• Journal of Conservation Science
• /
• v.31 no.1
• /
• pp.29-35
• /
• 2015

Investigation on relics was performed by dividing the site of Samheung-ri, Gangjin-gun, Jeonranam-do into six districts, A to F, and as a result, total 16 kilns including Celadon kilns and pottery kilns were found. Among them, total 9 kilns found from A D E F districts including 3 Celadon kilns, 6 pottery kilns, went through archaeomagnetic analysis with baked earth samples collected from them. Since those baked earth samples showed good baking conditions as well as high soil quality, it was possible to gain archaeomagnetic data with high reliability. Through archaeomagnetic analysis, it was possible to obtain archaeomagnetic dating for each of the 9 kilns corresponding to the period between A.D. 990~1250, and the results also correspond to archaeological dating estimated to fall under the period of Goryeo. Also, it was examined if there was any difference in the operational periods of the kilns by districts, and there was difference of periods from archaeomagnetic dating in the order of district D(A.D.1100) ${\rightarrow}$ E F(A.D.1180) ${\rightarrow}$ A(A.D.1210). This result tells us that the kilns in district D stopped operating the earliest and were deserted, and next, those in districts E and F almost at the same time, and lastly, those in district A operated to the last and then were disposed.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.12
• /
• pp.1086-1092
• /
• 2012

It has been studied for DGPS/INS(Differential Global Positioning System/Inertial Navigation System) to offer the more precise and reliable navigation data with the aviation industry development. The flight performance evaluation of navigation system is very significant because the reliability of navigation data directly affect the safety of aircraft. Especially, the high-level navigation system, as DGPS/INS, need more precise flight performance evaluation method. The performance analysis is performed by comparing between the DGPS/INS navigation data and reference trajectory which is more precise than DGPS/INS. The GPS receiver, which is capable of post-processed CDGPS(Carrier-phase DGPS) method, can be used as reference system. Generally, the DGPS/INS is estimated the CG(Center of Gravity) point of aircraft while the reference system is output the position of GPS antenna which is mounted on the outside of aircraft. For this reason, estimated error between DGPS/INS and reference system will include the error due to lever arm. In order to more precise performance evaluation, it is needed to compensate the lever arm. This paper presents procedure and result of flight test which includes lever arm compensation in order to verify reliability and performance of DGPS/INS more precisely.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.535-539
• /
• 2010

This paper include to study DoA(Direction of Arrival) for radio collection and monitoring system. The direction finding calculated by applying the CVDF (Correlation Vector Direction Finding) algorithm for the five circular dipole antenna over V / UHF band. To improve the accuracy of direction finding by applying CVDF algorithm needs to obtain ideal phase difference each antennas. However, a circular array antenna phase difference pattern may be distorted on a specific frequency band or to particular direction. The effect of installing each array antennas circularly and the effect of the interference of center pole (located in the center of a circular array antenna mount) may make the distortion of phase pattern. If you use an active antenna instead of passive antenna to obtain good sensitivity, you would measure the more distortion. This paper propose how to change combination of antennas to measure the phase in real-time and how to use antenna beam patterns for minimizing the degradation phenomena at applying simple CVDF algorithm and increasing the direction finding capability.

• Korea journal of population studies
• /
• v.31 no.1
• /
• pp.75-97
• /
• 2008

Recently Korea is expected with the decrease of population in working ages and also population structure, especially age structure, has changed as aging goes faster. This study focuses on the relationship between age structure and wage structure to analyzes the cohort size effect on the change of age-earnings profile. Our empirical analysis based on Wright(1991)'s model takes weighted OLS regression using the male worker's data of Ministry of Labor 'Wage Structure Survey'($1990{\sim}2006$). In pooled data, we take the conclusion that the cohort size effect was found in high school and college graduate workers, but the effect is different between them. The labor market entry effect of high school graduate workers is negative(-) and his persistent effect is positive(+). On the other hand, the cohort size effect of college graduate workers have appeared the opposite directions in contrary with the existing results of Welch(1979) and Wright(1991). This results are seen as the possibility that college graduate worker has the benefit of wage level by his relative cohort size in spite of high unemployment of young graduate. It will be the sign of need that we should interest in the change of age structure with balancing the labor supply side approach and the demand side study which the previous studies was mainly tended to focus on.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.1
• /
• pp.80-90
• /
• 2001

