• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.49 no.4
• /
• pp.82-88
• /
• 2012

A VANET (Vehicular Ad Hoc Network), a subclass of MANET (Mobile Ad Hoc Network), is an ad hoc network using wireless communication between vehicles without fixed infrastructure such as base station. VANET suffers a frequent link breakage and network topology change because of the rapid movement of vehicles and the density change of vehicles. From these characteristics of VANET, geographical routing protocols such as GPSR (Greedy Perimeter Stateless Routing) using only the information of neighbor nodes are more suitable rather than AODV and DSR that are used in existing MANETs. However, GPSR may have a transmission delay and packet loss by frequent link disconnection and continual local maxima under the low vehicle density conditions. Therefore, in this paper, we propose a DTVR (Delay Tolerant Vehicular Routing) algorithm that perform a DTN-based routing scheme if there is no 2-hop neighbor nodes for efficient routing under the low vehicle densities in VANETs. Simulation results using ns-2 reveal that the proposed DTVR protocol performs much better performance than the existing routing protocols.

• Journal of Advanced Navigation Technology
• /
• v.23 no.6
• /
• pp.548-553
• /
• 2019

Along with advanced vehicle to vehicle (V2V) communication technologies, platooning is regarded as one of the most promising form of autonomous driving solutions in order to increase road capacity. In this paper, we propose a novel V2V transmission scheme for safety message dissemination in platooning. The proposed scheme enhances the efficiency of channel access and multi-vehicle orthogonal frequency division multiple access (OFDMA) transmission by taking advantage of triggered uplink access technique and null data packet feedback report protocol introduced in the sixth generation WLAN standard, IEEE 802.11ax. The simulation results prove that the proposed scheme outperforms the conventional IEEE 802.11 transmission scheme throughout all measured vehicle density range.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.11
• /
• pp.1043-1051
• /
• 2007

The digital sun sensor calculates the incident sunlight angle using the sunlight image registered on a CMOS image sensor. In order to accomplish this, an exact center of the sunlight image has to be determined. Therefore, an accurate estimate of the centroid is the most important factor in digital sun sensor development. The most general method for determining the centroid is the thresholding method, and this method is also the simplest and easy to implement. Another centering algorithm often used is the image filtering method that utilizes image processing. The sun sensor accuracy using these methods, however, is quite susceptible to noise in the detected sunlight intensity. This is especially true in the thresholding method where the accuracy changes according to the threshold level. In this paper, a template method that uses the sunlight image model to determine the centroid of the sunlight image is suggested, and the performance has been compared and analyzed. The template method suggested, unlike the thresholding and image filtering method, has comparatively higher accuracy. In addition, it has the advantage of having consistent level of accuracy regardless of the noise level, which results in a higher reliability.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.3
• /
• pp.299-304
• /
• 2010

Depending on the progress of the surveying and information processing technology, the rapidly developing field of spatial information and the 3D real world spatial information for a variety of content on the computer was able to easily access. In this research, to study on the spot or to use aerial photographs to measure trees of the acquired data, calculate the trees height, forest area and capacity, determine the distribution of the density of acquired points in the forest and analyze accurate and objective information was acquired. The United States, Canada and so on through the capacity of trees biomass, forest resource analysis, time series monitoring, wildfire behavior modeling and applied research and has been declared. During worldwide is increasing interest in forest resources. In nationally, extensive research and analysis of the forest consists of the correct management and protection of forest resources to be effective.

• Korean Journal of Construction Engineering and Management
• /
• v.6 no.1 s.23
• /
• pp.140-150
• /
• 2005

Recently, quality inspection and defect management have been considered as one of the major issues for increasing customer satisfaction and corporate image in domestic construction industry. However, the quality inspection and defect management have not been performed systematically because of insufficient field managers, the excessive amount of documents, complicated work process and difficulty in communicating construction information. Therefore, the field manager could not perform the quality inspection and defect management work in time as well as the reliability of recorded quality and defect data was decreased. The primary objective of this study is to propose a quality inspection and defect management system using information technology which enables field managers to efficiently gather the information of defection in apartment housing. It is anticipated that the effective use of the proposed system would be able to imp개ve communication among the related participants and systematically accumulate data that might be used in similar construction projects.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.2C
• /
• pp.145-152
• /
• 2009

