• The Korean Journal of Nuclear Medicine
• /
• v.30 no.4
• /
• pp.548-559
• /
• 1996

A series of performance measurements of positron emission tomography (PET) were performed following the recommendations of the Computer and Instrumentation Council of the Society of Nuclear Medicine and the National Electrical Manufacturers Association. We investigated the performance of the General Electric $Advance^{TM}$ PET. The measurements include the basic intrinsic tests of spatial resolution, scatter fraction, sensitivity, and count rate losses and randoms. They also include the tests of the accuracy of corrections: count rate linearity correction, uniformity correction, scatter correction and attenuation correction. GE $Advance^{TM}$ PET has bismuth germanate oxide crystals (4.0mm transaxial ${\times}$ 8.1mm axial ${\times}$ 30.0mm radial) in 18 rings, which form 35 imaging planes spaced by 4.25mm. The system has retractable tungsten septa 1mm thick and 12cm long. Transaxial resolution was 4.92mm FWHM in 2D and 5.14mm FWHM in 3D at the center. Average axial resolution in 2D decreased from 3.91mm FWHM at the center to 6.49mm FWHM at R=20cm. Average scatter fraction of direct and cross slices was 9.57%. Dead-time losses of 50% corresponded to a radioactivity concentration of $4.86{\mu}Ci/cc$ and a true count rate of 519 kcps in 2D. The accuracy of count rate linearity correction was 1.84% at the activity of $4.50{\mu}Ci/cc$. Non-uniformity was 2.06% in 2D and 2.93% in 3D. Remnant errors after scatter correction were 0.55% in 2D and 4.12% in 3D. The errors of attenuation correction were 6.21% (air), 0.20% (water), -6.32% (teflon) in 2D and 5.00% (air), 6.94% (water), 3.01% (teflon) in 3D. The results indicate the performance of GE $Advance^{TM}$ PET scanner to be well suited for clinical and research applications.

• Journal of Embryo Transfer
• /
• v.21 no.2
• /
• pp.157-162
• /
• 2006

It is well known that unidentified factors in sera, hormones and growth factors promote the proliferation of granulosa cells and nuclear maturation of bovine COCs (cumulus oocytes complexes) in vitro. Attempts had been developed the simple composition of culture media and similar system to in vivo conditions has been applied. In the present study, we investigated the effect of FGF (fibroblast growth factor) on in vitro maturation and in vitro development of Hanwoo COCs. When the COCs were matured in HPM 199 (Inst. of Functional peptide, Japan) containing 0.1, 1 and 10 ng/ml FGF for 24 hr, maturation rates to metaphase II ($70.0{\sim}75.0%$) were significantly higher (p<0.05) than that of control group (0 ng/ml FGF, 37.5%). When matured COCs with FGF were cultured in maturation medium after in vitro fertilization, developmental rates to blastocysts were 9.5, 0 and 2.9%, respectively, compared to 25.0% of the control group (p<0.05). When the matured COCs with FGF were cultured in HPM 199 (IFP971, Inst. of Functional peptide, Japan) containing 10% FBS, 0.8% BSA or 0.1% PVA (polyvinyl alcohol), the blastocyst formation rates were 12.4, 12.8 and 8.5%, respectively, while the rates of matured COCs with FGF and cultured with IVMD and IVD (Inst. of Functional peptide, Japan) without serum were 38.4% and 34.8%, respectively (p<0.05). These results suggested that FGF is available for in vitro maturation of bovine COCs and is not suitable for in vitro development, but further investigation would be need for finding the synergistic autocrine/paracrine fashion of other growth factors in early bovine embryo development.

