• Journal of Korean Society of Transportation
• /
• v.25 no.6
• /
• pp.185-196
• /
• 2007

The aim of this research is to develop a signal control algorithm using internal metering to minimize total delay that vehicles go through, in case a network is oversaturated. To calculate total delay on the network, the authors first detect vehicles' arrivals and departures in the network through the detecting system, and chase the vehicles' flow in the links with a platoon dispersion model. Following these, the authors calculate the queue length in all the inks of the network through the chase of vehicles, deduce the stopped time delay, and finally convert the stopped time delay to the approach delay with a time-space diagram. Based on this calculated delay, an algorithm that calculates the level of the internal metering necessary to minimize the deduced approach delay is suggested. To verify effectiveness of this suggested algorithm, the authors also conduct simulation with the micro-simulator VISSIM. The result of the simulation shows that the average delay per vehicle is 82.3 sec/veh and this delay is lower than COSMOS (89.9sec/veh) and TOD (99.1sec/veh). It is concluded that this new signal control algorithm suggested in this paper is more effective in controlling an oversaturated network.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.2
• /
• pp.1-11
• /
• 2013

This research proposed integrated expressway traffic management strategy using ramp metering and toll mainline metering. This research suggested a traffic signal optimization model for integrated operation of ramp and mainline metering based on Demand-Capacity Model that is used to optimize allowable input volume for ramp metering in FREQ model. The objective function of this model is sectional throughput volume maximization, and this model can calculate optimal signal timings for mainline metering and ramp metering. This study conducted an effectiveness analysis of integrated metering strategy using PARAMICS and its API. It targeted Seoul's Outer Ring Expressway between Gimpo and Siheung toll gate. As a simulation result, integrated operation of mainline and ramp metering provided more smooth traffic flow, and throughput volume of mainline increased to 14% in congested section. In addition, a queue of 400 meter was formed at metering point of toll gate. This research checked that integrated traffic management strategy facilitates more efficient traffic operation of mainline and ramp from diffused traffic congestion.

• Journal of Korean Society of Transportation
• /
• v.22 no.5
• /
• pp.123-137
• /
• 2004

The study on traffic assignment is actively being performed which reflect networks status using time. Its background is increasing social needs to use traffic assignment models in not only hardware area of road network plan but also software area of traffic management or control. In addition, multi-class traffic assignment model is receiving study in order to fill a gap between theory and practice of traffic assignment model. This model is made up of two, one of which is multi-driver class and the other multi-vehicle class. The latter is the more realistic because it can be combined with dynamic model. On this background, this study is to build multidynamic model combining the above-mentioned two areas. This has been a theoretic pillar of ITS in which dynamic user equilibrium assignment model is now made an issue, therefore more realistic dynamic model is expected to be built by combining it with multi-class model. In case of multi-vehicle, FIFO would be violated which is necessary to build the dynamic assignment model. This means that it is impossible to build multi-vehicle dynamic model with the existing dynamic assignment modelling method built under the conditions of FIFO. This study builds dynamic network model which could relieve the FIFO conditions. At the same time, simulation method, one of the existing network loading method, is modified to be applied to this study. Also, as a solution(algorithm) area, time dependent shortest path algorithm which has been modified from existing shortest path algorithm and the existing MSA modified algorithm are built. The convergence of the algorithm is examined which is built by calculating dynamic user equilibrium solution adopting the model and algorithm and grid network.

• Journal of Korean Society of Transportation
• /
• v.20 no.3
• /
• pp.159-168
• /
• 2002

The Highway Capacity Manual(HCM) suggests estimating the average green time for the performance evaluation of the traffic actuated operation and Provides the average green time estimation model. However, the model provides with much room for improvements. This document proposes a new analytical model that overcomes the shortage of the HCM model. The average green times estimated by the HCM model and the proposed model were compared. A computer program using the proposed model was coded for the study, while the ACT348 program was used for the implementation of the HCM model Through the comparison study based on the 1,196 hypothetical simulation data surrogating field data, it was found that the average green times estimated by the proposed model yields much nicer one-to-one linear relationship to the simulation results than the ones from the HCM model in both exclusive-only and shared-permitted cases. The R2 values of the proposed and the HCM models with those cases are 0.90 and 0.56, and 0.86 and 0.57, respectively.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.4 no.3 s.8
• /
• pp.51-59
• /
• 2005

To improve the quality of bus service, providing bus ravel time information to passenger through station screen. Generally, bus travel time information predict by using previous bus data such as neural network, Kalman filtering, and moving average algorithms. However, when they got a difficulty about bus travel time information because of the missing previous bus data, they use pattern data. Generally, nevertheless the difference of range is big. Hence in this research to calculate the bus travel time information when the bus information is missed, use queue detector's data which set up in link. The application of several factors which influence in bus link travel time, we used CORSIM Version 5.1 simulation package.

