• The Journal of the Convergence on Culture Technology
• /
• v.9 no.4
• /
• pp.509-515
• /
• 2023

As the trend towards expanding the functions of modern governments continues, there are also problems such as misconduct and waste that arise as government activities and operations increase. To solve these issues, countries are establishing and developing internal control mechanisms. In this process, the U.S. Inspector General system has been operating for over 40 years with the aim of balancing and overseeing the government and the legislature. Accordingly, this study analyzed in detail the development process of the inspector system, one of the internal control systems promoted by U.S. government agencies, the formation of an inspector community, and the deployment, cooperation, and supervision of inspectors. As a result, the internal control system of domestic government agencies also needs to continue research so that the government and parliament can maintain close relations and introduce the inspector system according to the domestic situation.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.20 no.4
• /
• pp.173-189
• /
• 2009

All publications of a country is a cultural heritage with the spirit of humanity, each National Library has to collect and preserve all publications produced in each country. Acquisition activity(Collection development) of each National Library is supported by a powerful legal deposit system. Therefore, this study has analyzed the legal deposit systems of the world countries, especially focussed whether or not the compensation for legal deposit, whether or not any sanction against not-depositing, Fine collection procedures against not-depositing, and the specific process for legal deposit. Based on these investigations, this study was to seek ways to contribute the legal deposit rates of National Library. It has proposed the following suggestions; Performing of legal deposit duty by itself, developing the system for supporting the legal deposit, establishing newly of legal deposit department, and improving the compensation for the legal depositor.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.19 no.3
• /
• pp.619-624
• /
• 2024

Scaling is one of the most basic dental gum treatments and involves removing tartar that has hardened on teeth. However, inexperienced and unprofessional removal of tartar may damage the gums, resulting in excessive bleeding or damage to the teeth. For this reason, scaling must be done delicately according to the gum structure of various people, and sufficient practice must be provided. Related departments at the university are conducting scaling exercises. However, from the perspective of students who have not had sufficient practice, selecting subjects and conducting practice is not easy, and practice subjects may also avoid participating in practice due to discomfort and anxiety. Accordingly, in this study, we designed and implemented a virtual reality practice system using VR to create a virtual patient rather than an actual subject and implement various gum shapes step by step to enable repetitive practice and various scaling experiences.

• Archives of design research
• /
• v.15 no.1
• /
• pp.59-67
• /
• 2002

In accordance with the fast changing circumstance, universities are now reaching, beyond the education place of simple delivery of knowledge and exchange of information, to a place of developing a specialty program related with the region and industry to achieve a competitive edge in education. Through these academic-industrial collaboration program, special knowledge and human resources in the university are utilized in the society and it may contribute to the development of industry and breed of career people based upon the real job site can be achieved. In addition, through the practical operation of such developed program, university may contribute to the enhancement of the competitiveness of the corporation to the activation and acceleration of the regional economy and finally to the enhancement of competitiveness of national industry in international level. This study tries to develop 3 technical instruction and support program related with the legion and industry which may conform to the ideals of university and its goal of education and can provide a platform for the education that is closely related with the regional industry and real job site iud may cope actively with the upcoming knowledge society and fast changing regional circumstances. This study will make research and analyze needs of design support from the industry in order to develop a academic-industrial cooperative design support program for the furniture industry which conforms to the regional characteristic and feature and develop and present contents of program in three area of development of furniture design technology, build-up of furniture design information system and establishment of order based education system. The proposed program is supposed to be operated practically and effectively and contribute to the development of new product, to enhancement of company image and finally to the maximization of corporate profit. Also this study is epected to be used as an important material for establishment of order-based education system which confirms to the job site needs that may be analysed from feedback of product results and for practical learning.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.4
• /
• pp.724-729
• /
• 2008

In the case of 'MAEMI', the Typhoon which formed in September, 2003, the largest-scale damage of tidal wave was caused by the co-occurrence of Typhoon surge and full tide. Until now Korea has been focusing on the calculating the amount of damage and its restoration to cope with these sea and harbor disasters. It is essential to establish some systematic counterplans to diminish such damages of large-scale tidal invasion on coastal lowlands considering the recent weather conditions of growing scale of typhoons. Therefore, the purpose of this research is to make the counterplans for prevention against disasters fulfilled effectively based on the data conducted by comparing and analyzing the accuracy between observation values and the results of estimating the greatest overflow area according to abnormal tidal levels centered on Masan area where there was the severest damage from tidal wave at that time. It's necessary utilize data like high-resolution satellite image and LiDAR(etc.) for correct analysis data considering geographical characteristics of dangerous area from the storm surge. And we must make a solution to minimize the damage by making data of dangerous section of flood into GIS Database using those data (as stated above) and drawing correcter damage function.

