• Journal of the Korean Institute of Landscape Architecture
• /
• v.38 no.2
• /
• pp.75-93
• /
• 2010

Seen topographically, Busan is a city that is coastal and hilly. In the city, most parks have been formed around mountain areas that are not so useful. They also are unbalanced in location among different regions of the city. The purpose of this study is to find how to manage urban parks towards green network promotion. For the purpose, this researcher first analyzed physical and environmental characteristics of urban parks located within the main living spheres of Busan. Then, the researcher examined interactive relations between those parks and downtown areas surrounding them to classify types of the parks. In association, the researcher classified the entire of the city into inland and coastal regions. And the researcher examined mountainous and hilly urban parks that were 150 to 300 meters above sea level in the former region and 100 to 150 meters above sea level in the latter. Findings of the study can be summarized as follows. The above examination found that parks of Busan feature physically penetrating and overlapping with downtown areas of the city. How well the green zones of Busan in form of urban park are inter-connective and influential to each other heavily depends on shapes and functions that the downtown areas of the city have. In this study, urban parks of Busan were grouped according to their types and then analyzed. Based on results of the analysis, the researcher tried to find how to increase the utility of another urban parks that are expected to be formed and how to promote so-called the green network that integrates greens. Considering findings of the study, the researcher would make the following suggestions. In case of forming an urban park in a gently sloped green zone which is easily accessible and noticeable, it's important that the park should include a stream to which another green zone is converged or, if the park is located near a costal area, contribute to promote urban functions and openness. While, in a high-altitude green zone, it's more effective to form so-called the green way that consists of some limited usable site of the zone and greens behind it and then form a hub of regional community at the intersection between the main road and main gate to the urban park, contributing to the green network promotion.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.11
• /
• pp.1007-1018
• /
• 2009

Hydrocyclone is widely used in industry, because of its simplicity in design, high capacity, low maintenance and operational cost. The separation action of a hydrocyclone treating particulate slurry is a consequence of the swirling flow that produces a centrifugal force on the fluid and suspended particles. In spite of hydrocyclone have many advantage, the application for treatment of urban stormwater case study were rare. We conducted a laboratory scale study on treatable potential of micro particles using hydrocyclone filter (HCF) that was a combined modified hydrocyclone with perlite filter cartridge. Since it was not easy to use actual storm water in the scaled-down hydraulic model investigations, it was necessary to reproduce ranges of particles sizes with synthetic materials. The synthesized storm runoff was made with water and addition of particles; ion exchange resin, road sediment, commercial area manhole sediment, and silica gel particles. Experimental studies have been carried out about the particle separation performance of HCF-open system and HCF-closed system. The principal structural differences of these HCFs are underflow zone structure and vortex finder. HCF was made of acryl resin with 120 mm of diameter hydrocyclone and 250 mm of diameter filter chamber and overall height of 800 mm. To determine the removal efficiency for various influent concentrations of suspended solids (SS) and chemical oxygen demand (COD), tests were performed with different operational conditions. The operated maximum of surface loading rate was about 700 $m^3/m^2$/day for HCF-open system, and 1,200 $m^3/m^2$/day for HCF-closed system. It was found that particle removal efficiency for the HCF-closed system is better than the HCF-open system under same surface loading rate. Results showed that SS removal efficiency with the HCF-closed system improved by about 8~20% compared with HCF-open system. The average removal efficiency difference for HCF-closed system between measurement and CFD particle tracking simulation was about 4%.

• The Journal of the Korea Contents Association
• /
• v.14 no.3
• /
• pp.250-258
• /
• 2014

