• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10b
• /
• pp.493-495
• /
• 2003

최근의 휴대 전화는 단순한 음성 통신 기기 역할 뿐만 아니라 데이터 통신 기기로도 쓰이고 있으며, CDMA-2000 망 보급으로 인하여 데이터 통신 대역폭이 멀티미디어 데이터를 처리 할 수 있을 만큼 증대 되었다. 하지만 휴대 전화는 하드웨어 성능이 음성 통신 기기로 최적화 되어 있고 휴대성을 높이기 위해 저전력의 저 성능 프로세서를 탑재 하였기 때문에 소프트웨어 방식의 비디오/오디오 재생이 매우 힘들다. 특히. 널리 사용되는 비디오/오디오 표준(MPEG-x, H.26x, 등등)은 압축 최우선의 방식으로써 계산량이 매우 크기 때문에 휴대 전화에서 하드웨어 도움 없이 소프트웨어로만 재생하기에는 적합하지 않다. 본 논문에서는 이러한 문제를 해결하기 위해 먼저 일반 목적의 널리 사용되는 코덱의 문제점과 휴대전화의 하드웨어 자원에 관해 알아 보고, 연산량을 효과적으로 조절할 수 있는 웨이블릿 함수를 이용하여 휴대 전화 시스템에 적합한 비디오/오디오 코덱을 제안한다. 또한 비디오 디코딩에 필요한 연산을 측정하고 실제 휴대 전화에 적용하여 그 성능을 확인 한다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.11
• /
• pp.2451-2456
• /
• 2011

This paper is a study on the high power amplifier to fulfill standards of the MOPS. VDR's frequency band is 117.975~137MHz, and CSMA(Carrier Sense Multiple Access), D8PSK(Differential Eight Phase Shift Keyed), 25KHz's channel bandwidth use. It also stated in DO-281A MOPS output power, symbol constellation error, spurious emissions, adjacent channel power must be met. We designed and measured the performance. The 38dB of the IM3 satisfies the MOPS standard.

• Journal of IKEEE
• /
• v.9 no.2 s.17
• /
• pp.79-86
• /
• 2005

Increasing network traffic and multimedia application services need realtime analysis of network traffic for improvement of QoS and effective management of network resource. Because difficulty of measurement based on software method, study of meter architecture for efficient capture function is necessary. Therefore we design and implement hardware metering system for efficient packet capture using embedded linux. And we analyze required bandwidth of system bus and memory for 10Gbps traffic through simulation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.5
• /
• pp.479-488
• /
• 2003

Dual-band microstrip antenna is designed for industrial-scientific-medical(ISM) band of 2.4 GHz and 5.8 GHz using finite-difference time-domain method(FDTD). Cross patch 130 by aperture in the ground plane of microstrip line is proposed as radiation element of antenna which is 2 rectangular patch is overlapped. To design antenna, change of input impedance is examined by length change of aperture and stub. And center frequency and - 10 dB bandwidth are investigated by change of length and width in radiation element. Measured result about reflection loss confirm that agree well with simulation results of FDTD and IE3D. And 3 dB beam width, front to back ratio and maximum gain is presented by measuring radiation pattern of antenna in frequency 2.43 GHz and 5.79 GHz.

• Journal of Advanced Navigation Technology
• /
• v.20 no.1
• /
• pp.93-98
• /
• 2016

The purpose of this study is to design for MOB antenna attached on safety helmet using microstrip patch antenna. The patch antenna is fabricated in 0.2 mm FR-4 substrate with $64{\times}64mm$ size. The proposed antenna is based on a slot-ring design which cover Inmarsat (1.52 ~ 1.65 GHz) and GPS (1.575 GHz) frequency band. To obtain the optimized parameters, HFSS simulator is used, and antenna is designed by optimized parameters. After antenna was etched, SMA connector was attached to the microstrip feeding line and the result between antenna simulation and measurement was analyzed. Proposed antenna is satisfied the -10 dB bandwidth requirement while simultaneously covering the 1.53 ~ 1.65 GHz.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.12C
• /
• pp.1299-1305
• /
• 2002

