• Journal of Aerospace System Engineering
• /
• v.14 no.1
• /
• pp.62-67
• /
• 2020

The European Aviation Safety Agency (EASA) legislates the CS-E (Certification Specification-Engine) for type certification of aircraft engines. According to the CS-E, engine manufacturers (type certificate holders) the need to show compliance of continued airworthiness of an engine during the overhaul, and the Accelerated Mission Test (AMT) is usually accepted as means of compliance. As a part of the Korean Civil Helicopter program, the engine has been developed with foreign manufacturers to achieve the EASA engine type certificate. In this study, the AMT procedure is planned for the engine to be certified by the EASA, and AMT cycles are also established to meet airworthiness requirements of the CS-E in consideration of the engine design and operation characteristics.

• Journal of Korean Society for Geospatial Information Science
• /
• v.10 no.3 s.21
• /
• pp.17-27
• /
• 2002

It is desirable to use a photogrammetric scanner to minimize the errors from the scanning procedure in case of building aerial photo image DB. The photogrammetric scanner, however, is highly expensive to have only limited number of scanners available, therefore the general-purpose scanners have been considered as an alternative. This study has mainly been focused to see the possibility of the general-purpose scanner to be used for scanning aerial photographs. For that, the analysis of the image coordinates were made as well as the accuracy evaluation of each phase. In addition to that, as the application of the orthophoto images has been increased, the magnitudes of the errors from the DEM generation and orthophoto projection were analyzed. Also, the calibration program was developed to verify the geometric distortion of the automatic scanner to contribute to enhance the quality of the aerial photo image DB.

• Applied Chemistry for Engineering
• /
• v.25 no.1
• /
• pp.27-33
• /
• 2014

The significance of soil environment is gradually increased due to the soil and underwater contamination caused by petroleum leak accidents. It requires a high cost and long period for the purification of soil compared with other environmental matrix such as water and air. For this reason, it has been embroiled in a legal conflict to find the pollution source and charge of cleanup. In this study, we analyzed the physical properties and typical additives of jet fuel to search a method that can distinguish kerosene and jet fuel contamination. In particular, the chemical marker in kerosene was visualized by the developer and the additives in jet fuel, such as antioxidant and metal deactivator were detected by GC-MS. This study could be used to judge petroleum source at soil contaminant accident sites.

• Korean Journal of Metals and Materials
• /
• v.46 no.12
• /
• pp.788-799
• /
• 2008

This study is concerned with the effects of Mo, Cr, and V addition on tensile and Charpy impact properties of API X80 linepipe steels. Four kinds of steels were processed by varying Mo, Cr, and V additions, and their microstructures and tensile and Charpy impact properties were investigated. Since the addition of Mo and V promoted to form fine acicular ferrite and granular bainite, while prohibiting the coarsening of granular bainite, it increased the strength and upper shelf energy, and decreased the energy transition temperature. The Cr addition promoted the formation of coarse granular bainite and secondary phases such as martensite-austenite constituents, thereby leading to the increased effective grain size, energy transition temperature, and strength and to the decreased upper shelf energy. The steel containing 0.3wt.% Mo and 0.06wt.% V without Cr had the highest upper shelf energy and the lowest energy transition temperature because its microstructure was composed of fine acicular ferrite and granular bainite, together with a small amount of hard secondary phases, while its tensile properties maintained excellent.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.11 no.2
• /
• pp.13-26
• /
• 2001

This paper presents the network security modeling methodology and simulation using the hierarchical and modular modeling and simulation framework. Recently, Howard and Amoroso developed the cause-effect model of the cyber attack, defense, and consequences, Cohen has been proposed the simplified network security simulation methodology using the cause-effect model, however, it is not clear that it can support more complex network security model and also the model-based cyber attack simulation. To deal with this problem, we have adopted the hierarchical and modular modeling and simulation environment so called the System Entity Structure/Model Base (SES/MB) framework which integrates the dynamic-based formalism of simulation with the symbolic formalism of AI. Several simulation tests performed on sample network system verify the soundness of our method.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.9
• /
• pp.647-655
• /
• 2022

The Russian government is expanding strategic cooperation with foreign countries, including production partnerships, in order to secure civil aircraft manufacturing technology and advanced materials, with the aim of becoming the world's third-largest civil aircraft producer. In addition, the Russian government supports the development of the aircraft manufacturing industry and reorganizes the aircraft certification organization to pursue systematic aviation safety and make great efforts in international cooperation and certification activities for the export of aviation products. Establishing a cooperative system for safety and certification of civil aircraft between countries requires a process of mutual understanding and trust in the overall certification system. Therefore in this study, we wanted to analyze Russia's aircraft certification organization, law system, certification procedures to help Russia understand its aircraft certification system.

