• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.5B
• /
• pp.481-488
• /
• 2006

This paper suggests a novel approach of integrating the quasi-distributed watershed model SWAT with the fully-distributed groundwater model MODFLOW. Since the SWAT model has semi distributed features, its groundwater components hardly considers distributed parameters such as hydraulic conductivity and storage coefficient. Generating a detailed representation of groundwater recharge, head distribution and pumping rate is equally difficult. To solve these problems, the method of exchanging the characteristics of the hydrologic response units (HRUs) in SWAT with cells in MODFLOW by fully combined manner is proposed. The linkage is completed by considering the interaction between the stream network and the aquifer to reflect boundary flow. This approach is provisionally applied to Gyungancheon basin in Korea. The application demonstrates a combined model which enables an interaction between saturated zones and channel reaches. This interaction plays an essential role in the runoff generation in the Gyungancheon basin. The comprehensive results show a wide applicability of the model which represents the temporal-spatial groundwater head distribution and recharge.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.119-119
• /
• 2010

무한 지속 가능한 지열 에너지를 활용한 공조시스템인 지열원 냉난방 시스템은 기존의 공조 시스템보다 열원이 안정적이기 때문에 높은 효율과 우수한 성능을 가지므로, 기후변화협약 대응의 주요수단으로서 기술개발과 보급이 증대되고 있다. 본 연구에서는 대수층 축열 지열원 열펌프 시스템에 대한 실증 연구를 통하여 대수층 축열 지열원 열펌프 시스템의 하절기 냉방 성능을 분석하였다. 대수층 축열 냉난방 시스템은 주입정과 양수정의 2개의 우물공이 설치되어 있으며, 겨울 난방 운전 중에 한 개의 우물공으로부터 지하수를 열펌프로 유입한 후 낮은 온도의 지하수를 타 우물공에 축열하고, 하절기에 겨울에 저온으로 축열된 우물공으로부터 지하수를 열펌프로 유입하여 온도가 증가된 지하수를 타 우물공에 주입한다. 즉, 계절별로 열펌프에서 생성된 냉수와 온수의 대수층 축열을 위하여 계절별로 주입정과 양수정이 바뀌게 된다. 본 연구의 대수층 축열 지열원 열펌프 시스템의 2009년 8월의 주요일자별 시스템 운전 중의 평균 냉방 열펌프 유닛 COP와 냉방 시스템 COP는 각각 4.7과 3.4이상의 우수한 성능을 나타냈다. 또한, 모든 일자에 대하여 외기온도가 $31.6^{\circ}C$서 $22^{\circ}C$까지 변화가 크게 나타났지만 열펌프 유닛 COP와 시스템 COP의 변화는 미소하였다. 이는 양수정으로부터의 지중 순환수가 운전기간 중에 $17.5^{\circ}C$로 일정하게 유지되었기 때문이다. 양수정과 주입정 사이에 5개의 관측공을 설치하였으며, 양수정 측에 인접한 관측공의 온도는 거의 변화가 없었으며, 단기간이지만 널리 사용되고 있는 수직밀폐형 시스템과 달리 지속적인 냉방운전 중의 양수 온도의 증가는 발생하지 않아 안정적인 성능을 나타냈다. 주입정에 인접한 모니터링 홀의 온도는 심도가 깊은 곳의 온도가 낮은 곳보다 높게 나타났다. 이는 냉방 운전 시 열펌프 유닛의 실외열교환기에서 지중 순환수가 냉매로부터 열을 취득하여 온도가 상승하면서 주입정측에 온열이 축열이 진행되었기 때문으로 분석되며, 하절기의 냉방 운전 시간이 증가할 경우 축열 효과는 더욱 증가할 것으로 예상된다. 양수정과 주입정 중간의 모니터링 홀의 온도는 2009년 8월 가동 중에 온도변화는 없었는데, 이는 양수정과 주입정 사이의 열간섭이 발생하지 않았기 때문으로 분석된다. 일자별로 운전 중의 열펌프 유닛 COP는 차이가 없었지만, 운전 및 정지 시간을 모두 포함한 시스템 소비전력과 냉방용량을 모두 합산하여 산정한 일일 평균 냉방 열펌프 유닛 COP와 냉방 시스템 COP는 일자별로 다소 차이가 발생하였는데, 이는 각 일자별로 열펌프 유닛 가동율의 차이로 인하여 열펌프 유닛 가동 전에 먼저 작동되는 지중순환펌프의 운전 소비전력의 차이와 열펌프의 단속운전 시의 열손실과 추거 소비전력의 차이 때문이다.

• Journal of Korean Society of Transportation
• /
• v.27 no.6
• /
• pp.119-127
• /
• 2009

It has been known that bus route and company related characteristics have influences on punctuality, but fewer research have been conducted. Independent variables used in this study were selected using correlation analysis, and OLS(Ordinary Least Square) and HLM(Hierarchical Linear Model) were employed to identify factors affecting bus punctuality(headway deviation). The results showed that ICC(intraclass Correlation Coefficient) is 0.10, indicating that hierarchical linear models are more adequate for these data because there is effective variation in the subjects between companies. Punctuality was found to be negatively associated with the number of vehicles, the number of persons per vehicle, and total travel time. On the other hand, average headway and company size have a positive relationship with punctuality. Therefore, the number of vehicles per route, average headway, and the number of vehicles managed by a company should be considered for more accurately evaluating the management of piunctuality.