• Journal of Korean Society of Transportation
• /
• v.24 no.5 s.91
• /
• pp.89-108
• /
• 2006

Korea has been entering the ageing society as the population of age over 65 shared over 7% since the year 2000. The ageing society needs to have transportation facility considering elderly people's travel behavior. This study aims to understand the elderly people's travel behavior using recent data in Korea. The activity schedule approach begins with travel outcomes are part of an activitv scheduling decision. For tho?e approach. used discrete choice models (especially. Nested Logit Model) to address the basic modeling problem capturing decision interaction among the many choice dimensions of the immense activity schedule choice set The day activity schedule is viewed as a sot of tours and at-home activity episodes tied togather with overarching day activity pattern using the Seoul Metropolitan Area Transportation Survey data, which was conducted in June, 2002. Decisions about a specific tour in the schedule are conditioned by the choice of day activity pattern. The day activity scheduling model estimated in this study consists of tours interrelated in a day activity pattern. The day activity pattern model represents the basic decision of activity participation and priorities and places each activity in a configuration of tours and at-home episodes. Each pattern alternative is defined by the primary activity of the day, whether the primary activity occurs at home or away, and the type of tour for the primary activity. In travel mode choice of the elderly and non-workers, especially, travel cost was found to be important in understanding interpersonal variations in mode choice behavior though, travel time was found to be less important factor in choosing travel mode. In addition, although, generally, the elderly was likely to choose transit mode, private mode was preferred for the elderly over 75 years old owing to weakened physical health for such things as going up and down of stairs. Therefore. as entering the ageing society, transit mode should be invested heavily in transportation facility Planning tor improving elderly transportation service. Although the model has not yet been validated in before-and-after prediction studies. this study gives strong evidence of its behavioral soundness, current practicality. and potential for improving reliability of transportation Projects superior to those of the best existing systems in Korea.

• Journal of the Korean Chemical Society
• /
• v.66 no.2
• /
• pp.78-85
• /
• 2022

Natural white clay was treated with 6 M of H₂SO₄ and heated at 80℃ for 6 h under mechanical stirring and the resulting acid active clay was used as an adsorbent for the removal of Cs⁺ in water. The physicochemical changes of natural white clay and acid active clay were observed by X-ray Fluorescence Spectrometry (XRF), BET Surface Area Analyser and Energy Dispersive X-line Spectrometer (EDX). While activating natural white clay with acid, the part of Al₂O₃, CaO, MgO, SO₃ and Fe₂O₃ was dissolved firstly from the crystal lattice, which bring about the increase in the specific surface area and the pore volume as well as active sites. The specific surface area and the pore volume of acid active clay were roughly twice as high compared with natural white clay. The adsorption of Cs⁺ on acid active clay was increased rapidly within 1 min and reached equilibrium at 60 min. At 25 mg L^- of Cs⁺ concentration, 96.88% of adsorption capacity was accomplished by acid active clay. The adsorption data of Cs⁺ were fitted to the adsorption isotherm and kinetic models. It was found that Langmuir isotherm was described well to the adsorption behavior of Cs⁺ on acid active clay rather than Freundlich isotherm. For adsorption Cs⁺ on acid active clay, the Langmuir isotherm coefficients, Q, was found to be 10.52 mg g^-1. In acid active clay/water system, the pseudo-second-order kinetic model was more suitable for adsorption of Cs⁺ than the pseudo-first-order kinetic model owing to the higher correlation coefficient R² and the more proximity value of the experimental value q_e,exp and the calculated value q_e,cal. The overall results of study showed that acid active clay could be used as an efficient adsorbent for the removal of Cs⁺ from water.