• Journal of Korea Water Resources Association
• /
• v.52 no.4
• /
• pp.279-289
• /
• 2019

Unlike other natural disasters, drought is a reoccurring and region-wide phenomenon after being triggered by a prolonged precipitation deficiency. Considering that remote sensing products provide consistent temporal and spatial measurements of precipitation, this study developed a remote sensing data-based drought outlook model. The meteorological drought was defined by the Standardized Precipitation Index (SPI) achieved from PERSIANN_CDR, TRMM 3B42 and GPM IMERG images. Bayesian networks were employed in this study to combine the historical drought information and dynamical prediction products in advance of drought outlook. Drought outlook was determined through a decision-making model considering the current drought condition and forecasted condition from the Bayesian networks. Drought outlook condition was classified by four states such as no drought, drought occurrence, drought persistence, and drought removal. The receiver operating characteristics (ROC) curve analysis were employed to measure the relative outlook performance with the dynamical prediction production, Multi-Model Ensemble (MME). The ROC analysis indicated that the proposed outlook model showed better performance than the MME, especially for drought occurrence and persistence of 2- and 3-month outlook.

• Journal of Korean Society of Forest Science
• /
• v.100 no.3
• /
• pp.466-475
• /
• 2011

This study purposed to analyze the spatial pattern and the amount of carbon emission at the deforestation area based on the administrative and GIS data. The total size of deforestation area in last nine years (2000-2008) was about 649 ha, and it was occurred annually about 72 ha. The occurrence rate of deforestation per administrative area in Wonju was about 0.74%. It was 0.34% higher than that of Kwangwondo, and 0.06% less than that of National rate. On the other hand, the forms of deforestation by purpose were not related to the administrative district unit. The number of deforestation forms was highest at settlements. second most frequent form is other land. Grassland showed the lowest score. In addition, the deforestations were more occurred which is closed to the existing housing and building rather than roads. The number of deforestation was 1.2 times higher based on 300m. Seventy percent of deforestation was occurred which is less than 0.5 ha in size, and it increased to 91% when the size is less than 1ha. The total size of theoretical carbon emission based on deforestation area was estimated at 23,424 tc, and average annual carbon emission was estimated by 2,603 tc. Carbon emission per ha was 36.1 tC/ha. This study results will be useful to construct the greenhouse gas statistical verification system against the Post-2012 by GIS.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.34 no.4
• /
• pp.251-255
• /
• 2021

a-Si is commonly considered as a primary candidate for the formation of passivation layer in heterojunction (HIT) solar cells. However, there are some problems when using this material such as significant losses due to recombination and parasitic absorption. To reduce these problems, a wide bandgap material is needed. A wide bandgap has a positive influence on effective transmittance, reduction of the parasitic absorption, and prevention of unnecessary epitaxial growth. In this paper, the adoption of a-SiO_x:H as the intrinsic layer was discussed. To increase lifetime and conductivity, oxygen concentration control is crucial because it is correlated with the thickness, bonding defect, interface density (D_it), and band offset. A thick oxygen-rich layer causes the lifetime and the implied open-circuit voltage to drop. Furthermore the thicker the layer gets, the more free hydrogen atoms are etched in thin films, which worsens the passivation quality and the efficiency of solar cells. Previous studies revealed that the lifetime and the implied voltage decreased when the a-SiOx thickness went beyond around 9 nm. In addition to this, oxygen acted as a defect in the intrinsic layer. The D_it increased up to an oxygen rate on the order of 8%. Beyond 8%, the D_it was constant. By controlling the oxygen concentration properly and achieving a thin layer, high-efficiency HIT solar cells can be fabricated.

• Journal of The Korean Association of Information Education
• /
• v.25 no.6
• /
• pp.973-985
• /
• 2021

The purpose of this study is to suggest the direction and implications of learning with AI in the future by analyzing the trends of research learning with AI in the field of education. For doing this, the final 78 papers published in domestic journals over the past three years from 2019 to July 2021 were selected for analysis through review. The analysis results are as follows. First of all, papers in 2020 among the three years were most published, and the most utilized research method was the qualitative research. In addition, according to the analysis by study subject, studies on elementary school students were the most common, followed by studies on college and graduate students. In the analysis by subject, research related to foreign language education was most utilized and chatbot was most used in the AI technology type. Finally, the research learning with AI accounted for the majority, and student support accounted for the majority as the type of education system learning with AI at the implementation stage among the areas of teaching and learning and evaluation. Based on these results, the direction and implications of learning with AI in the future were presented. This study is meaningful in that it grasped research trends of learning with AI in domestic from an overall perspective, and examined learning with AI focusing on the instructor-learner and the teaching and learning design process.

• Journal of Intelligence and Information Systems
• /
• v.28 no.1
• /
• pp.1-28
• /
• 2022

In recent years, many Internet giants have begun providing their own content services, which attract online users by offering personalized services based on artificial intelligence technologies. This study investigates the role of two firms' content services within the firms' online service network. We examine the role of Naver Webtoon, which can be characterized as a professional-generated content, within Naver's service portfolio, and that of Google YouTube, which can be characterized as a user-generated content, within Google's service portfolio. Using survey data on viewers' use of the two services, we analyze a valued directed service network, where a node denotes an online service and a relationship between two nodes denotes a sequential use of two services. We found that both Webtoon and YouTube show higher out-degree centrality than in-degree centrality, which implies these content services are more likely to be starting services rather than arriving services within the firms' interactive network. The gap between the out-degree and in-degree centrality of YouTube is much smaller than that of Webtoon. The high centrality of YouTube, a user-generated content service, within the Google service network shows that YouTube's initial role of providing specific-content videos (e.g., entertainment) has expanded into a general search service for users.