• Title/Summary/Keyword: 대기행렬 관리

Search Result 37, Processing Time 0.023 seconds

Development of Exit-Ramp Control Strategy Avoiding Mainline Spillover for Urban Freeway (과포화 신호제어 기법을 응용한 도시고속도로 진출램프 제어전략의 개발)

  • 김영찬;이철기;허혜정
    • Journal of Korean Society of Transportation
    • /
    • v.19 no.3
    • /
    • pp.89-100
    • /
    • 2001
  • 내부순환로의 진출램프 중 성산, 홍은, 홍제, 길음, 마장 진출램프에서는 램프의 지체가 심각하여, 진출차량의 대기행렬이 내부순환로 본선에까지 이르는 대기행렬 역류현상이 발생하고 있다. 이러한 본선으로의 대기행렬 역류는 본선의 혼잡을 가중시키고 교통사고의 위험도 증가시킨다. 본 논문에서는 이러한 도시고속도로의 진출램프 혼잡을 개선하기 위해 진출램프 제어전략을 개발하였다. 진출램프 제어전략의 목표는 진출램프의 대기차량이 본선으로 역류하지 않도록 하는 것이다. 대기행렬의 역류를 막기 위해서는 진출램프의 차량이 인접한 간선도로로 원활하게 진행하도록 해야 하며, 간선도로와 진출램프의 대기행렬을 제어정책에 따라 관리할 수 있어야 한다. 이를 위해서 진출램프 진출부에 신호를 설치하여 간선도로차량의 흐름을 제어하고, 진출부 하류부 교차로와 연동제어를 하여 진출공간을 확보하였다. 또한, 대기행렬의 관리를 위해서는 대기행렬 관리계수를 정의하고 이 값에 따라 현시를 결정할 수 있는 제어식을 유도하였다. 진출램프 제어전략은 과포화 신호제어 기법을 응용하여 개발하였으며, 그 중 Equity offset과 내부미터링 기법을 연동제어에 응용하였고, Imbalanced split 기법은 대기행렬 관리계수에 따라 현시가 결정되는 제어식의 개발에 응용하였다. 진출램프 제어전략을 평가하기 위하여 진출램프의 혼잡으로 인해 본선으로 대기행렬 역류가 발생하는 내부순환로의 홍은, 홍제 진출램프를 선정하였으며, NETSIM을 통해 진출램프 제어전략의 효과를 분석하였다. 분석결과 진출램프의 혼잡이 크게 개선되며, 운영자의 관리목적에 따라 대기행렬의 관리가 이루어지는 것을 볼 수 있었다. 진출램프 제어전략은 내부순환 도시고속도로뿐만 아니라 진출램프 제어가 필요한 타도시고속도로에서도 적용을 하면 좋은 효과를 얻을 수 있을 것으로 예상된다.

  • PDF

A Study of Traffic Flow Characteristics for Estimating Queue-Length in Highway (고속도로 대기행렬 길이 산정모형 개발을 위한 연속류 특성 분석)

  • 노재현
    • Proceedings of the KOR-KST Conference
    • /
    • 1998.10b
    • /
    • pp.297-297
    • /
    • 1998
  • 고속도로의 교통혼잡을 관리하기 위해서는 근본적으로 혼잡지점 상류부의 진입교통량을 제어해야 한다. 이를 위한 효과적인 램프미터링 운영전략이나 고속도로 교통정보제공방안을 수립하기 위해서는 혼잡영향권(대기행렬길이)에 관한 신뢰성 있는 데이터가 반드시 필요하다. 고속도로의 대기행렬길이를 산정하기 위해 일반적으로 충격파이론과 Queueing이론을 제시하고 있다. 그러나, 기존의 충격파 이론을 포물선형의 교통량-밀도관계식을 근거로 하고 있어 충격파간에 발생하는 부수적인 충격파를 해석하는 과정이 수학적으로 불가능하여 실질적인 목적으로 사용할 수 없음은 이미 잘 알고 있는 사실이다. 최근에 이러한 한계를 극복할 수 있는 새로운 방법으로 교통량 밀도간의 관계식을 삼각형으로 가정하고 교통량 대신에 누적교통량을 사용하는 Simplified Theory of Kinematic Waves In Highway Traffic이 개발(Newell, 1993)되었지만, 이 방법을 적용하기 위해서는 기본적으로 대상 고속도로 구간의 교통량-밀도관계식을 규명해야 하는 어려움이 있다.(사실 실시간으로 밀도데이터를 수집하기란 불가능하다.) Queueing이론에서 제시하는 대기행렬은 모두 대기차량이 병목지점에 수직으로 정렬하여 도로를 점유하지 않는 Point Queue(혹은 Vertical stack Queue)로서 실제로 도로상에 정렬된 대기행렬(Real Physical Queue)과는 전혀 다르다. 이미 입증된 바 있어, Queueing이론을 이용함은 타당성이 없다. 이러한 사실에 근거하여 본 연구는 고속도로 대기행렬길이를 산정할 수 있는 모형개발을 위한 기초연구로서 혼잡상태의 연속류 특성을 분석하는데 목적이 있다. 이를 위해, 본 연구에서는 서울시 도시고속도로에서 수집한 실제 데이터를 이용하여 진입램프지점의 혼잡상태에서 대기행렬의 증가 또는 감소하는 과정을 분석하였다. 주요 분석결과는 다음과 같다. 1. 혼잡초기의 대기행렬은 다른 혼잡시기에 비해 상대적으로 급속한 속도로 증가함. 2. 혼잡초기의 대기행렬의 밀도는 다른 혼잡시기에 비해 비교적 낮음. 3. 위의 두 결과는 서로 관계가 있으며, 혼잡시 운전자의 행태(차두간격)과 혼잡기간중에도 변화함을 의미함. 4. 교통변수 중에서 대기행렬길이를 산정하는데 적합한 교통변수를 교통량과 밀도로 판단됨. 5. Queueing이론에서 제시하는 대리행렬길이 산정방법인 대기차량대수$\times$평균차두간격은 대기행렬내 밀도가 일정하지 않아 부적합함을 재확인함. 6. 혼잡초기를 제외한 혼잡기간 중 대기행렬길이는 밀도데이터 없이도 혼잡 상류부의 도착교통량과 병목지점 본선통과교통량만을 이용하여 추정이 가능함. 7. 이상에 연구한 결과를 토대로, 고속도로 대기행렬길이를 산정할 수 있는 기초적인 도형을 제시함.

