• Journal of Korean Society of Transportation
• /
• v.21 no.5
• /
• pp.119-133
• /
• 2003

도로는 교통기능 외에 여러 시설물을 수용할 수 있는 사회 인프라구축의 공간으로 활용될 수 있기 때문에 서울시뿐만 아니라 각 지방자치단체에서는 이러한 공간을 활용하기 위한 도로점용공사는 매년 전국적으로 수만 건에 달하고 있다. 따라서. 매년 발생하는 도로점용공사의 차로과다 점용, 교통시설물 설치 부적절, 보행자 안전무시, 공사안내표지 부적절, 공사구간에서의 불법 주.정차 등의 문제점이 계속하여 발생.지적되고 있으나 이에 따른 관련 규정이 미흡하여 도로점용공사 시행자의 불법을 초래하고 있는 실정이다. 또한 서울시의 경우 시스템적 접근방법인 관련조례에 의해서 수행되기보다는, 교통자문회의로 운영되고 있으며, 관련 인원 및 법적 제재조치가 미약하여 도로점용공사의 효과적인 관리가 어려운 실정이다. 따라서 서울시 및 각 지방자치단체에서는 도로점용공사로 인한 보행자와 운전자의 통행권 확보와 안전상의 문제 등을 하루빨리 인식하여 도로점용공사에 따른 도로공사장 교통관리 규정을 법규화 하여 체계적으로 관리할 필요가 있다. 이에 따라, 본 논문에서는 도로점용공사에 따른 관련법 및 적용대상, 관련보고서 검토, 서울시를 사례로 한 공사중 교통처리방안 운영실태 및 문제점의 진단을 통하여 향후 도로공사장 교통관리 규정의 운영적 및 제도적 측면의 개선방안과 향후 추진방향을 제시하고자 한다.

• Proceedings of the KOR-KST Conference
• /
• 1999.06a
• /
• pp.15-23
• /
• 1999

• Journal of Korean Society of Transportation
• /
• v.31 no.4
• /
• pp.58-66
• /
• 2013

Due to the characteristics of urban freeways such as heavy traffic and high speed, work zone on urban freeways causes the increase of not only the likelihood of crash occurrence but also traffic congestion caused by lane drop, lane change, acceleration/deceleration, and etc. This paper aims to determine the proper length of transition area that satisfies two criteria, mobility and safety, to make the operation of work zone more efficient. For the analysis, three different scenarios were developed by the number of lanes and the proper length of transition area were determined by changing the length from 100m to 500m in 100m increments. The results showed that the proper length of transition area for 3- and 4-lane freeways is 300m, whereas the proper length of 2-lane freeways is 200m. The results indicated that the different length of transition area based on the number of lanes is more desirable and efficient.

• Korean Architects
• /
• no.2 s.167
• /
• pp.88-96
• /
• 1983

• Journal of Korean Society of Transportation
• /
• v.31 no.1
• /
• pp.37-46
• /
• 2013

Lane closure in freeway work zone due to maintenance and repair of freeway facilities results in abrupt change of traffic flow. Sudden change of traffic flow results strong interactions among vehicles, and reduces capacity compared to the ordinary traffic condition. Such capacity reduction is likely to cause congestion, traffic queues, and economic loss cost. This study aims to determine the base capacity for a short-term freeway work zone that can be used to establish a work zone schedule in advance without any traffic impact. First, the research collected detector data and schedule data of road works on all freeways in Korea. Second, the research determined 23 study sites finding the capacity values of work zone after matching two kinds of data. All study sites had varying characteristics regarding traffic flow being adjacent to work zone during road works. The capacity values were reviewed in terms of lane closure configuration, the types of work, and design speed. Finally, research proposed capacity values for a short-term freeway work zone with the design speeds of 100 kph, 120 kph and 1,700 pcphpl, 1,750 pcphpl, respectively.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.1
• /
• pp.127-136
• /
• 2008

