• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2017.11a
• /
• pp.72-73
• /
• 2017

인터모달 자동화물운송시스템 기술개발에 있어서 대차의 안정적인 운행이 가능하도록 전자적 신호를 통하여 차량의 구동을 제어하고 원격제어가 가능하도록 통신설비를 구축을 위한 대차주행제어시스템 기술에 대한 전반적인 기술검토를 추진하였다.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.175-181
• /
• 2007

본 연구에서는 지하철용 전동차의 현가장치를 구성하는 1차 현가장치 및 2차 현가장치의 강성 및 감쇠지수 변화가 전동차의 상하진동에 미치는 영향을 분석하였다. 실제 운행 중인 전동차에 대하여 액슬박스, 대차, 객차에서 측정된 진동 데이터를 바탕으로 대차와 차체로 구성된 2자유도계 해석모델을 생성하였고, 실측된 윤축의 진동을 입력신호로 하여 수치해석을 수행하였다. 1, 2차 현가장치의 강성 및 감쇠지수의 변화에 따른 응답을 고찰한 결과, 차량의 상하진동에 지배적인 영향을 주는 설계변수는 2차 공기스프링의 강성임을 알았다. 또한 이러한 결과는 ADAMS/RAIL 전산해석을 통해서도 검증할 수 있었다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.8 no.1
• /
• pp.101-109
• /
• 2000

Occupant protection in the side impact of a car became one of the most important issues of car crashworthiness due to high injury level in a side impact crash. An accurate simulation of the side impact crash is an essential tool for the reduction of development time and cost for side impact safety system. This paper describes a new test methodology that can accurately generate the crash pulses of a vehicle and a door in a very cost-effective manner, and then evaluates the injury values of the dummy for the various sled pulses. This test methodology is simple and easy to approach because the door velocity is controlled by the hydraulic actuator and brake and the seat velocity is only adjusted by the friction force of the hydraulic brake. The superiority of the proposed test methodology is proven by the evaluation of dummy's injury values according to the change of the pressure of the hydraulic brake and by the application as a tool for the development of side airbag.

• Journal of the Korean Society for Railway
• /
• v.5 no.2
• /
• pp.55-60
• /
• 2002

This study proposes the post-processor simulator construction of ultrasonic signal for integrity evaluation of railway truck. For these purposes, the ultrasonic signals for defects(crack) of weld zone in frames are acquired in the type of time series data and echo strength. The detection of the natural defects in railway truck is performed using the characteristics of echodynamic pattern in ultrasonic signal. The constructed post-processor simulator agree fairly well with the measured results of test block(defect location, beam propagation distance, echo strength, etc). Proposed post-processor simulator construction of ultrasonic in this study can be used for the integrity evaluation of railway truck.

• Journal of the Korean Society for Railway
• /
• v.13 no.3
• /
• pp.304-308
• /
• 2010

This paper presents a methodology for identifying track irregularity using a wavelet transfer function. An equivalent wavelet SISO (single-input single-output) transfer function is defined by the measured track geometry and the acceleration data measured at a bogie of a train. All the measured data with various sampling frequencies were rearranged according to the constant 25cm reference recording distance of the track recording vehicle used in the field. Before applying the wavelet transform, measured data were regressed by eliminating those out of the range. The inverse wavelet transfer function is also formulated to estimate track geometry. The closeness of the estimated track geometry to the actual one is evaluated by the coherence function and also by FRF (frequency response function). A track irregularity index is defined by comparing the variance of the estimation error from the intact condition and that from the current condition. A simulation study has been carried out to examine the proposed algorithm.

• Journal of the Institute of Convergence Signal Processing
• /
• v.4 no.4
• /
• pp.1-6
• /
• 2003

In this Paper, the moving image is detected by a collision preventive system. The noise of these images is reduced by a mean filter. In case of detecting a movement with a binary difference image the moving area is detected exactly by the labeling and the projective method. When the image move slowly with the tracking mode of the system, the center of the tracking window move to the previous tracking window. And the tracking windows are divided into a tracking mode and a coasting mode which are determine by the Contrast-Difference Correlation of the date obtained from a difference image. The coasting mode determine whether continue the tracking step or not comparing the coasting-time values to reducing the error by the disturbance. The coasting and tracking of these moving images are verified by the result of the simulation.

• Journal of the Korean Society for Railway
• /
• v.12 no.5
• /
• pp.678-686
• /
• 2009

A trial run of locally-developed tilting train has been in process on Chungbuk line since the test vehicle was first produced. For the system stabilization, interface verification among the systems including track, structure, catenary and signaling system, not to mention the rolling stock, is very crucial. Therefore, in this study, the dynamic rail force of the tilting (Hanvit 200), high-speed (KTX) and general (Mugunghwa) vehicle caused by driving in transition curve track was measured. And, it compared the tilting response with the other by using the measured rail force data in transition curve track, and then evaluated probability the range of load fluctuation for the variable dynamic vertical and lateral wheel load. As a result, a range of rail force by occurred a change of cant from the high-speed and general vehicle which had fixed bogie structure was distributed throughout small deviation. Otherwise, in case of the tilting train which was consisted of the pendulum bogie structure was distributed wide range about large deviation by changed of cant.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.441-445
• /
• 2008

LRT is eco-friendly transportation system and can be constructed at less than half cost of subway. Therefore many local governments have planned to construct a various type of LRT and some of them were already under construction. In Para. 2 of Art. 22 of the "Enforcement Decree of Urban Railroad Act" - safety standard of urban railroad vehicle, It can't be operated if "structures and devices" don't come up to standard required to safety operation. Constructor or operator should give an order or operate according to safety standard in Art. 3 of the Safety Standard of Urban Railroad Vehicle. Safety Standard of Urban Railroad Vehicle of 2000 was reformed once to tighten fire safety standard in 2004 after subway accident in Daegue. It was entirely made for medium and large-sized electric motor car. LRT, based on driverless operation and articulated bogie, has different safety standard in signalling devices and the axle load. etc. So many institutes related LRT have required to amend. In this paper, we described features of LRT vehicle and necessity of amendment and discussed how it should be amended.