• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.2 no.1
• /
• pp.87-91
• /
• 1969

Experiments on the rearing of larvae of the prawn, Penaeus japonicus Bate, have been con-ducted by using a large tank A ($3.4\times1.9\times1.0m$) and two small tanks B and C ($1.45\times0.85\times1.0$). 1) Between spawning and the first zoeal stages, no significant elapsed time difference was noticed among the rearing tanks. At about $23^{\circ}C$ of water temperature nearly all of the larvae in the tanks metamorphosed into the first zoeal stage in about 36-48 hours. However the period of time which elapsed between the spawning and post-larval stage showed some differences bet-ween the tanks, i.e., 19-20 days in tank A and 15-17 days in tanks B and C, respectively 2) No difference in body length of the larvae has been observed among the three tanks. 3) The post-larva passed through several molts, one every four or five days, before reaching the young prawn about 36-40 days after spawning. 4) Throughout the zoeal stages the highest mortality was found at the time of molting between the first and second zoeal stages showing about $51.39\%$ in tank A, $50.70\%\;and\;31.91\%$ in tanks B and C, respectively. 5) Total mortality during the duration of the larval stages was around $75\%$ in all the rearing tanks.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.6
• /
• pp.4019-4023
• /
• 2014

This study examined the effectiveness of ultrasound on enhancing the dewaterability and volume reduction of bio solids from a waste treatment plant. The test specimen was obtained from a storage tank immediately before the dewatering process at a local treatment plant. The test conditions included the energy levels of ultrasonic waves and treatment time. The tests were undertaken using three types of different treatment processors (7 liter, 1 ton, 7 ton container). The capillary suction time (CST) and the viscosity of sludge, which is one of the influencing factors for dewaterbility, were obtained under various test conditions. The results showed that ultrasound increases the CST of the raw specimens, whereas a significant reduction (20 % of the maximum value) of CST occurred in the sample with ultrasound and flocculent. The decrease in viscosity reached 40 % of the maximum value. A centrifugal test was performed to examine the characteristics of the sludge settlement. The settling rate and time required to reach the final values were both enhanced by the ultrasonic energy. An ultrasonic treatment is potentially useful tool for reducing the amount of released sludge. To examine the possible use of field application, the real scale sonic processor was designed and operated. The results were similar (50 % of the maximum value) to those of laboratory experiments.

• Journal of Korea Multimedia Society
• /
• v.10 no.11
• /
• pp.1483-1495
• /
• 2007

Thanks to IEEE 802.11 technique, accessing Internet through a wireless LAN(Local Area Network) is possible in the most of the places including university campuses, shopping malls, offices, hospitals, stations, and so on. Most of the APs(access points) for wireless LAN are supporting 2.4 GHz band 802.11b and 802.11g protocols. This paper is introducing a C# library function which can be used to read RSSIs(Received Signal Strength Indicator) from APs. An LBS(Location Based Service) estimates the current location of the user and provides useful user's location-based services such as navigation, points of interest, and so on. Therefore, indoor, LBS is very desirable. However, an indoor LBS cannot be realized unless indoor position ing is possible. For indoor positioning, techniques of using infrared, ultrasound, signal strength of UDP packet have been proposed. One of the disadvantages of these techniques is that they require special equipments dedicated for positioning. On the other hand, wireless LAN-based indoor positioning does not require any special equipments and more economical. A wireless LAN-based positioning cannot be realized without reading RSSIs from APs. Therefore, our C# library function will be widely used in the field of indoor positioning. In addition to providing a C# library function of reading RSSI, this paper introduces implementation of indoor positioning modules making use of the library function. The methods used in the implementation are K-NN(K Nearest Neighbors), Bayesian and trilateration. K-NN and Bayesian are kind of fingerprinting method. A fingerprint method consists of off-line phase and realtime phase. The process time of realtime phase must be fast. This paper proposes a decision tree method in order to improve the process time of realtime phase. Experimental results of comparing performances of these methods are also discussed.

• Journal of the Korea Institute of Building Construction
• /
• v.16 no.6
• /
• pp.505-512
• /
• 2016

Even though high performance concrete was developed according to the trend of bigger and higher of reinforced concrete building, the rheological evaluations such as viscosity, yield stress are not enough to use as input data to accomplish the numerical analysis for the construction design. So there are many problems in the harden concrete such as poor compaction, rock pocket and crack, etc. in the field. In this study, consistency curves were measured by the viscometer as hydration reaction time passed. At the same time the slump flow test and Vicat setting test were carried out for comparing with the results of rheological properties. The fluidity of the W/B 30% decreased as the increase of replacement ratio of blast furnace slag. But in case of W/B 40%, the replacement ration did not significantly influenced to the slump flow value with the passage of hydration time. By the replacement of blast furnace slag to cement, initial setting was delayed and the time gap between initial and final setting became shorten. Through the regression analysis using Bingham model, there are a sudden changes of viscosity and yield stress around initial setting in case of low W/B 30%. The increase of workability by the change of free water in cement paste was offset by the coating effect of impermeable layer in case of W/B 40%.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.11 no.2 s.54
• /
• pp.81-94
• /
• 2007