The purpose of this study was to promote effective health management of orthodontics patients by determining the effect that the factors related to orthodontics would have on the Oral Health Impact Profile (OHIP), and the subjects of this study was the local residents of Gangwon-do Province. The mean score of OHIP for the subjects was 2.97, while the mean score of physical factor was 3.01. The mean score of psychological factor was found to be 2.93. Thus, the orthodontics was found to have more influence on psychological factor. The item that had the greatest influence among the 10 items of Oral Health Impact Profile was found to be the question, "Have you ever felt shy due to your dental shape?" which had the mean score of 2.66. The characteristics that had significant effect on OHIP among general characteristics were found to be the age, religion, occupation, income, smoking or non-smoking status(p<0.05). In terms of the age, the age of 20 or less had the greatest effect with the mean score of 2.53. In relation to the occupation, the production/sales occupation had an influence with the mean score of 2.56 (p<0.05). Those with income exceeding KRW 4 million were found to have the mean score of 2.83 and 2.78. It turned out that the smokers had greater effect compared to the non-smokers in relation to the smoking/non-smoking status as the income was higher (p<0.05). The characteristics of orthodontics were manifested as the health perception in relation to Oral Health Impact Profile (OHIP) (p<0.05). Regarding the reason why they underwent the orthodontics, the 'uncomfortable feeling in chewing' was found to have the mean score of 2.69 and 2.67 (p<0.05). Regarding the orthodontics period, 1 to 2 years were found to have the mean score of 2.80 and 2.74, thus having an influence (p<0.05). In relation to the regret/non-regret over orthodontics, those who indicated that they regretted were found to have the mean score of 2.65 and 2.60 (p<0.05). Analysis of the relationship between Characteristics of orthodontic treatment and OHIP, orthodontic treatment reasons, oral health awareness, whether orthodontic treatment regret showed a statistically significant correlation. it is considered necessary to make constant efforts to help orthodontics patients, both physically and psychologically, in the course of treatment and improve their quality of lives.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.23 no.2
• /
• pp.53-69
• /
• 2020

The increase of the impermeable area due to industrialization and urban development distorts the hydrological circulation system and cause serious stream drying phenomena. In order to manage this, it is necessary to develop a technology for impact assessment of stream drying phenomena, which enables quantitative evaluation and prediction. In this study, the cause of streamflow reduction was assessed for dam and weir watersheds in the five major river basins of South Korea by using distributed hydrological model DrySAT-WFT (Drying Stream Assessment Tool and Water Flow Tracking) and GIS time series data. For the modeling, the 5 influencing factors of stream drying phenomena (soil erosion, forest growth, road-river disconnection, groundwater use, urban development) were selected and prepared as GIS-based time series spatial data from 1976 to 2015. The DrySAT-WFT was calibrated and validated from 2005 to 2015 at 8 multipurpose dam watershed (Chungju, Soyang, Andong, Imha, Hapcheon, Seomjin river, Juam, and Yongdam) and 4 gauging stations (Osucheon, Mihocheon, Maruek, and Chogang) respectively. The calibration results showed that the coefficient of determination (R²) was 0.76 in average (0.66 to 0.84) and the Nash-Sutcliffe model efficiency was 0.62 in average (0.52 to 0.72). Based on the 2010s (2006~2015) weather condition for the whole period, the streamflow impact was estimated by applying GIS data for each decade (1980s: 1976~1985, 1990s: 1986~1995, 2000s: 1996~2005, 2010s: 2006~2015). The results showed that the 2010s averaged-wet streamflow (Q95) showed decrease of 4.1~6.3%, the 2010s averaged-normal streamflow (Q185) showed decreased of 6.7~9.1% and the 2010s averaged-drought streamflow (Q355) showed decrease of 8.4~10.4% compared to 1980s streamflows respectively on the whole. During 1975~2015, the increase of groundwater use covered 40.5% contribution and the next was forest growth with 29.0% contribution among the 5 influencing factors.

• Journal of the Korean Geographical Society
• /
• v.48 no.1
• /
• pp.87-111
• /
• 2013