• The Journal of Engineering Geology
• /
• v.29 no.3
• /
• pp.279-288
• /
• 2019

The groundwater drawdown at each monitoring well near a radial collector well along Anseong Stream, Korea, was measured and compared with the calculated drawdown using the mirror well concept. The drawdown calculation is performed by treating the collector well as a large vertical well in a homogeneous isotropic aquifer. The measured drawdown at each monitoring well is slightly different from the calculated value due to anisotropy in the hydraulic conductivity and aquifer thickness. The difference between the measured and calculated values at Well OW-7 is large, reaching approximately 48 cm, because a horizontal well is not installed along this direction. Sensitivity analysis of the hydraulic conductivity and aquifer thickness indicates that the hydraulic conductivity is more sensitive to groundwater level changes. Groundwater level changes become a concern when a radial collector well with a large pumping rate capacity is installed, which highlights the need to thoroughly investigate the aquifer characteristics in the surrounding area.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.5D
• /
• pp.605-610
• /
• 2009

The either satisfaction levels or limits of tolerance levels felt by the users in the certain space/region should be examined for measuring social capacity on the total amount of vehicles. The reliability of measuring social carrying capacity depends primarily on decreasing the strategic responding biases. To induce the honest responses to preferences, Dichotomous Choice which is specifically known as the Double-Bounded Dichotomous Choice was adopted in this research to suggest the measurement methodology of social carrying capacity on the total amount of vehicles in U-do island. The empirical test was carried out the U-do island, an administrative district of Jeju Special Self-Governing Province. The number of vehicles satisfied by the 10% of residents was 390 and the satisfactory vehicle number was decreased to 132 extended to 90% of residents. This research, based on the political decision making criteria, set up the social carrying capacity in U-do island. The vehicle number satisfied by 50% of residents was 227, which meant the same number of residents turn to be supporter in case of political actions.

• 한국해양학회지
• /
• v.26 no.4
• /
• pp.350-357
• /
• 1991

An experimental approach was applied to test the effects of stranded oils and dispersant cleanup on marine gastropods, Nodilittorina exigua, littorina brevicula and Purpura clavigera. They were exposed to Labuan crude, Dubai crude and Bunker C fuel oil. Direct oil contact caused death of gastropods within 96 hours. N. exigua and L. brevicula were more sensitive than P. clavigera at the exposure of Bunker C fuel oil. Toxic effects of Bunker C oil was slower than crude oils. direct contact to concentrated dispersant killed gastropods, while clean-up with diluted dispersant still gave severe damage. P. clavigera could escape from dispersed crude oil below 250 ppm. Oiling and dispersant clean-up may have severe effects on marine gastropods by rendering them washed out to sea.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05b
• /
• pp.298-303
• /
• 1996

액체금속로 IHX 의 열전달 해석모형을 개발하기 위한 일차적인 단계로서 교차류 열전달 모형특성에 대한 연구를 수행하였는 그 주요내용은 새로운 대수화 (finite differencing) 기법인 경계점 기법의 특성을 분석하여 이기법의 적절성을 확인하고 IHX 기하형태 및 운전 요건에 따른 격자수에 대한 요건을 분석하고 이로부터 IHX 해석에 간이 이차원 해석 모형 사용의 타당성을 확인하였다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.4
• /
• pp.667-675
• /
• 2016

The goal of this study is to be used as baseline data for transportation demand management. At the present time the number of registered car and householding car is increasing, so there is a need to analyze the car ownership pattern through household car hold status. Also, it is necessary to analyze the factor of increasing car. The research is proceeded with classifying as the household which is holding private cars or holding passenger cars and non passenger cars based on the result of the research of the household travel survey data. The result of this study is shown as follows. According to car ownership pattern, there are more households holding passenger cars only when they are holding less than 2 cars. Otherwise there are more households holding passenger car and non passenger car when they are holding more than 3 cars. Using the Ordered Logit Model, there are more differences in factors affects holding cars by variables of housing type and household properties.

• Applied Biological Chemistry
• /
• v.43 no.4
• /
• pp.231-235
• /
• 2000

The changes of calmodulin levels, calmodulin-binding proteins, and $Ca^{2+}$/calmodulin-dependent glutamate decarboxylase during the growth of tobacco suspension cells were investigated. Tobacco cells exhibited a typical growth curve, including an exponential growth phase between 3 and 5 days after inoculation, and an apparent stationary phase occurring after 5 day. Although slight changes were observed from sample to sample, calmodulin protein levels remained similar during the phases of culture growth. Several $Ca^{2+}-dependent$ calmodulin-binding proteins including 56, 46, 36, and 32-kDa proteins were detected in tobacco cell extracts. The 56-kDa protein was identified as glutamate decarboxylase by Western-blot analysis using an anti-GAD monoclonal antibody. The levels of GAD protein and the specific activity of GAD enzyme were highest during the middle exponential phase of the culture growth cycle. These data suggest that $Ca^{2+}$/calmodulin-dependent glutamate decarboxylase is modulated during the growth of tobacco suspension cells.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.3
• /
• pp.895-906
• /
• 2014

A fundamental study of the dynamically penetrating anchor (DPA - colloquially known as torpedo anchor) embedded into deep seabed was conducted using measurement data and numerical approaches. Numerical simulation of such a structure penetration was often suffered by severe mesh distortion arising from very large soil deformation, complex contact condition and nonlinear soil behavior. In recent years, a Coupled Eulerian-Lagrangian method (CEL) has been used to solve geomechanical boundary value problems involving large deformations. In this study, 3D finite element analyses using the CEL formulation are carried out to simulate the construction process of dynamic anchors. Through comparisons with results of field measurements, the CEL method in the present study is in good agreement with the general trend observed by in-situ measurements and thus, predicts a realistic large deformation movement for the dynamic anchors by free-fall dropping, which the conventional FE method cannot. Additionally, the appropriate parametric studies needed for verifying the characteristic of dynamic anchor are also discussed.