The aim of this study is to develop the methodology which enables to identify the mechanical properties of element such as stress intensity factor by using the AE parameters. Considering the multivariate and nonlinear properties of AE parameters such as ringdown count, rise time, energy, event duration and peak amplitude from fatigue cracks of machine element the principal component regression(PCR) and artificial neural network(ANN) models for the estimation of stress intensity factor were developed and validated. The AE parameters were found to be very significant to estimate the stress intensity factor. Since the statistical values including correlation coefficients, standard mr of calibration, standard error of prediction and bias were stable, the PCR and ANN models for stress intensity factor were very robust. The performance of ANN model for unknown data of stress intensity factor was better than that of PCR model.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2006.06a
• /
• pp.130-137
• /
• 2006

본 논문은 디지털홈서비스의 실제 이용자들에 대한 실증분석을 통해 수용에 영향을 미치는 요인들을 밝히기 위한 연구이다. 디지털홈서비스의 특성에 맞게 기술수용모형(TAM)을 확장, 수정된 연구모형을 개발, 가설을 설정하여 분석하였다. 외부변수로 이용자의 특성을 채택하였으며, 디지털홈서비스가 가정 내 기술임을 고려하여 신념변수로 '지각된 이용용이성'과 '시각된 즐거움'외에 '지각된 편의성', '지각된 안전성', '지각된 삶의 질 향상'이라는 변수를 추가하였고 종속변수로는 '이용행동'을 설정하였다. 205명의 실제 이용자를 대상으로 한 설물조사 중 201개의 유효표본을 분석하였고, 신뢰성과 타당성 모두 통계적으로 적합한 것으로 나타났다. AMOS 4를 이용한 구조방정식 모형분석을 통해 24개의 가설검증 결과, 13개의 가설이 채택되었다. 이용자 개인의 특성 중 경험과 교육훈련은 지각된 이용용이성에 정(+)의 영향을 미쳤으며 혁신성은 지각된 즐거움, 지각된 편의성, 지각된 안전성, 지각된 삼의 질 향상에 대하여 정(+)의 영향을 미치고 있었다. 또한 지각된 이용용이성이 다른 신념변수인 지각된 즐거움, 지각된 편의성, 지각된 안전성, 지각된 삶의 질 향상에 정의 영향을 미치고 있었다. 종속변수인 이용행동에는 지각된 즐거움과 지각된 편의성, 지각된 삶의 질 향상이 긍정적인 영향을 미치나, 지각된 이용용이성과 지각된 안전성은 영향을 미치지 않았다. 가정에서 쉽게 이용할 수 있다는 것만으로는 적극적인 이용 행동을 기대할 수 없으며, 즐거움 및 실용적인 효익들의 제공 및 이를 위한 다양한 컨텐츠와 프로그램 개발등이 매우 중요하다는 것을 시사하고 있다.3-25%까지 감소하였다. 하지만 산간지역에서는 발육속도가 빨라지고 수량이 증가하거나 큰 변화가 없는 곳도 많아 온난화조건에서도 지역별 정밀기후 추정과 이에 근거한 최적품종의 선택, 이앙기 및 수확기 등 생육기간의 조절이 온난화 대응기술로서 유효할 것으로 기대된다.결과를 분석한 데이터를 차기 메일 발송에 꾸준히 적용함으로써 성공적인 이메일 마케팅 결과를 얻을 수 있을 것으로 기대된다.여 수평적인 의견도출과 각자 역할의 확대 및 변화를 시도할 수 있는 제작흐름이 되도록 고안된 제작구조이다.성을 환기시켜 객관적이고 비판적인 의식을 환기시키는 브레히트의 '소격화'의 효과가 소비자의 관심을 환기시켜 특정한 목적을 달성하려는 광고에 효율적으로 적용된 예 인 것이다. 재미, 기타 독특한 체험을 통해 소비자에게 유희라는 쾌락적 경험을 제공하고자 한다.고도로 통계적 유의차(p<0.001)가 있었다. 즐기는 음료로는 ${\ulcorner}$콜라${\lrcorner}$가 가장 많았으며(46.8%), 그 다음은 사이다, 주스 등의 순으로 나타났으나, 남 여 대학생간에는 유의성있는 차이는 없었다. 음식의 먹는 시기는 점심과 저녁사이의 ${\ulcorner}$간식${\lrcorner}$이 가장 많았으며(42.2%), 남 여 대학생간에는 유의한 차이는 없었다. 패스트푸드는 많은 사람들이 ${\ulcorner}$맛${\lrcorner}$이 좋기 때문에 이용하며(62.8%), 남 여 대학생간에는 통계적 유의성(p<0.05)이 인정되었다. 5. ${\u