• Korea Science and Art Forum
• /
• v.25
• /
• pp.103-118
• /
• 2016

Due to the rapid development of ICT, corporate business models quickly changed and because of the radical growth of IT technology, sequential or gradual survival has become difficult. Internet-based new businesses such as IT service companies are seeking for new convergence business models that have not existed before to create business models that are more competitive, but the economic efficiency of business models that were successful in the past is wearing off. Yet, as reaching the critical point where the platform value becomes extremely high for platforms via the Internet is happening at a much higher speed than before, platform-ization has become a very important condition for rapid business expansion for all kinds of businesses. This study analyzes the necessity of establishing platform business models in IT service planning and identifies their characteristics through case analyses of platform business models. The results derived features First, there is a need to ensure sufficient buyers and sellers, and second, platform business model should provide customers with distinctive value of the only platforms are generating. third, the common interests between platform-driven company and a partner, participants Should be existing. Fourthly, by expanding base of participants and upgrades, expansion of adjacent areas we must have a continuous scalability and evolution must be sustainable. While it is expected that the identified characteristics will cause tremendous impacts to the establishment of platform business models and to the graphing of service planning, we also look forward to this study serving as the starting point for the establishment of theories of profit models for platform businesses, which were not mentioned in the study, so that planners responsible for platform-based IT service planning will spend less time and draw bigger schemes in building planning drafts.

• Korean Journal of Breeding Science
• /
• v.51 no.4
• /
• pp.386-394
• /
• 2019

Rehmannia glutinosa, one of the major medicinal crops in Korea, can be classified into three types: fresh, dried and prepared Rehmannia root. In this study, the quality characteristics of prepared rehmannia root were evaluated using four different cultivars that are commonly used in the market. In making prepared rehmannia root, roots of Jihwang 1, Kokang, Togang, and Dagang were dried, soaked in rice wine, and steamed nine times. At each stage, physiochemical properties were analyzed, including yield, which is one of the most important industrial factors to consider. The yield was the highest in Togang at 23.61% and the lowest in Dagang at 21.16%. These yield values showed a highly negative correlation with the moisture content of roots. The fructose and glucose contents were increased during the 3^rd, 4^th and 5^th steaming but then decreased. The sucrose, raffinose, and stachyose content gradually decreased during the first three steaming and were not detected during the 4^th steaming. Additionally, the catalpol content was not detected after the 4^th steaming. On the contrary, the 5-hydroxymethylfurfural content was not detected in the raw root but increased during the steaming. Jihwang1 and Togang exceeded the 0.1% Korean Pharmacopoeia standard after the 5^th steaming, reaching it faster than did the other cultivars. Overall, Togang was the optimal cultivar considering the overall characteristics of its high yield and short steaming time. These results could provide useful information for the industrial use of prepared Rehmannia root based on the requirements and characteristics of each cultivar.

• The Journal of Korean Society for Radiation Therapy
• /
• v.30 no.1_2
• /
• pp.107-116
• /
• 2018

Purpose : Intensity-modulated radiation therapy(IMRT) has been widely used for radiation therapy of Prostate Cancer because it can reduce radiation adverse effects on normal tissues and deliver more dose to the Prostate than 3D radiation therapy. Volumetric modulated arc therapy(VMAT) has been widely used due to recent advances in equipment and treatment techniques. VMAT can reduce treatment time by up to 55 % compared to IMRT, minimizing motion error during treatment. Materials and Methods : In this study, compared the MU and DVH values of 10 patients with prostate cancer by classifying them into 4 groups with 5 LN-Prostate groups and 5 Only-Prostate. And DQA measurements were performed using ArcCHECK and MapCHECK. Results : The results of Target and OAR dose distribution of Prostate patients are as follows. $D_{max}$ was in the range of 100~110 % in 4 groups, and more than 110 % of hot spot was not seen. Only-Prostate ($P_1$, $P_2$) without LN had a satisfactory dose distribution for the target dose, but slightly better for 2 arc plan($P_2$) than 1 arc plan($P_1$). The target dose $D_{98%}$ distribution in the LN-Prostate ($P_{L1}$, $P_{L2}$) group showed better 2 arc plan($P_{L2}$) than 1 arc plan($P_{L1}$), But in the case of 1 arc plan($P_{L1}$), the target dose $D_{98%}$ value was not enough. In OAR, the dose distribution of 1 Arc($P_1$) Plan and 2 Arc($P_2$) Plan in the Only-Prostate ($P_1$, $P_2$) Group satisfied the prescribed dose value. But, The dose distribution of 1 arc($P_1$) was slightly higher. In LN-Prostate OAR, 1 Arc($P_{L1}$) Plan showed higher dose than the prescribed dose. The Gamma evaluation pass rate of ArcCHECK and MapCHECK calculated from the DQA measurements was slightly higher than 99 % and the mean error range of the point dose measurements using the CC04 ion chamber was less than 1 %. Conclusion : In this study, Only-Prostate ($P_1$, $P_2$) group, the dose of 2 Arc plan was better. However, considering the treatment time and MU value, 1 Arc treatment method was more suitable. In the LN-Prostate ($P_{L1}$, $P_{L2}$) group, 2 Arc($P_{L2}$) treatment method showed better results and satisfied with Target $D_{98%}$ and OAR prescription dose.