Regional disparities between eastern and western regions is the most of serious problem for balanced regional development in Turkey. The Southeastern Anatolia Project (GAP) is being implemented to eliminate these regional development disparities. The work that was initially planned as predominantly for hydraulic energy production to utilize water resources of the Tigris and Euphrates rivers more effectively was later transformed into an integrated multi-sector regional development project. This study noted that this region had very limited cash crop production because of the constraints of semi-arid climate of the southeastern region, however, later, it has changed Turkey's major cotton producing region since Southeastern Anatolia Project carried out. Therefore, this study investigated background, process, and content of the Southeastern Anatolia Project with respect to high cotton productivity in this region and examined the dynamic changes of cotton productivity in this region. In addition, Sanliurfa prefecture is one of the main development axes of the Southeastern Anatolia Project, because government investments are concentrated on this prefecture. Therefore, this study examined the background and process of cotton farming growth in this prefecture. In 2011, Sanliurfa prefecture produced 37.6% of Turkey's total cotton production. This is mainly due to agricultural infrastructure expansion such as land consolidation, irrigation, roads and farm roads. Also, it is one of the main factor that subsidies paid to farmers for cotton cultivation. The introduction of irrigation has dramatically changed the direction of seasonal migration of this area. Prior to irrigation, this area had a serious social issue about out-migration for seasonal labor to other areas. However, the introduction of irrigation made this area that changed to in-migration and intramigration for cotton cultivation. Irrigation water is supplied to farmers through the WUAs (Water User Associations) that handed over irrigation water management, operation from DSI (General Directorate of State of Hydraulic Works). However, the WUAs are under the influence of Ashiret, a traditional feudal social structure. Because of this reason, it does not have an efficient management for farmers. Also, it is one of the reasons that this area does not have autonomous farmer organization.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.45 no.3
• /
• pp.21-29
• /
• 2017

In this study of visitor place attachment to parks, Scannel and Gilford considered the dimensions of place attachment, and proposed the theoretical framework of PPP(Place, Person, Process) that should be systematically studied from the perspective of person, place and psychological processes. According to Scannel's theoretical basis, this paper puts forward the hypothesis of a structure model of place attachment. In the model, the five independent variables of people, places, cognition, emotion, and behavior have influenced the dependent variable of place attachment. The questionnaire was conducted on 18 neighborhood parks in Kunming, China, and the residents of the 5 neighborhood parks in Daejeon, South Korea. A total of 1,645 valid samples of the questionnaire survey were collected. Through confirmatory factor analysis(CFA) results of the inspection of the various elements, it was shown that the reliabilities of 6 latent variables, such as people, places, cognition, affection, behavior and place attachment, which were composed with the observed variables(30 observed variables in Daejeon, 19 observed variables in Kunming), were all above 0.7 and the data were fit for this study. The hypothesis test results found that the physical environment of the neighborhood parks such as a comfortable environment, pleasant road and convenient facilities would increase the rate of visitors coming back. From the park management perspective, to increase the amount of visitors to the park, the park should increase visibility, provide more organized, varied activities and meetings, or special exhibitions according to the particular characteristics of the individual park, to increase awareness of the park. From the park visitors' psychological perspective, visitors are seeking to enjoy the park facilities and environment not only to bring physical relaxation, but also to bring about a psychological cure. With the commonality of attachment structure between the two countries, to improve the place attachment of neighborhood park visitors, collecting regularly visitor feedback will facilitate the sustainable development of neighborhood park attachment.

• Journal of the Korean Geographical Society
• /
• v.36 no.4
• /
• pp.474-482
• /
• 2001

The purpose of this study is to investigate the formation and development processes of beach resort by fabric construction in a island environment. The results are as follows. (1) The research area(Tong-ri beach, Bokil-myon, Chollanam-do)has been transformed to belch by sedimentary environmental change since latter half of 1800's. (2) The mean slope of beach face is 0.96°, and the difference of attitude between beach and mud flat face is 75cm. (3) The mean particle size of beach surface sediment is 3.53$\Phi$. This value is very finer than that of any other beach in Korea peninsula. But its value is coarser than that of mud flat surface sediment. (4) The particle size distribution of core sediment is become changed to fine particle in 70cm depth. This value is corresponded to difference of altitude between beach face and mud flat face. (5) The analysis of aerial photographs after 1970 indicates that sedimentation process was not brisked since 1970's. Consequently, the research ares has been developed by sedimentary environmental change for sea-level rise effect and wave height energy rise effect.

