• The Journal of Engineering Geology
• /
• v.25 no.3
• /
• pp.331-337
• /
• 2015

A new technique is presented to detect unstable slope behavior, based on Hotelling's T² analysis of pore pressure and water content obtained during flume tests using granitic and gneissic weathered soils. Three sets of pore pressure-water content values were simultaneously obtained during each test, and T² statistics at the 90.0% and 95.0% confidence levels were calculated based on the correlations between values. The results show that unsuccessful detection of some local failures of the flume slope depended on the sensor position. In the case of global slope failures, anomalous behavior was detected between several hundred and several thousand seconds before the event as T² statistics exceeded the confidence interval 90%. Hotelling's T² analysis provides a single control criterion because it enables correlations between diverse measured values within the same slope; the criterion also includes stepwise criteria for a forecasting and warning system based on confidence levels.

• Journal of the Korean Geophysical Society
• /
• v.2 no.1
• /
• pp.65-74
• /
• 1999

From refraction data along four seismic profiles near Eonyang which the Yangsan fault passes through, the Slope Variation Indicators (SVI) are computed and interpreted in terms of fault distribution. The average velocities of 2,250-2,870 m/s are estimated using velocity-analysis functions for the target boundary along those profiles. The average velocity for Line 1 is approximately 600 m/s lower than ones for the other lines. The SVI's with amplitude greater than or equal to 0.5 ms/m are turned out to be located near faults shown on the high-resolution reflection section, as closely as one station spacing (3 m). Large amplitude SVI's are densely distributed near National Road 35, and the fault having the largest vertical slip is indicated to be located approximately 930 m west of the inferred fault on the published geologic map.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.29 no.2
• /
• pp.365-375
• /
• 2019

A PLC (Programmable Logic Controller) is a highly-reliable industrial digital computer which supports real-time embedded control applications for safety-critical control systems. Real-time operating systems such as uC/OS have been used for PLCs and must meet real-time constraints. As PLCs have been widely used for industrial control systems and connected to the Internet, they have been becoming a main target of cyberattacks. In this paper, we propose an execution code sanitizer to enhance the security of PLC systems. The proposed sanitizer analyzes PLC programs developed by an IDE before downloading the program to a target PLC, and mitigates security vulnerabilities of the program. Our sanitizer can detect vulnerable function calls and illegal memory accesses in development of PLC programs using a database of vulnerable functions as well as the other database of code patterns related to pointer misuses. Based on these DBs, it detects and removes abnormal use patterns of pointer variables and existence of vulnerable functions shown in the call graph of the target executable code. We have implemented the proposed technique and verified its effectiveness through experiments.

• Journal of the Korean Geotechnical Society
• /
• v.34 no.12
• /
• pp.83-92
• /
• 2018

The lapse of time may cause in the slope structure various deterioration phenomenon progresses in the ground of slope, and collapse due to deterioration of strength, resulting in a decrease in the service life. The approach to slope stability due to the ground deterioration is a different concept from the existing limit equilibrium analysis, which is limited to the physical characteristics and geometrical structure of ground. In this study, we conducted a comparative analysis of various literature studies related to the slope failure characteristics and behaviors to presented the optimal formulas for shear strength reduction, such as the exponential function, the logarithmic function and the inverse hyperbolic function. And then a case study was performed on cut slope of Gyeongbu High Speed Rail construction site along the Yangsan fault zone, where the slope failure of shale layer vulnerable to deterioration occurred. As a result, it was confirmed that landslide occurred due to reduction of shear strength by deterioration, as safety factor is approx. 1.0 at the time when the slope failure occurred. Based on the comprehensive case study, as a quantitative approach to the evaluation of slope stability due to deterioration of ground, finally we propose a method for evaluating slope stability with optimal strength reduction curves.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.9
• /
• pp.5-14
• /
• 2010

This study was aimed to suggest reliable information of shear strength characteristics due to change of saturation in the landfills or slopes during rainfall infiltration. According to the Mohr-Coulomb failure criteria, the characteristics of shear strength due to change of saturation were analyzed for the weathered residual soils which were sampled in the road construction site of Daejeon city. From the direct shear strength tests, the cohesions and the shear resistance angles were showed maximum values in the condition of optimum moisture content, and then decreased in the condition of wet side compaction. In this study, the cohesions were decreased more than 50% according to increasing saturation by infiltration for the compaction soils. But the reductions of the shear resistance angles were about $1{\sim}2^{\circ}$ which was small value, and thus the changes of the saturation were not nearly influenced the shear resistance angle. The influences of the saturation were seemed to very small for the residual strength parameters according to Mohr-Coulomb failure criteria.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.63-63
• /
• 2012

