• Journal of the Korean Association of Geographic Information Studies
• /
• v.21 no.1
• /
• pp.35-45
• /
• 2018

Image data collected by an airborne hyperspectral camera system have a great usability in coastal line mapping, detection of facilities composed of specific materials, detailed land use analysis, change monitoring and so forh in a complex coastal area because the system provides almost complete spectral and spatial information for each image pixel of tens to hundreds of spectral bands. A few approaches after classifying by a few approaches based on SAM(Spectral Angle Mapper) supervised classification were applied for extracting optimal land cover information from hyperspectral images acquired by CASI-1500 airborne hyperspectral camera on the object of a coastal area which includes both land and sea water areas. We applied three different approaches, that is to say firstly the classification approach of combined land and sea areas, secondly the reclassification approach after decompostion of land and sea areas from classification result of combined land and sea areas, and thirdly the land area-only classification approach using atmospheric correction images and compared classification results and accuracies. Land cover classification was conducted respectively by selecting not only four band images with the same wavelength range as IKONOS, QuickBird, KOMPSAT and GeoEye satelllite images but also eight band images with the same wavelength range as WorldView-2 from 48 band hyperspectral images and then compared with the classification result conducted with all of 48 band images. As a result, the reclassification approach after decompostion of land and sea areas from classification result of combined land and sea areas is more effective than classification approach of combined land and sea areas. It is showed the bigger the number of bands, the higher accuracy and reliability in the reclassification approach referred above. The results of higher spectral resolution showed asphalt or concrete roads was able to be classified more accurately.

• Korean Security Journal
• /
• no.21
• /
• pp.155-175
• /
• 2009

RFID that provide automatic identification by reading a tag attached to material through radio frequency without direct touch has some specification, such as rapid identification, long distance identification and penetration, so it is being used for distribution, transportation and safety by using the frequency of 125KHz, 134KHz, 13.56MHz, 433.92MHz, 900MHz, and 2.45GHz. Also it is one of main part of Ubiquitous that means connecting to net-work any time and any place they want. RFID is expected to be new growth industry worldwide, so Korean government think it as prospective field and promote research project and exhibition business program to linked with industry effectively. RFID could be used for access control of person and vehicle according to section and for personal certify with password. RFID can provide more confident security than magnetic card, so it could be used to prevent forgery of register card, passport and the others. Active RFID could be used for protecting operation service using it's long distance date transmission by application with positioning system. And RFID's identification and tracking function can provide effective visitor management through visitor's register, personal identification, position check and can control visitor's movement in the secure area without their approval. Also RFID can make possible of the efficient management and prevention of loss of carrying equipments and others. RFID could be applied to copying machine to manager and control it's user, copying quantity and It could provide some function such as observation of copy content, access control of user. RFID tag adhered to small storage device prevent carrying out of item using the position tracking function and control carrying-in and carrying-out of material efficiently. magnetic card and smart card have been doing good job in identification and control of person, but RFID can do above functions. RFID is very useful device but we should consider the prevention of privacy during its application.

• Journal of Food Hygiene and Safety
• /
• v.30 no.2
• /
• pp.143-149
• /
• 2015

This study was conducted to simultaneous analysis methods for water soluble vitamins B group (vitamin $B_1$, vitamin $B_2$, nicotinic acid, nicotinamide, vitamin $B_6$) which is used as health functional foods etc. Analytical methods of water-soluble vitamins B group by HPLC were established through instrumental analytical conditions, and the examination of data such as domestic and foreign reliable methods, and papers of journal. HPLC method analyzing water soluble vitamins B group was established using Capcell Pak C18 UG 120 column in 270 nm through test of columns. The validation has been performed on the method to determine linearity, accuracy, limits of quantification (LOQ) and repeatability for water soluble vitamins B group. An excellent linearity ($r^2=0.999$) was observed for vitamin $B_1$, vitamin $B_2$, nicotinic acid, nicotinamide, vitamin $B_6$ in the concentration range ($0.1{\sim}2{\mu}g/mL$). Observed recovery of vitamin $B_1$ was found to be between 100 and 103%, vitamin $B^2$ was found to be between 104 and 112%, nicotinic acid was found to be between 82 and 85%, nicotinamide was found to be between 121 and 124% and vitamin $B_6$ was found to be between 95 and 104%. LOQ of vitamin $B_1$ was found to be $0.04{\mu}g/mL$, vitamin $B_2$ was found to be $0.05{\mu}g/mL$, nicotinic acid was found to be $0.15{\mu}g/mL$, nicotinamide was found to be $0.08{\mu}g/mL$ and vitamin $B_6$ was found to be $0.63{\mu}g/mL$. Repeatability precision for vitamin $B_1$ was found to be 0.4%, vitamin $B_2$ was found to be 0.4%, nicotinic acid was found to be 0.5%, nicotinamide was found to be 0.7% and vitamin $B_6$ was found to be 0.4% relative standard deviation (RSD). Also, verify the accuracy of the simultaneous analysis methods, we monitored the labeled contents of the health functional foods and children's preferred foods.