• Journal of Aquaculture
• /
• v.13 no.4
• /
• pp.339-351
• /
• 2000

Optimal environmental conditions, that sustained fastest growth, lowest mortality and abnormality of the scallop Patinopecten yessoensis, were identified from field experiments undertaken at Chumunjin during 1991-1998. Temperature within the water column 10~30 m depth ranged between 5 and 23$^{\circ}C$; high temperature and daily fluctuation resulted in growth retardation and heavy mortality of the scallop. Optimal salinity range was between 31.5 and 34.5%0 and water transparency 6.0 and 18.1 m, which was significantly affected by phytoplankton density. Chlorophyll concentration ranged between 0.04 and 3.51 f.lgfL. Low temperature and high chlorophyll concentration appear to support faster growth of the scallop. Optimal periods of transplantation for intermediate culture were between mid July and early November: cultured under high density during July-August as a first step and under low density during mid September through early November as a second step. Optimal stocking density in square net cage (<35${\times}$35 em) for intermediate culture was 30-40 individuals per cage for main culture using lantern net and 80 -100 individuals of the size of 1.5 ~ 3.0 em shell height per cage for sowing culture. During the intermediate culture, the highest growth was realized, when the cage was held at water depth between 10 and 15 m. Water depth below 25 m, however, was best to avoid mass mortality during the periods of abnormally high water temperature and high variation of water temperature. The daily growth rate during the intermediate culture was between 0.019~0.381 mm; low in January and February but high in March and April. It is suggested that the main culture is commenced before June under low stocking density to avoid the possibility of mass mortality during summer by high water temperature.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.3A
• /
• pp.235-249
• /
• 2011

A new form of I-type PSC bridge girder, which has hole in the web, is proposed in this paper. Three different concepts were combined and implemented in the design. First of all, a girder was precast at a manufacturing plant as divided pieces and assembled at the construction site using post-tensioning method, and the construction period at the site will be reduced dramatically. In this way, the quality of concrete can be assured at the manufacturing factory and concrete curing can be well controlled, and the spliced girder segments can be moved to the construction site without a transportation problem. Secondly, a numerous number of holes was made in the web of the girder. This reduces the self-weight of the girder. But more important thing related to the holes is that about half of the total anchorages can be moved from the girder ends into individual holes. The magnitude of negative moment developed at girder ends will be reduced. Also, since the longitudinal compressive stresses are reduced at ends, thick end diaphragm is not necessary. Thirdly, Prestressing force was introduced into the member through multiple stages. This concept of multi-stage prestressing method overcomes the prestressing force limit restrained by the allowable stresses at each loading stage, and maximizes the magnitude of applicable prestressing force. It makes the girder longer and shallower. Two 50 meter long full scale girders were fabricated and tested. One of them was non-spliced, or monolithic girder, made as one piece from the beginning, and the other one was assembled using post-tensioning method from five pieces of segments. It was found from the result that monolithic and spliced girder show similar load-deflection relationships and crack patterns. Girders satisfied specific girder design specification in flexural strength, deflection, and live load deflection control limit. Both spliced and monolithic holed web post-tensioned girders can be used to achieve span lengths of more than 50m with the girder height of 2 m.

• Weed & Turfgrass Science
• /
• v.7 no.2
• /
• pp.140-147
• /
• 2018

In Korea, mowing the grass of a grave (Beolcho) is a very important event preceded by Chuseok (Korean thanks giving day) and Si-Hyang (annual ancestral feast). Because Beolcho usually takes place one or two weeks before Chuseok, the traffic accidents on roads are getting worse and safety accidents are getting more and more. Erroneous Beolcho methods can cause the soil to be exposed and cause the loss of soil or the low shoot density of graveyard grass or weed occurrence. Therefore, the dispersion of the Beolcho timing and the approprite method can be import issues. The present study assessed the effects of grass mowing timing and height before Chuseok on the growth of Zoysia japonica and Z. matrella. The mowing timing was evaluated at 1 week, 2 weeks, 3 weeks, and 4 weeks before Chuseok, and the mowing height differently according to the two type of grass. In Z. japonica, the faster mowing before Chuseok, the longer the plant height, and the coverage rate and shoot density were higher. In Z. matrella, the faster mowing, the longer the shoot length, but the coverage rate and shoot density did not show any difference or tendency. As compared to Z. japonica, the plant height of Z. matrella was kept short regardless of the time of mowing. In both grasses, the plant height was shortened when mowing was done at low cutting height, but the coverage rate and shoot density were decreased. In addition, it was shown that it is advantageous to maintain the shoot density of graveyard lawn by 40-50 mm or 30-40 mm cutting above the ground for Z. japonica or Z. matrella, respectively.