• Journal of the Korean Wood Science and Technology
• /
• v.13 no.1
• /
• pp.19-62
• /
• 1985

This study was performed to investigate: (i) the bending processing properties of silk worm oak (Quercus acutissima Carr.) and Korean red pine (Pinus densiflora S. et Z.) by boiling and steaming treatments; (ii) the effects of interrelated factors - sapwood and heartwood, annual ring placement, softening temperature and time, moisture content. and wood defects on bending processing properties; (iii) the changing rates of bending radii after release from a tension strap, and (iv) the improving methods of bending process by treatment with chemicals. The size of specimens tested was $15{\times}15{\times}350mm$ for boiling and steaming treatments and $5{\times}10{\times}200mm$ for treatments with chemicals. The specimens were green for boiling treatments and dried to 15 percent for steaming treatments. The specimens for treatments with chemicals were soaked in saturated urea solution, 35 percent formaldehyde solution, 25 percent polyethylene glycol -400 solution, and 25 percent ammonium hydroxide solution for 5 days and immediately followed the bending process, respectively. The results obtained were as follows: 1. The internal temperature of silk worm oak and Korean red pine by boiling and steaming time was raised slowly to $30^{\circ}C$ but rapidly from $30^{\circ}C$ to $80-90^{\circ}C$ and then slowly from $80-90^{\circ}C$ to $100^{\circ}C$. 2. The softening time required to the final temperature was directly proportional to the thickness of specimen. The time required from $25^{\circ}C$ to $100^{\circ}C$ for 15mm-squared specimen was 9.6-11.2 minutes in silk worm oak and 7.6-8.1 minutes in Korean red pine. 3. The moisture content (M.C.) of specimen by steaming time was increased rapidly first 4 minutes in the both species, and moderately from 4 to 20 minutes and then slowly and constantly in silk worm oak, and moderately from 4 to 15 minutes and then slowly and constantly in Korean red pine. The M.C. of 15mm-squared specimen in 50 minutes of steaming was increased to 18.0 percent in the oak and 22.4 percent in the pine from the initial conditioned M.C. of 15 percent The rate of moisture adsorption measured was therefore faster in the pine than in the oak. 4. The mechanical properties of the both species were decreased significantly with the increase of boiling rime. The decrement by the boiling treatment for 60 minutes was measured to 36.6-45.0 percent in compressive strength, 12.5-17.5 percent in tensile strength, 31.6-40.9 percent in modulus of rupture, and 23.3-34.6 percent in modulus of elasticity. 5. The minimum bending radius (M.B.R.) of sapwood and heartwood was 60-80 mm and 90 mm in silk worm oak, and 260 - 300 mm and 280 - 300 mm in Korean red pine, respectively. Therefore, the both species showed better bending processing properties in sapwood than in heartwood. 6. The M.B.R. of edge-grained and flat-grained specimen in suk worm oak was 60-80 mm, but the M.B.R. in Korean red pine was 240-280 mm and 260-360 mm, respectively. Comparing the M.B.R. of edge-grained with flat-grained specimen, in the pine the edge-grained showed better bending processing property than the flat-grained. 