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.1
• /
• pp.93-100
• /
• 2008

The parameters of lens such as focal length, focus, and aperture stop changes while shooting the scenes with zoom lens. Especially, zooming action dramatically changes the geometry of lens system that causes significant change of lens model. We investigated how the lens model changes while zooming in general shooting condition. Each parameters of lens model was estimated and checked whether they can be modeled well in the condition of auto-controlling focus, aperture and vibration reduction. In order to do this, calibration images were taken, modeled in different fecal length setting. And changing patterns of models were inspected to find out if there is some elements that have some particular pattern in changing with respect to focal length. The result showed us that although we didn't control the focus and aperture setting, there's specific changing patterns in radial and do-centering distortion. Especially, the strong linear correlation was found between coefficient of $r^2$ and focal length. It is expected that many parts of distortion can be eliminated without additional self calibration even if zoom operation is done when shooting the scenes if we know its fecal length and model of this coefficient.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.118-124
• /
• 2017

In this study, a numerical simulation was performed using commercial code Fluent(v.17.1). The underground Combined Cycle Power Plant (CCPP) was simplified to analyze the methane gas leakage with the crack size and position. In addition, extensive numerical simulations were carried out for different crack sizes from 10 mm to 20 mm. The crack position is the gas leakage, which is assumed to be near the pipe elbow and the gas turbine. A total of 4 cases were compared and analyzed. To analyze the gas leakage, the concept of the Lower Flammable Limit (LFL) was applied. The leakage distance was defined in the longitudinal direction, and the transverse direction was estimated and quantitatively analyzed. As a result, the leakage distance in the longitudinal direction varies by 52.3 % depending on the crack size at the same crack position. Moreover, the maximum difference was 34.8 % according to the crack position when the crack sizes are identical. As jet flow impacts on the obstacle and changes its direction, the recirculation flows are formed. These results are expected to provide useful data to optimize the location and number of gas detections in confined spaces, such as underground CCPP.

• Journal of Information Management
• /
• v.36 no.3
• /
• pp.183-193
• /
• 2005

Korean Academy of Medical Sciences began developing Korean Medical Citaton Index(KoMCI) database in 2002, and has announced the impact factors of Korean medical journals published since 2000. In July 2005, Korea Research Foundation also announced the KCI impact factor of journals covering all subject areas for the 2003 and 2004. We compared the impact factor(IF), impact factor excluding self-citation(ZIF), and self-citation impact factor(SIF) of KoMCI 2004 and KCI 2004 in order to disclose why there is such a great difference in the values of impact factors between two databases. Out of 72 medical journals in both database, 59 journals were compared after excluding the missing data in KCI. Mean IF of KoMCI 2004 was 0.2 and that of KCI 2004 was 0.03(p=0.0000). Mean ZIF of KoMCI was 0.06 and that of KCI was 0.01(p=0.000). Mean SIF of KoMCI was 0.139 and that of KCI was 0.02(p=0.0000). We presumed that the major difference in the impact factor values was originated from the fact that KCI does not control the authority of journal names cited in the references. We strongly recommend that it is necessary to control the authority especially if Korea Research Foundation wants to ensure the validity and reliability of KCI data in the evaluation of korean journals.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.3
• /
• pp.160-170
• /
• 2010

Steel Fiber Reinforced Concrete (SFRC) beams has greater shear strength than typical reinforced concrete beams due to the high tensile strength of steel fibers. In this research, an experiment has been conducted to investigate the shear behavior of SFRC beams, and especially, the portion of shear resistance by uncracked compressive concrete section has been measured. Based on the test results in this study and 87 test data collected from literature, the accuracy of the existing equations for the estimation of shear strength has been evaluated. The shear strength of SFRC beams increased as more steel fibers were mixed. However, it is considered that the most efficient amount of steel fiber for enhancement of shear strength would be between 1% and 2% in that the specimen with 0.5% of steel fibers were abruptly failed after inclined cracking, and that the specimen with 2.0% of steel fibers showed a relatively low efficiency in increasing shear strength. The portion of shear resistance by the uncracked compressive concrete section was measured to be greater than 21%, and the equation proposed by Oh et al. provided the best accuracy on the estimation of shear strength of SFRC beams among the approaches evaluated in this study.