In these days, frequency of constructions on e freeway are increasing according as growing of the importance of e road maintenance and the road management. Work zone on the freeway where vehicles pass with high speed needs control method of lane closure and construction equipment. Because there are seldom researches in domestic study about reflecting characteristics of domestic road, sometimes we have applied for foreign cases to our traffic circumstance but it is not proper to apply for standard of other countries in our cases. foreign nation has different country square, condition of road, and level of people mind. Therefore, this study shows traffic accident characteristics in freeway work zones in Korea. At first, this study collected traffic accident data which include for 3 years $2003{\sim}2005$ in the whole freeway in Korea and then divided the data to five parts - level of the accident, type of the construction work, type of the accident, reason of the accident, according to geometric. According to comparing with non-work zones accident, this study found traffic accident characteristics in freeway work zones in Korea and suggested some alternative ideas for safety of work zones.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.663-664
• /
• 2007

지중송전선로 건설공사에 154kV 장조장 케이블 드럼개발 및 트레일러 일체형 Under Roller 방식을 이용한 포설장비를 개발하여 현장에 적용함으로써 신기술 신개발 공법 적용으로 인한 국제경쟁력 향상 뿐만 아니라 접속경간의 장조장 설계로 케이블 접속개소 감소로 인한 공사비절감과 공사기간 단축에 크게 기여하였다. 이와 동시에 공사를 위한 도로점용 단축으로 민원발생을 크게 감소시켰다. 현행 도로법 규제로 케이블의 운반중량이 제한되었던 케이블 표준 경간을 450m에서 최대 700m까지 가능하여 접속개소의 유연성이 확보되었을 뿐만 아니라 토목구조물(전력구,관로등)공사의 다양한 설계방법을 적용할 수 있게 되었다.

• Journal of Korean Society of Transportation
• /
• v.28 no.6
• /
• pp.109-120
• /
• 2010

This study aims to develop mathematical models for estimating saturation flow rates at the stop line of signalized intersection due to Workzones in the vicinity, since the saturation flow rate is the most critical parameter in capacity analysis for signalized intersections. It was found by reference review that saturation flow rates are sensitively influenced by the location of Workzone, the number of lanes, cycle length and effective green time. Extensive microscopic simulation runs were also performed and compared to the those of mathematical models for model verification. Mathematical models were developed based on traffic flow theory and dualizing them by the location of workzones. And then each result produced by changing important parameter values was carefully examined and analyzed. Small but consistent differences in saturation flow rate values between mathematical models and simulations exist. However, the pattern of changes in saturation flow rates depending on each variable was similar.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.2
• /
• pp.269-281
• /
• 2018

Unlike its archetype predecessor such as the Highway Capacity Manual of the United States, the Korean Highway Capacity Manual of 2013 provides the analytical models for estimating the saturation flow rates for the lane-occupying work-zones in the proximity of the signalized intersections. Direct application of the revised saturation flow rates into the classic control delay models, however, appears to produce unreasonable delay amount as traffic demand approaches lane-group capacities and surpasses them, which is common phenomena in the work-zones. Complex interaction among vehicles, lane-dropping work-zone geometry and signal operations were never accounted in the traditional control delay models, and considerable differences between the delay model outcomes and field observations are repeatedly experienced. This paper proposes the modified approaches to the delay models in the manual, exerted on all three elements of control delay, and particularly focuses on the temporal and spatial boundary expansion in comparing the simulated results to the estimated ones. Extensive microscopic simulation work and calibration effort supports the modified approaches well enough to use them in the work-zone planning and evaluation.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.2
• /
• pp.23-35
• /
• 2017

Work zone traffic control is of keen interest because both traffic operations and safety performances are directly affected by traffic management methods. In particular, work zone traffic on two-lane roads needs to be managed in more efficient and safer manners due to its unique characteristics of alternative right-of-way assignment. This study developed a dynamic control algorithm that can be used for real-time operations of two-lane work zone traffic. The performance of the developed algorithm was evaluated by VISSIM microscopic traffic simulator. An applied programming interface (API) based program was developed to plug-in the control algorithm onto the simulator. The results demonstrated the feasibility of the proposed control algorithm for two-lane work zone.