• Journal of KIBIM
• /
• v.5 no.2
• /
• pp.1-11
• /
• 2015

Despite a lot of research on BIM, there is no quantitative study to measure accurately the performance of BIM coordination service. Thus, this study suggested method to measure the performace of BIM coordination services, applying queueing models in the field of management science. To analyze queuing system of BIM coordination services, a group of BIM coordinator were selected. Through focus group interviews with experts were used in the analysis to derive mean arrival rate(${\lambda}$), mean service rate(${\mu}$) of BIM coordination services. Single-server queuing model(M/M/1), multiple server queuing model(M/M/s) is utilized for the BIM coordination services performance measurement in construction phase. This study has significant quantitative performance measurement approaches that can be utilized in the decision-making for the improvement of the BIM coordination services and to support the review of the alternatives accordingly. But There is a limit but it is difficult to take into account the increase or decrease of the cost of alternatives according to the review.

• Journal of KIBIM
• /
• v.8 no.1
• /
• pp.43-55
• /
• 2018

Recently, there have been increasing studies on the application of digital technology, which has its focus of the irregular building. However, most of these studies have not clarified the objective of the technology and the effectiveness of professional manpower on its performance. This study analyzes actual used technology and the role of specialty contractor. It presents a framework to quantify the performance of the specialty contractor. For these purposes, this paper presents a proposed method to evaluate the activities of specialty contractors using a queueing model. As an attempt to verify the model, an actual irregular building project, in which digital fabrication is applied, is investigated during the construction phase. In order to collect the digital fabrication data, digital fabrication reports and specialty contractor's work log of project are reviewed. In addition, Digital Fabrication input personnel, productivity data are collected through interviews with experts involving in the case project. Analysis of specialty contractor's performance in digital fabrication reveals that the wait status of project participants varies probabilistically depending on the digital technology application level. The results of this study are expected to contribute toward the improvement of the production level in the construction industry.

• Journal of the Korea Society for Simulation
• /
• v.13 no.1
• /
• pp.41-50
• /
• 2004

The purpose of this paper is to analyse the manager's policy to maximize the profit in a multiple-server queueing facility with a limited queue capacity. We assume that the level of advertizing effects on the arrival rate of customers to the facility. The model without ‘word of mouth effect’ is assumed that the arrival rate is independent on the qualify of service level. We estimate the service quality by the balking rate of customers from system. We extend this to the model with ‘word of mouth effect’. To achieve the maximum profit, the most important factor is the considerably high utilization of facility for both models. Given service rate, we should maintain an effective arrival rate to some extent. To this end, among the available options, an increase of advertizing effort is more desirable than reducing the fee if the service value of customers remains unchanged. We also investigate whether the variability of service time has a significant impact on determining the optimal policy. The cost of service variability is not so expensive as that in a single server model due to the reduced variability of service times in a multiple-server model.

• Journal of KIBIM
• /
• v.11 no.3
• /
• pp.34-44
• /
• 2021

This study quantitatively analyzes the work performance of the structural safety diagnosis team that diagnoses pipe racks. To this end, a method for evaluating the performance of the structural safety diagnosis team using the queuing model was proposed. For verification, the case of applying the existing method and the method of introducing a 3D laser scanner for one site was used. The period, number of people, and initial investment cost of each project were collected through interviews with case project experts. As a result of analyzing the performance of the structural safety diagnosis team using the queuing model, it was possible to confirm the probability of delay in the work of each project and the amount of delayed work. Through this, the cost (standby cost) when the project was delayed was analyzed. Finally, economic analysis was conducted in consideration of the waiting cost, labor cost, and initial investment cost. The results of this study can be used to decide whether to introduce 3D laser scanners.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.2D
• /
• pp.233-239
• /
• 2006

Most research for until at now link travel time were research for mean link travel time calculate or estimate which uses the average of the individual vehicle. however, the link travel time distribution is divided caused by with the impact factor which is various traffic condition, signal operation condition and the road conditional etc. preceding study result for link travel time distribution characteristic showed that the patterns of going through traffic were divided up to 2 in the link travel times. therefore, it will be more accurate to divide up the link travel time into the one involving delay and the other without delay, rather than using the average link travel time in terms of assessing the traffic situation. this study is it analyzed transit hour distribution characteristic and a cause using examine to the variables which give an effect at link travel time distribute using simulation program and determinate link travel time distribute ratio estimation model. to assess the distribution of the link travel times, this research develops the regression model and the fuzzy model. the variables that have high level of correlations in both estimation models are the rest time of green ball and the delay vehicles. these variables were used to construct the methods in the estimation models. The comparison of the two estimation models-fuzzy and regression model- showed that fuzzy model out-competed the regression model in terms of reliability and applicability.