In most experimental researches on the liquefaction phenomenon, an earthquake as a random vibration has been regraded as a sinusoidal wave or a triangular wave with an equivalent amplitude. Together with the development in the part of signal control and data acquisition, dynamic experimental equipments in the soil dynamics have also developed rapidly and further more, several real earthquakes have been simulated in the large model test such as shaking table tests and centrifuge tests. In Korea, several elementary laboratory tests to simulate the real earthquake load were performed. From these test results, it was reported that the sinusoidal wave cannot reliably reflect the soil dynamic behavior under the real earthquake motion. In this study, 4 types of dynamic motions such as the sinusoidal wave, the triangular wave, the incremental triangular wave and several real earthquake motions which were classified with shock-type and vibration-type were loaded to find something new to explain the change of the excess pore water pressure under the real earthquake load. Through the detailed investigation and comparison on all test results, it is found that the dynamic flow is generated by the soil plastic deformation and the velocity head of dynamic flow is changed the pressure head in the un-drained condition. It can be concluded that the change of the excess pore water pressure is related to the pressure head of dynamic flow. Lastly, a new hypothesis to explain such a liquefaction initiation phenomenon under the real earthquake load is also proposed and verified.

• Parasites, Hosts and Diseases
• /
• v.29 no.2
• /
• pp.139-148
• /
• 1991

Cryptosporidium, a coccidian protozoa, commonly causes a self-limiting diarrheal illness in humans and animals. Fecal samples from various animals in Chonbuk district were observed using Sheather's aoatation technique, Kinyoun's modified acid-fast staining, and osmic acid pre-fixed Giemsa staining. The oocysts were detected in 74 cages(29.6%) out of 250 cages of mature mice, 26 (13.3%) out of 195 mature house rats, 75 (15.0%) out of 4-week-old 500 fowls, 98(19.9%) out of 6 to 8-month-old 500 pigs, and 111(22,2%) out of 2 to 5-year-old 500 dairy cattle, respectively. The degree of prevalence was slight in general, but actual prevalence was higher than infection rate because the detection rates were higher in repeated-preparation examinations in comparison to the first examination. Meanwhile, large and small types of oocysts were detected from mice, house rats, pigs, and cattle, and midium type from fowls.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.6
• /
• pp.999-1010
• /
• 2016

High-strength strands have been increasingly applied to recent actual structures in Korea. Structural effect of the increased spacing of sheaths was investigated in this study when the usual 1,860 MPa strands of an LNG storage tank are replaced with 2,400 MPa high-strength strands. First, finite element models of a cylindrical wall of an LNG tank were established and prestressing effect of the circumferential and vertical tendons was considered as equivalent loads. As a result of varying the tendon spacing and prestressing force with the total prestressing effect kept the same, the stress distribution required in design was obtained with the high-strength strands. Also, a full-scale specimen that corresponds to a part of an LNG tank wall was fabricated with 31 high-strength strands with 15.2 mm diameter inserted in each of two sheaths. It was observed that such a high level of prestressing force can be properly transferred to concrete. Moreover, an LNG tank with the world's largest 270,000 kl capacity was modeled and the prestressing effect of high-strength strands was compared with that of normal strands. The watertightness specifications such as residual compressive stress and residual compression zone were also ensured in case of leakage accident. The results of this study can be effectively used when the 2,400 MPa high-strength strands are applied to actual LNG tanks.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.10
• /
• pp.1611-1618
• /
• 2005

The microbiological examinations were conducted for the hygienic evaluation on three Korean restaurants during summer season in Busan, Korea. Total one hundred and sixty swabbed samples using sponge were collected from the surface of facilities and utensils at restaurants and total and coliform counts were measured. Also thirty- six air samples were collected at inside of three restaurants for measuring total, coliform, Staphy-lococcus and mold and yeast counts. All collected samples kept in an ice-packed box were transported to the laboratory and analyzed. The results demonstrated that most swabbed samples were highly contaminated with microorganisms and coliforms. The degree of contamination depended on the sampling sites. Averages of total counts of surface swab samples were ranged from not detectable to 2.14$\times\10^{9}$/200 $cm^{2}$, while those of coliforms from not detectable to 8.34$\times\10^{7}$/200 $cm^{2}$/200 $cm^{2}$. Microorganisms also detected from most agar strips of air samples for total, coliform, Staphylococcus and mold and yeast counts. The severely contaminated sites were floor, trench, water bottle, plastic drainer, rubber gloves, shelves, and unsealed wet towel. Those sites should be focused and controlled according to control Points of sanitation standard operating Procedures. Also, periodic microbiological examination in addition to visual examination should be applied on those highly contaminated sites for reducing risk of foodborne disease outbreak at restaurants