7. The bending processing properties of the both species were improved by the rising of softening temperature from $40^{\circ}C$ to $100^{\circ}C$. The minimum softening temperature for bending was $90^{\circ}C$ in silk worm oak and $80^{\circ}C$ in Korean red pine, and the dependency of softening temperature for bending was therefore higher in the oak than in the pine. 8. The bending processing properties of the both species were improved by the increase of softening time as well as temperature, but even after the internal temperature of specimen reaching to the final temperature, somewhat prolonged softening was required to obtain the best plastic conditions. The minimum softening time for bending of 15 mm-squared silk worm oak and Korean red pine specimen was 15 and 10 minutes in the boiling treatment, and 30 and 20 minutes in the steaming treatment, respectively. 9. The optimum M.C. for bending of silk worm oak was 20 percent, and the M.C. above fiber saturation point rather degraded the bending processing property, whereas the optimum M.C. of Korean red pine needed to be above 30 percent. 10. The bending works in the optimum conditions obtained as seen in Table 24 showed that the M.B.R. of silk worm oak and Korean red pine was 80 mm and 240 mm in the boiling treatment, and 50 mm and 280 mm in the steaming treatment, respectively. Therefore, the bending processing property of the oak was better in the steaming than in the boiling treatment, but that of the pine better in the boiling than in the steaming treatment. 11. In the bending without a tension strap, the radio r/t of the minimum bending radius t to the thickness t of silk worm oak and Korean red pine specimen amounted to 16.0 and 21.3 in the boiling treatment, and 17.3 and 24.0 in the steaming treatment, respectively. But in the bending with a tension strap, the r/t of the oak and the pine specimen decreased to 5.3 and 16.0 in t he boiling treatment, and 3.3 and 18.7 in the steaming treatment, respectively. Therefore, the bending processing properties of the both species were significantly improved by the strap. 12. The effect of pin knot on the degradation of bending processing property was very severe in silk worm oak by side, e.g. 90 percent of the oak specimens with pin knot on the concave side were ruptured when bent to a 100 mm radius but only 10 percent of the other specimens with pin knot on the convex side were ruptured. 13. The changing rate in the bending radius of specimen bent to a 300 mm radius after 30 days of exposure to room temperature conditions was measured to 4.0-10.3 percent in the boiling treatment and 13,0-15.0 percent in the steaming treatment. Therefore, the degree of spring back after release was higher in the steaming than in the boiling treatment. And the changing rate of moisture-proofing treated specimen by expoxy resin coating was only -1.0.0 percent. 14. Formaldehyde, 35 percent solution, and 25 percent polyethylene glycol-400 solution found no effect on the plasticization of the both species, but saturated urea solution and 25 percent ammonium hydroxide solution found significant effect in comparison to non-treated specimen. But the effect of the treatment with chemicals alone was inferior to that of the steaming treatment, and the steaming treatment after the treatment with chemicals improved 10-24 percent over the bending processing property of steam-bent specimen. 15. Three plasticity coefficients - load-strain coefficient, strain coefficient, and energy coefficient - were evaluated to be appropriate for the index of bending processing property because the coefficients had highly significant correlation with the bending radius. The fitness of the coefficients as the index was good at load-strain coefficient, energy coefficient, and strain coefficient, in order.