편광분석법(ellipsometry)은 대상 물질의 유전율 함수의 실수부와 허수부를 Kramers-Kronig 관계식의 도움 없이 그 물질상수를 정확히 측정할 수 있는 매우 우수한 기술이다. 이 기술의 큰 장점 중 하나는 빛의 편광상태의 변화를 이용한 비파괴적인 방법으로써 실시간 측정이 가능하며, 박막의 두께측정의 오차범위는 0.1 nm 이하로써 매우 정확하다는 것이다. 본 연구자는 이러한 우수한 측정 기술인 편광분석법을 고진공의 분자살박막증착장치(MBE) 와 결합하여 AlSb, AlP의 유전율 함수를 측정하였다. Al 계열을 포함하는 반도체 화합물은 Al의 산소친화력이 강해 대기 중에서 순수한 유전율 함수를 얻기가 불가능하다. 하지만 본 연구실에서 초고진공 상태의 MBE 챔버에서 시료를 성장시키는 동시에 실시간으로 편광분석기를 이용하여 측정하였고, 지금까지 발표된 결과들 중 가장 순수한 상태의 AlSb 유전율 함수를 얻어낼 수 있었다. 또한 순수한 AlP의 유전함수를 측정할 수 있었고, 이는 편광분석기를 이용한 최초의 실험결과로써 이차미분을 이용한 전이점 분석결과 이론적인 전자밴드구조에서 E1, E1+${\Delta}1$, E2에 해당하는 밴드갭들을 확인할 수 있었다. 또한 표면의 원자배열 구조와 실시간으로 일어나는 그들의 역학적인 현상들에 관한 정보를 얻을 수 있는 surface photoabsorption (SPA)를 metalorganic chemical vapor deposition (MOCVD)에 장착하여 실시간 모니터링이 가능하도록 하였다. SPA를 이용하여 GaAs/AlGaAs 양자우물구조의 성장을 원자층 수준으로 실시간 모니터링을 할 수 있었다. 그리고 SPA를 이용하여 MOCVD 안에서 InP에 As가 흡착 및 탈착되는 현상을 분석하여, As의 흡착이 두 단계에 의해 이루어짐을 분석하였다. 그리고 편광분석법의 빠르고 정확한 측정 기술을 규칙적인 구조체에서 전자기파의 회절을 구할 수 있는 Rigorous Coupled-Wave Analysis (RCWA) 계산방법과 결합하여 나노구조의 기하학적인 모양을 정확하고 빠르게 구할 수 있었다. 본 연구를 위해 규칙적인 3차원 Si 구조체 제작하여 편광분석기로 측정하고 $SiO_2$와 표면 거칠기를 고려하여 RCWA로 분석한 결과, 규칙적인 Si 구조와 산화막 층까지 정확하게 분석할 수 있음을 확인하였다. 또한 규칙적인 나노구조분석 연구를 넘어 불규칙적인 나노구조에 대한 분석 가능성을 보이기 위해 InAs 양자점을 증착하여 분석하였고, 이를 통해 편광분석법과 RCWA를 이용하여 불규칙적인 나노구조의 모양과 크기, 분포의 분석이 가능함을 보였다.

• Journal of Educational Research in Mathematics
• /
• v.27 no.3
• /
• pp.599-614
• /
• 2017

The purpose of this study is to compare and analyze middle school students' understanding of constant rate of change, in terms of observing, representing and interpreting dynamic functions in various ways using the SimCalc MathWorlds. For this purpose, parts of a class conducted for six students in the first grade of middle school were analyzed. The results suggested two implications for a class that used this program (SimCalc MathWorlds): First, we confirmed that the relationships between the two quantities that students notice in the same situation can be different. Second, the program helped students to develop a more comprehensive understanding of the meaning of the constant rate of change. The study also revealed the need to use technology in teaching and learning about functions, particularly to represent and interpret a given situation that involves the constant rate of change in various ways. Further, the results can contribute to developing contents and methods to teach functions using technology in consideration of students' different levels of understanding.

• Journal of Energy Engineering
• /
• v.22 no.1
• /
• pp.1-7
• /
• 2013

This paper attempts to estimate the residential electricity demand function, using survey data of 521 households in Korea. As the residential electricity demand function provides us information on the pattern of consumer's electricity consumption, it can be usefully utilized in predicting the impact of policy variables such as electricity price and forecasting electricity demands. We apply least absolute deviation(LAD) estimation as a robust approach to estimating parameters. The results showed that price and income elasticities are -0.68 and 0.14 respectively, and statistically significant at the 10% levels. The price and income elasticities portray that residential electricity is price- and income-inelastic. This implies that the residential electricity is indispensable goods to human-being's life, thus the residential electricity demand would not be promptly adjusted to responding to price and/or income change.

• Environmental and Resource Economics Review
• /
• v.13 no.1
• /
• pp.33-47
• /
• 2004

Even though the price of extracted but unprocessed coal has been available in Korea, the use of it as scarcity index would be inappropriate because of price subsidy. Following Halvorsen and Smith(1984), Kim and Lee(2002) derived estimates of the shadow price of unextracted coal by estimating the restricted cost function and differentiating with respect to the quantity of coal extracted. In Korea, however, due to the limited data the capital prices have been computed inconsistently case by case without relying on the robust formula like the Christensen-Jorgenson methodology used in US, which could result in biased estimators of the restricted cost function. In the paper the shadow prices of the resources in situ are obtained by measuring an input distance function defined by Shephard (1970), which requires only the data on the quantities of inputs and output. Empirical results for the Korean coal mining industry show that these shadow prices as a coal scarcity have increased fast by approximately three times in comparisons with those obtained by Kim and Lee.

• Environmental and Resource Economics Review
• /
• v.23 no.3
• /
• pp.453-472
• /
• 2014

Analyzing the effects of carbon emissions trading, which is scheduled to be introduced in Korea in 2015, requires an accurate assessment of $CO_2$ abatement costs by both industries and firms. Firms faced with regulatory constraints are unlikely to minimize their production costs due to rising production costs caused by allocative inefficiency of inputs. The use of a distance function would results in underestimation of $CO_2$ abatement costs, because it fails to capture the allocative distortion costs. Recognizing the disadvantage of the previous approach, first, this paper tests for allocative efficiency of input for the Korean steel industry over the period 1990-2010, then derives the marginal $CO_2$ abatement costs by applying a cost function approach. The hypothesis of allocative efficiency in inputs is rejected and the steel industry pays an annual average cost of 92,000 won in removing an additional ton of $CO_2$ over the sample period.