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1033-1037
• /
• 2007

하천의 수위를 유지하거나 농업용수를 취수할 목적으로 현재 국내에 약 18,000개 정도의 크고 작은 보가설치되어 있다. 이러한 보 중에는 극히 일부에 어도와 같은 생태통로가 인위적으로 설치되어 있지만 전체적으로는 매우 미미한 수준이다. 더욱이 도시 인구 집중황 따른 도심부의 확대로 인한 농경지의 도시화, 경작 방식의 변화에 의한 논농사 위주에서 비닐하우스 단지로의 변화와 같은 토지이용의 변화, 대형 저수지의 축조／양수장 설치 등에 따른 취수 시설물의 통합, 시설의 노후화 등으로 매년 50-150개 정도의보가 폐기되고 있다. 그러나 이렇게 폐기되는 보는 하천에 그대로 방치되어 하천생태통로의 단절, 수질악화, 수변 서식처악화 등의 문제를 지속적으로 야기시키고 있다. 연구지역은 경기도 고양시 곡릉천 곡릉2보로 선정하여 보 철거전 과 보 철거 후의 모니터링을 통한 수질분석을 시행하였다. 곡릉2보는 과거 취수용 보로 이용되었으나 주변지역 토지이용 변화로 용도를 상실한 보이다. 보 철거 전에는 보로 인한 보 상류 지역에 퇴적물이 쌓이면서 정체구역이 생기고 부유물질이 많아지면서 수질 악화를 초래하는 것으로 나타났다. 그러나 보 철거 후에는 화학적으로 상류 하류지점에서 SS 및 BOD의 농도가 감소하여 전체적으로 수질향상에 기여한 것으로 나타났다. 보 철거에 따른 수질분석에 대한 연구는 아직 진행 단계에 머물러 있으며, 그 주변에 대한 상세한 이론은 아직 미미하다. 따라서 현재 국내외 보의 현황 및 보 철거 기술을 조사하고, 우리나라의 조건이 다른 보를 선정하여 하천의 보가 수질에 미치는 영향을 정량적으로 분석함으로써, 향후 우리나라의 보 관리방안의 방향을 제시하는데 도움이 되고자 한다.를 제시하고 있다. 미국의 경우는 이러한 가이드라인을 실제로 현장에 적용하고 있으며 조성효과가 정성적으로 검증되었고 정량적인 관계 도출을 위한 연구가 지속적으로 진행되고 있다. 국내의 경우 수질개선 및 생태서식처 조성, 하천환경을 개선하기 위한 관련 정책이 꾸준히 제시되고 있다. 한 예로 정부에서는 수변구역을 지정 고시하여 상수원으로 유입되는 비점오염물질을 저감하고 생태서식처를 조성함으로써 양질의 상수원과 건전한 생태계를 확보하기 위한 제도를 시행 중이다. 수변 구역의 범위는 한강수변구역의 경우 약 $500{\sim}1,000m$로 설정되어 있으나 아직까지는 관리적 성격이 강하며, 향후에는 구체적인 조성방안이 요구된다. 본 연구에서는 한강 수변구역 내에 미국의 가이드라인에서 제시하는 수변완충지대의 물리적 조건과 국내 지역 토착식생을 적용하여 시험완충지대를 조성하였고, 실험조건 하에서 그 효과를 정량적으로 분석 검증한 결과와 외국사례를 분석하여 국내여건에 맞는 수변완충지대 조성 가이드라인(안)을 제시하였다.EX>$\ulcorner$세종실록$\lrcorner$(世宗實錄) $\ulcorner$지리지$\lrcorner$(地理志)와의 비교를 해보면 상 중 하품의 통합 9개소가 삭제되어 있고, $\ulcorner$동국여지승람$\lrcorner$(東國與地勝覽) 에서는 자기소와 도기소의 위치가 완전히 삭제되어 있다. 이러한 현상은 첫째, 15세기 중엽 경제적 태평과 함께 백자의 수요 생산이 증가하자 군신의 변별(辨別)과 사치를 이유로 강력하게 규제하여 백자의 확대와 발전에 걸

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.5
• /
• pp.461-466
• /
• 2013

This paper examines the characteristics of butt welding joint shrinkage for shipbuilding and marine structures main plate. The shrinkage strain of butt welding joint which is caused by the process of heat input and cooling, results in the difference between dimensions of the actual parent metal and the dimensions of design. This, in turn, leads to poor quality in the production of ship blocks and reworking through period of correction brings about impediment on improvement of productivity. Through experiments on butt welding joint's shrinkage strain on large structures main plate, the deformation of welding residual stress in the form of I, Y, V was obtained. In addition, the results of experiments indicate that there is limited range of shrinkage in the range of 1 ~ 2 mm in 11t ~ 21.5t thickness and the effect of heat transfer of weld appears to be limited within 1000mm based on one side of seam line so there was limited impact of weight of parent metal on the shrinkage. Finally, it has been learned that Shrinkage margin needs to be applied differently based on groove phenomenon in the design phase in order to minimize shrinkage.