane thickness of 3 mm was not broken, but 1~2 mm was broken and in the case of the membrane reinforced with non-woven fabric was more stable comparatively non-reinforcement one.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.3
• /
• pp.298-304
• /
• 2017

The corrosion of reinforcements embedded in concrete causes some durability problems in reinforced and prestressed concrete structures. The epoxy coated reinforcements are one of the effective and reliable methods to prevent corrosion of reinforcements. However, it has been known that the epoxy coating reduces the bond capacity of reinforcement to concrete. This paper investigates the bond behaviors of epoxy coated reinforcements experimentally using direct pull-out test. Bond behaviors of epoxy coated bars for various reinforcement diameters of 10, 19 and 29mm and thicknesses of cover concrete of 1, 2, 3, and $4.5c/d_b$ (ratio of cover to bar diameter) are examined. Total 66 specimens were manufactured and tested according to the RILEM standard method. As the diameters of the epoxy coated reinforcements increase, the difference of bond strength between epoxy coated reinforcements and uncoated bars also increases. Epoxy coated bars showed more than 85% bond performance compared to those of uncoated bars. A new formular for estimating basic development length of epoxy coated reinforcement based on equilibrium equation is proposed using this experimental result.

• Journal of Conservation Science
• /
• v.17 s.17
• /
• pp.19-32
• /
• 2005

The exterior of Korean traditional wooden buildings have been painted with Danchung of painting method using glue and pigments. However because of losing traditional techniques and materials through the period of colonization and industrialization, many problems are occurring today. Especially after several years from painting, occurrence of scalings and flakings in painting layer is a serious problem. To improve weathering resistance of painting layer caused by stress from the difference of swelling and shrinkage between painting layer and wood plate, was examined by weathering tests. The stress is due to the hydrophilic property of wood, mechanical properties(tensile property and stress relaxation) of painting layer, and priming methods by various binders such as glue, acrylic emulsion(Primal AC-3444), acrylic resin(Paraloid B-72). Because stress relaxation of acrylic emulsion of which glasf transition temperature is below room temperature$(7^{\circ}C)$ is high, painting layers with acrylic emulsion generate no scalings and flakings and are in the most durable state in all weathering tests. Priming method which starts from low concentration to high concentration, is more effective to improve durability than other priming methods.