• Progress in Medical Physics
• /
• v.23 no.1
• /
• pp.15-25
• /
• 2012

The aim of this study is to evaluate plan quality and dose accuracy for Volumetric Modulated Arc Therapy (VMAT) on the TG-119 and is to investigate the effects on variation of the selectable optimization parameters of VMAT. VMAT treatment planning was implemented on a Varian iX linear accelerator with ARIA record and verify system (Varian Mecical System Palo Alto, CA) and Oncentra MasterPlan treatment planning system (Nucletron BV, Veenendaal, Netherlands). Plan quality and dosimetric accuracy were evaluated by effect of varying a number of arc, gantry spacing and delivery time for the test geometries provided in TG-119. Plan quality for the target and OAR was evaluated by the mean value and the standard deviation of the Dose Volume Histograms (DVHs). The ionization chamber and $Delta^{4PT}$ bi-planar diode array were used for the dose evaluation. For treatment planning evaluation, all structure sets closed to the goals in the case of single arc, except for the C-shape (hard), and all structure sets achieved the goals in the case of dual arc, except for C-shape (hard). For the variation of a number of arc, the simple structure such as a prostate did not have the difference between single arc and dual arc, whereas the complex structure such as a head and neck showed a superior result in the case of dual arc. The dose distribution with gantry spacing of $4^{\circ}$ was shown better plan quality than the gantry spacing of $6^{\circ}$, but was similar results compared with gantry spacing of $2^{\circ}$. For the verification of dose accuracy with single arc and dual arc, the mean value of a relative error between measured and calculated value were within 3% and 4% for point dose and confidence limit values, respectively. For the verification on dose accuracy with the gantry intervals of $2^{\circ}$, $4^{\circ}$ and $6^{\circ}$, the mean values of relative error were within 3% and 5% for point dose and confidence limit values, respectively. In the verification of dose distribution with $Delta^{4PT}$ bi-planar diode array, gamma passing rate was $98.72{\pm}1.52%$ and $98.3{\pm}1.5%$ for single arc and dual arc, respectively. The confidence limit values were within 4%. The smaller the gantry spacing, the more accuracy results were shown. In this study, we performed the VMAT QA based on TG-119 procedure, and demonstrated that all structure sets were satisfied with acceptance criteria. And also, the results for the selective optimization variables informed the importance of selection for the suitable variables according to the clinical cases.

• Trans-
• /
• v.3
• /
• pp.109-135
• /
• 2017

The purpose of this thesis is to analyze characteristics of everyday movement showed in performances of Steve Paxton. A work of art has been realized as a special object enjoyed by high class people as high culture for a long time. Therefore, a gap between everyday life and art has been greatly existed, and the emergence of everyday elements in a work of art means that public awareness involving social change is changed. The postmodernism as the period when a boundary between art and everyday life is uncertain was a postwar society after the Second World War and a social situation that rapidly changes into a capitalistic society. Changes in this time made scholars gain access academically concepts related to everyday life, and affected artists as the spirit of the times of pluralistic postmodernism refusing totality. At the same period of the time, modern dance also faced a turning point as post-modern dance. After the Second World War, modern dance started to be evaluated as it reaches the limit, and at this juncture, headed by dancers including the Judson Dance Theatre. Acting as a dancer in a dance company of Merce Cunningham, Steve Paxton, one of founders of the Judson Dance Theatre, had a critical mind of the conditions of dance company with the social structure and the process that movement is made. This thinking is showed in early performances as an at tempt to realize everyday motion it self in performances. His early activity represented by a walking motion attracted attention as a simple motion that excludes all artful elements of existing dance performances and is possible to conduct by a person who is not a dancer. Although starting the use of everyday movement is regarded as an open characteristic of post-modern dance, advanced researches on this were rare, so this study started. In addition, studies related to Steve Paxton are skewed towards Contact Improvisation that he rose as an active practician. As the use of ordinary movement before he focused on Contact Improvisation, this study examines other attempts including Contact Improvisation as attempts after the beginning of his performances. Therefore, the study analyzes Satisfyin' Lover, Contact at 10th & 2nd and Bound that are performances of Steve Paxton, and based on this, draws everyday characteristics. In addition, related books, academic essays, dance articles and reviews are consulted to consider a concept related to everyday life and understand dance historical movement of post-modern dance. Paxton attracted attention because of his activity starting at critical approach of movement of existing modern dance. As walking of performers who are not dancers, a walking motion showed in Satisfyin' Lover gave esthetic meaning to everyday movement. After that, he was affected by Eastern ideas, so developed Contact Improvisation making a motion through energy of the natural laws. In addition, he had everyday things on his performances, and used a method to deliver various images by using mundane movement and impromptu gestures originating from relaxed body. Everyday movement of his performances represents change in awareness of performances of the art of dancing that are traditionally maintained including change of dance genre of an area. His activity with unprecedented attempt and experimentation should be highly evaluated as efforts to overcome the limit of modern dance.