• Korean Journal of Environment and Ecology
• /
• v.32 no.2
• /
• pp.244-251
• /
• 2018

The present study aimed to identify the influence of climate change on mating songs of Cicadidae in a phenological perspective. The research sites were located in the central part of the Korean peninsula in which phenological observations by the Meteorological Office are made. The material provided by the Meteorological Office was used for long term phenological analysis. The findings demonstrated, First, the phenological monitoring of cicada is an effective index to detect ecological changes due to climate change, thus indicating the importance of long term phenological investigations for future studies. Second, the analysis on the phenological changes of H. fuscata presented a trend in which the first songs were made at increasingly earlier and later dates, respectively. The phenological data on H. fuscata and average temperatures exhibited a significant negative correlation between the initial mating song period and the average temperatures of June. Furthermore, there was also a significant negative correlation for precipitation in October with the end time and total duration of H. fuscata song. Third, in the regression analysis of the start of H. fuscata song and meteorological factors in Seoul, increasing average air temperature in spring (March to June), which includes June, was associated with an earlier start time of H. fuscata song, with calling starting approximately 3.0-4.5 days earlier per $1^{\circ}C$ increase. Fourth, in the regression analysis of the end of H. fuscata song and meteorological factors in Seoul, increased mean precipitation in October was associated with an early end time and an overall reduction in the length of the song period. The end time of song decreased by approximately 0.78 days per 1mm increase in precipitation, and the total length of the song period decreased by 0.8 days/1mm. This research is important, as it is the initial research to identify the phenological changes in H. fuscata due to climate change.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.6
• /
• pp.421-428
• /
• 2014

For the analysis of water supply network, demand-driven and pressure-driven analysis methods have been proposed. Of the two methods, demand-driven analysis (DDA) can only be used in a normal operation condition to evaluate hydraulic status of a pipe network. Under abnormal conditions, i.e., unexpected pipe destruction, or abnormal low pressure conditions, pressure-driven analysis (PDA) method should be used to estimate the suppliable flowrate at each node in a network. In order to carry out the pressure-driven analysis, head-outflow relationship (HOR), which estimates flowrate at a certain pressure at each node, should be first determined. Most previous studies empirically suggested that each node possesses its own characteristic head-outflow relationship, which, therefore, requires verification by using actual field data for proper application in PDA modeling. In this study, a model pipe network was constructed, and various operation scenarios of normal and abnormal conditions, which cannot be realized in real pipe networks, were established. Using the model network, data on pressure and flowrate at each node were obtained at each operation condition. Using the data obtained, previously proposed HOR equations were evaluated. In addition, head-outflow relationship at each node was analyzed especially under multiple pipe destruction events. By analyzing the experimental data obtained from the model network, it was found that flowrate reduction corresponding to a certain pressure drop (by pipe destruction at one or multiple points on the network) followed intrinsic head-outflow relationship of each node. By comparing the experimentally obtained head-outflow relationship with various HOR equations proposed by previous studies, the one proposed by Wagner et al. showed the best agreement with the exponential parameter, m of 3.0.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.1
• /
• pp.73-80
• /
• 2007