• Korean journal of aerospace and environmental medicine
• /
• v.29 no.2
• /
• pp.67-71
• /
• 2019

The health of licence holders (flight crew members and air traffic controllers) is recognized as an important element of aviation safety. The medical emergency symptoms that occur during the flight duty period without prior notice can interfere with human performance capabilities and threaten aviation safety. To prevent this, ICAO has been required to conduct a periodic medical assessment process of licence holders including routine analysis of in-flight incapacitation events and medical findings during medical to identify areas of increased medical risk and continuous reevaluation of the medical assessment process to concentrate on identified areas of increased medical risk. The supply and demand of licence holders have become a major issue due to the increase in air traffic around the world, and the pilot retirement age has been extended to 65 years. But, there is no significant change in the aviation medical assessments process. The follow up of the result of medical examination discovered through aviation medical examination is a very important part, but it has not been properly implemented, and the sick leaves and medical inflight incapacitation reporting system should be improved. The management of health risk factors for licence holders must be implemented to prevent aircraft accidents or aviation safety problems caused by health problems. In this paper, we propose the development plan and concrete improvement plan of the health risk management system of licence holders in Korea in terms of aviation safety.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.2D
• /
• pp.183-190
• /
• 2009

In order to improve continuous success and stabilization of high-speed rail in the future, Using Frequency of high-speed rail should be enhanced by improving satisfaction of high-speed rail passenger. High-speed rail is needed to hold the priority in competition means by comparing the traits of service of domestic air lines. This study utilizes structural equation modeling to develop model for estimating factors influencing to service through conducting survey questionnaire. It also uses reliability analysis, correlation analysis, factor analysis to examine the rationalization of items and to establish hypothesis of this research. The results show that KTX contains 'inner service' item that is considered to be ameliorated and that domestic airline present low performance of 'outer service' item. In other words, moving section which partly is under a limited condition is needed to be improved. In addition, access to airport and transfer to other transportations have to be improved as they show the lowest satisfaction.

• Journal of Aerospace System Engineering
• /
• v.17 no.2
• /
• pp.94-102
• /
• 2023

A nylon wire holding and release mechanism (HRM) has been widely used for deployable applications of CubeSat owing to its simplicity and low cost. In general, structural safety of solar panel with an HRM has been designed by performing structural analysis under a launch environment. However, previous studies have not performed thermal analysis for HRM in an on-orbit environment. In this study, Launch and Early Orbit Phase (LEOP) thermal analysis was performed to evaluate thermal stability of the mechanism in the orbital thermal environment of the pogo pin-based HRM applied to CubeSat. In addition, the effectiveness of the thermal design and performance of the pogo pin-based HRM were verified through a thermal vacuum test.

• Journal of Advanced Navigation Technology
• /
• v.25 no.6
• /
• pp.476-483
• /
• 2021

In order to maintain the safety of the airspace with ever increasing traffic volume, it is necessary to thoroughly analyze the collision risk with the current data. In this study, collision risk analysis was conducted using Detect and Avoid (DAA) Well-Clear (DWC) metrics, risk induces developed for the DAA systems of unmanned aerial vehicles. All flights in year 2019 that flew within the Incheon Flight Information Region (FIR) boundary were analyzed using the recorded Automatic Dependent Surveillance-Broadcast(ADS-B) data. High risk regions as well as trends by airports and seasons were identified. The results indicate that the risk is higher around the congested area near Incheon International Airport and Gimpo International Airport. Seasonally, the risk was highest in August that coincides with the Summer vacation period. The result will be useful for the baseline data for various aviation safety enhancement activities such as revision of routes and procedures and training of the field specialists.