Ultra-wideband communication systems for impulse radio have merits that are possible for either high resolution ranging system or radio determination. Conventionally, in order to accomplish these functions, the rapid analog to digital convertor (ADC) is necessary to apply radio determination system operating in time domain. However, considering that low rate - wireless personal area network (LR-WPAN) aims to low-cost hardware implementation, the expensive ADC converting GHz sampling per second is not appropriate. So, this paper introduces the high resolution ranging system operating in frequency domain with using low sampling rate ADC, and a new non-coherent ranging scheme utilizing analog Frequency Modulation (FM) mode for the frequency domain transformation. To verify the superiority of the proposed ranging algorithm working in frequency domain, the suggested IEEE 802.15.4a TG channel model is used to exploit affirmative features of the proposed algorithm with conducting the simulation results.

• Journal of the Economic Geographical Society of Korea
• /
• v.15 no.1
• /
• pp.116-130
• /
• 2012

This study focuses on analyzing the design industry in creative industry in the context of upbringing growth engine of regional development policy and strategy. This research probe the spatial characteristics and inter-organizational network structure change from 2000 to 2010 using social network analysis(SNA) in terms of structural, spatial and temporal aspects. first, with the statistical data of design industry, this research evaluate spatial distribution and agggglomeration compared with 16 cities and 7metropolitan scales in Korea. Next, the group of density in the knowledge network of design industry explained with the spatial characteristics and inter-organizational network evolution in time series. After considering the government policy and strategy providing as a result of establishing regional innovation center strengthen cooperation among industry-university-research center.

• Journal of Korean Society of Disaster and Security
• /
• v.13 no.3
• /
• pp.15-28
• /
• 2020

Hydrological data is very important in understanding the hydrological process and identifying its characteristics to protect human life and property from natural disasters. In particular, hydrological analysis are often performed assuming that hydrological data are stationary. However, recently climate change has raised the issue of climate stationary, and it is necessary to analyze the nonstationary of the climate. In this study, a method to analyze the stationarity of hydrological data was examined using the annual precipitation of 37 meteorological stations with long - term record data. Therefore, in this study, the stationary was determined by analyzing the persistence, trend, and stability using annual precipitation. Overall results showed that a trend was observed in 4 out of 37 stations, stable was investigated at 15 stations, and persistence was shown at 4 stations. In the stationary analysis using the annual precipitation data, 25 stations (67% of 37 stations) were nonstationary.

• Journal of the Korean Regional Science Association
• /
• v.32 no.3
• /
• pp.45-62
• /
• 2016

The main purpose of this study is to investigate whether the gap of fiscal self-sufficiency rates of 16 provincial governments in Korea has been narrowed and to suggest some remedies based on the empirical results. The panel data set from 1998 to 2013 is used and pooled OLS and system GMM regression techniques are employed. The fiscal self-sufficiency rates show downward trend and ${\beta}-convergence$ exists in absolute and conditional convergence analysis. The speed of conditional convergence anlysis is proved to be faster than that of absolute analysis. Both metropolitan cities and prefectures show convergence of fiscal self-sufficiency rates. We have found out that in the case of metropolitan cities, the proportion of workers in the tertiary industry has positive effect on fiscal self-sufficiency rates and in the case of prefectures number of cars per capita has positive effect. And in both cases increase in old population has negative effect.

• Journal of the Korean Data and Information Science Society
• /
• v.24 no.1
• /
• pp.53-62
• /
• 2013

Currently we have 11 climatological stations registered in World Meteorological Organization. Geographically, these stations are unevenly distributed in Korea and are mainly located on seaside. Therefore station's density analysis should be performed to produce the high-quality climatological data. Using the correlation integral method, the density of climatological stations can be measured by the estimation of fractal dimension. In this study, new climatological stations having the higher fractal dimension were selected. Sequential or simultaneous selection method were carried out until 3 new stations were selected based on the fractal dimension.