Tx/Rx dual microstrip array antennas for satellite communications are designed, fabricated, and measured in this paper. They have a Right Handed Circular Polarization (RHCP) for Tx and Left Handed Circular Polarization (LHCP) for Rx. Two stacked patches are used for wideband characteristics and corner-truncated square patches are adopted for a circular polarization. To enhance bandwidth characteristics of a circular polarization, 2${\times}$1 sequential rotation mays are applied. From the measured results, 8${\times}$1 microstrip may antennas have a good agreement with those of the simulation. Therefore the array antennas are applicable to satellite communication antennas, active phased may antennas, and radiators in other antennas.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.9
• /
• pp.1013-1022
• /
• 2010

In this paper, we propose a C-band radiometer for remote sensing of land surface temperature and present its experiment results using asphalt as target. Total power type is selected for high sensitivity and low power consumption, super-heterodyne type is selected for stable high gain. A radiometer designed at 5.1 GHz to have operating bandwidth of 110 MHz has system gain of 59 dB, noise figure of 2.7 dB and receiving sensitivity of 0.45 K. We have measured surface temperature on asphalt by using implemented system and thermometer. Analysis data of each measurement results show that a radiometer operates linearly with output voltage variation rate of 6 $mV/^{\circ}C$. As a result, we verified validity of a developed C-band radiometer for remote sensing of land surface temperature.

• Korean Journal of Optics and Photonics
• /
• v.16 no.5
• /
• pp.469-475
• /
• 2005

An integrated photonic microwave bandpass filter has been proposed and demonstrated incorporating a coherently coupled microring resonator in low-loss polymers. The proposed device may feature compact site, simple structure, tuning via the thermooptic and electrooptic effect, and flexible integration with other electrical and optical devices. The resonator was designed to have an extremely small bandwidth so that it could be used to selectively pass the optical signal carrying the microwave signal to attain efficient bandpass filtering. We made and tested two resonators with a single ring and double rings, and performed a theoretical fitting of their measured transfer curves to predict the performance of the microwave filters based on them precisely. It was found that as the number of the rings used for the resonator increases, the bandwidth gets smaller, the rolloff sharper, and the band rejection higher. Finally our filter exhibited the center frequency of 10GHz, the 3-dB bandwidth of 1.0GHz, the corresponding quality (Q) factor of 10, and the rejection outside of the passband of more than 25dB.

• Journal of Broadcast Engineering
• /
• v.18 no.3
• /
• pp.435-444
• /
• 2013

ATSC terrestrial DTV system can support high data rates for HDTV(High Definition Television) service, but it suffers from significant performance degradation caused by multipath fading. Thus, it is necessary to analyze multipath fading effects in order to enhance the DTV reception performance. Generally, DTV channel profile can be obtained by auto-correlation between reference pseudo random signal and received DTV signal. However, in the ATSC terrestrial DTV system, the estimation performance of DTV channel profile may be decreased due to the VSB modulation features. In this paper, improved DTV channel profile measurement technique is analyzed and proposed.

• Journal of KIISE:Information Networking
• /
• v.31 no.1
• /
• pp.91-100
• /
• 2004

This paper presents a receiver-driven TCP flow control mechanism, which is adaptive to the wireless condition, for memory constrained mobile receiver. A receiver-driven TCP flow control is, in general, achieved by adjusting the size of advertised window at the receiver. The proposed method constantly measures at the receiver both the available wireless bandwidth and the packet round-trip time. Depending on the measured values, the receiver adjusts appropriately the size of advertised window. Constrained by the adjusted window which reflects the current state of the wireless network, the sender achieves an improved TCP throughput as well as the reduced round-trip packet delay. Its implementation only affects the protocol stack at the receiver and hence neither the sender nor the router are required to be modified. The mechanism has been implemented in real environments. The experimental results show that in CDMA2000 1x networks the TCP throughput of the proposed method has improved about 5 times over the conventional method when the receiver's buffer size is limited to 2896 bytes. Also, with 64Kbytes of buffer site, the packet round-trip time of the proposed method has been reduced in half, compared the case with the conventional method.