This study was carried out to separate the heavy toxic metals in eco-building materials by low-temperature pyrolysis, especially arsenic (As) compounds in CCA wood preservative as a solid in char. The pyrolysis was carried out to heat the CCA-treated Hemlock at $280^{\circ}C$, $300^{\circ}C$, $320^{\circ}C$, and $340^{\circ}C$ for 60 mins. Laboratory scale pyrolyzer composed of [preheater$\rightarrow$pyrolyzer$\rightarrow$1st water scrubber$\rightarrow$2nd bubbling flask with 1% $HNO_3$ solution$\rightarrow$vent], and was operated to absorb the volatile metal compound particulates at the primary water scrubber and the secondary nitric acid bubbling flask with cooling condenser of $4^{\circ}C$ under nitrogen stream of 20 mL/min flow rate. And the contents of copper, chromium and arsenic compounds in its pyrolysis such as carbonized CCA treated wood, 1st washing and 2nd washing liquors as well as its raw materials, were determined using ICP-AES. The results are as follows : 1. The yield of char in low-temperature pyrolysis reached about 50 percentage similar to the result of common pyrolytic process. 2. The higher the pyrolytic temperature was, the more the volatiles of CCA, and in particular, the arsenic compounds were to be further more volatile above $320^{\circ}C$, even though the more repetitive and sequential monitorings were necessary. 3. More than 85 percentage of CCA in CCA-treated wood was left in char in such low-temperature pyrolytic condition at $300^{\circ}C$. 4. Washing system for absorption of volatile CCA in this experiment required much more contacting time between volatile gases and water to prevent the loss of CCA compounds, especially the loss of arsenic compound. 5. Therefore, more complete recovery of CCA components in CCA-treated wood required the lower temperature than $320^{\circ}C$, and the longer contacting time of volatile gases and water needed the special washing and recovery system to separate the toxic and volatile arsenic compounds in vent gases.

• 재활복지
• /
• v.22 no.2
• /
• pp.1-30
• /
• 2018

This paper attempts to explore the place of human and disability rights from the perspective of Social Welfare within the context of the UN Disability Rights Convention of 2006. The overall discussion is focused especially upon the situations of human and disability rights in the Democratic People's Republic of Korea (North Korea) as it is being challenged to drastically address the issues of human rights in general, and disability rights in particular. The UN Disability Rights Convention challenges every ratified State party to commence legal reforms, legal harmonization, and policy and program developments to implement the Convention. Both North and South Korea are not exceptions to this. Even without drawing upon the UN's the Commission of Inquiry on Human Rights in the Democratic People's Republic of Korea, the dire situation of human rights in North Korea is well documented. However, this paper does not assume South Korea's human rights are any way superior to that of North Korea. This paper spells out areas for further action common to two Koreas and to any other nations for that matter. Apart from the general discussion on disability rights, the distinctive contribution of this paper lies in the fact that it has endeavored to draw upon any latest information and data on North Korea. It relied on various sources from UN and also from North Korea itself. One can note that North Korean disability authorities are making strenuous efforts to improve human rights of persons with disabilities in their desires to seek assistance from outside. It also shows an enormous need for international cooperation in seeking financial and material supports. This paper notes the latest political development between North and South Korea in taking "phased" steps for peace and stability as a positive sign for North and South Koreans' DPOs collaboration under the banner of International Cooperation of the article 32 of the UN Disability Rights Convention. More critically, this paper points to the further need to improve the overall data bases to ensure balanced legal reforms, policy developments and sharpen the areas of international collaboration.

• Journal of Korean Society of Forest Science
• /
• v.109 no.4
• /
• pp.371-381
• /
• 2020

The Ministry of Environment (ME) is planning to adopt in 2020 the IUCN regional Red List for "Guidelines for listing and delisting rare & endangered species and management of endangered Species System". The ME designated 377 species of vascular plants on the regional Red List. In a previous study it had been suggested that 103 species from this list are candidates for the regional Red List. With respect to a possible Red List, we assessed 59 species (after excluding 34 additional NA species and ten endemic species). These assessments indicated that 16 species are at the "threatened" level. Of those, one species is Critically Endangered, ten are Endangered, and five are Vulnerable. A further four species are classified as Near Threatened, 30 as Of Least Concern, and nine as Data Deficient. We found that most of the assessments proposed by the Ministry of Environment were not supported by scientific data, including quantitative geographic data (over 70%) in Criteria B. In order to determine the endangered species belonging to the orchid family, it is necessary to obtain records of illegal activities or data on overcollection. The current problem with the Ministry of Environment Red List has been the lack of management of scientific data on species showing a trend in decreasing population in the mid- to long-term; thus, there is a lack of critical resources for policy-makers. The ME legally designated categories and assessment, and the lack of expertise in failing to comply with the legal law by itself. The key to presenting an accurate overview of the state of Korean flora is to fill the information gaps with respect to significant geographical and taxonomical biases in the quality and quantity of data. By regularly updating the qualified data, we will be able to track the changes in the conservation status of the flora and inform the necessary conservation policies.

• Journal of Bio-Environment Control
• /
• v.31 no.4
• /
• pp.409-415
• /
• 2022

Plant growth and development are also affected by root-zone environment. Therefore, it is important to consider the variables of the root-zone environment when establishing an irrigation strategy. The purpose of this study is to analyze the relationship between the volumetric moisture content (VWC), Bulk EC (ECb), and Pore EC (ECp) used by plant roots using FDR sensors in two types of rockwool media with different water transmission characteristics, using the method above this was used to establish a method for collecting and correcting available root-zone environmental data. For the experiment, two types of rockwool medium (RW1, RW2) with different physical characteristics were used. The moisture content (MC) and ECb were measured using an FDR sensor, ECp was measured after extracting the residual nutrient solution from the medium using a disposable syringe in the center of the medium at a volumetric moisture content (VWC) of 10-100%. Then, ECb and ECp are measured by supplying nutrient solution having different concentration (distilled water, 0.5-5.0) to two types of media (RW1, RW2) in each volume water content range (0 to 100%). The relationship between ECb and ECp in RW1 and RW2 media is best suited for cubic polynomial. The relationship between ECb and ECp according to volume moisture content (VWC) range showed a large error rate in the low volume moisture content (VWC) range of 10-60%. The correlation between the sensor measured value (ECb) and the ECp used by plant roots according to the volumetric water content (VWC) range was the most suitable for the Paraboloid equation in both media (RW1, RW2). The coefficient of determination the calibration equation for RW1 and RW2 media were 0.936, 0.947, respectively.

• Journal of Wetlands Research
• /
• v.24 no.3
• /
• pp.204-212
• /
• 2022

The LID technique began to be applied in Korea after 2009, and LID facilities are installed and operated for rainwater management in business districts such as the Ministry of Environment, the Ministry of Land, Infrastructure and Transport, and LH Corporation, public institutions, commercial land, housing, parks, and schools. However, looking at domestic cases, the application cases and operation periods are insufficient compared to those outside the country, so appropriate design standards and measures for operation and maintenance are insufficient. In particular, LID facilities constructed using LID techniques need to maintain the environment inside LID facilities because hydrological and environmental effects are expressed by material circulation and energy flow. The LID facility is designed with the treatment capacity planned for the water circulation target, and the proper maintenance, vegetation, and soil conditions are periodically identified, and the efficiency is maintained as much as possible. In other words, the soil created in LID is a very important design element because LID facilities are expected to have effects such as water pollution reduction, flood reduction, water resource acquisition, and temperature reduction while increasing water storage and penetration capacity through water circulation construction. In order to maintain and manage the functions of LID facilities accurately, the current state of the facilities and the cycle of replacement and maintenance should be accurately known through various quantitative data such as soil contamination, snow removal effects, and vegetation criteria. This study was conducted to investigate the current status of LID facilities installed in Korea from 2009 to 2020, and analyze soil changes through the continuity and current status of LID facilities applied over the past 10 years after collecting soil samples from the soil layer. Through analysis of Saturn, organic matter, hardness, water contents, pH, electrical conductivity, and salt, some vegetation-type LID facilities more than 5 to 7 years after construction showed results corresponding to the lower grade of landscape design. Facilities below the lower level can be recognized as a point of time when maintenance is necessary in a state that may cause problems in soil permeability and vegetation growth. Accordingly, it was found that LID facilities should be managed through soil replacement and replacement.