  • PDF

A Case Study on the Appropriate Construction Personnel of the Typical Floor of Apattment Frame Construction Using the Queueing Model (대기행렬 모형을 활용한 아파트 골조공사 기준층 인적 자원관리 선정사례에 관한 연구)

  • Lee, JeongWon;Kim, BoHee;Ham, NamHyuk;Kim, JaeJun
    • Korean Journal of Construction Engineering and Management
    • /
    • v.23 no.6
    • /
    • pp.3-14
    • /
    • 2022
  • Quantitative analysis of the number of construction workers and construction period can present a new standard for appropriate personnel. This study presents a Queueing model that predicts the execution time of work procedures, the most important factor among work efficiency indicators. During the working cycle of apartment frame construction the same process tends to be repeated the volume of contruction. Based on these characteristics, this study used a Queueing Model and analyzed reference layer cycle of the delayed frame construction. After adjusting the number of people and the construction period, the performance of the model was analyzed and suggested. This study aims to support the decision making of personnel distribution according to the volume of construction by performing a performance analysis of the Queueing Model.

A Study of Traffic Flow Characteristics for Estimating Queue-Length in Freeway (고속도로 대기행렬길이 산정모형 개발을 위한 연속류 특성 분석)

  • 노재현;손봉수;도철웅;신치현
    • Journal of Korean Society of Transportation
    • /
    • v.17 no.2
    • /
    • pp.179-191
    • /
    • 1999
  • To device effective freeway traffic flow control strategies and freeway traffic information dissemination strategies, it is very important to estimate real physical queue length on the freeway. Shock wave theory and queueing theory have limitation to be used to estimate the queue length. The primary objective of this study is to develop a reliable method for estimating the physical queue length and level of congestion. Queueing propagation processes were analysed by using such traffic data as main line traffic volume, ramp volume, density. speed, and physical queue length collected by video photographing on Olympic Freeway. As a result of analysis, it has been confirmed that the real queue length can be estimated by using the traffic counts arriving the congested region and passing a bottleneck location. Further more, a reliable method for estimating the level of congestion could be developed on the basis of real-time traffic counts.

  • PDF

Quantitative Queue Estimation and Improvement of Drive-Through with Queuing (대기행렬을 적용한 승차 구매점의 정량적인 대기열 산정과 개선방안)

  • Lee, SeungWon;Huh, SeungHa;Yoon, KyoungIl;Kim, JaeJun
    • Korean Journal of Construction Engineering and Management
    • /
    • v.24 no.1
    • /
    • pp.21-30
    • /
    • 2023
  • Excessive complaints and traffic jams occurred as customers who visited the Drive-thru waited in a long line. Company S recommends DT Pass to reduce the queues. Therefore, this study confirmed the improvement in performance of the queue increasing the number of stores operated by two servers insteaol of one using a queue model. And then confirmed performance improvement by dividing them into DT and DT Pass. After that, the L value derived through the queue model and the number of queues in each store were compared to calculate the number of queues to be additionally provided. Through this, the validity of selecting the minimum number of queues in the future is verified based on the results derived in this study.

A Study on the Queueing Process with Dynamic Structure for Speed-Flow-Density Diagram (동적구조를 갖는 대기행렬 모형: Speed-Flow-Density 다이어그램을 중심으로)

  • Park, You-Sung;Jeon, Sae-Bom
    • The Korean Journal of Applied Statistics
    • /
    • v.23 no.6
    • /
    • pp.1179-1190
    • /
    • 2010
  • Management of the existing traffic network and understanding current traffic conditions is the most important and effective way to solve traffic congestion. This research investigates the status of Korea expressway through the Speed-Flow-Density diagram and finds the best suitable queueing model for each area. Dynamic structure in the queueing model enables us to reflect the structural change of the road in case of traffic congestion. To find the best model and estimate the parameters, we use the Newton-Raphson method. Finally, we examine the road efficiency in view of the optimal speed and density using the conditional distribution of speed and density of a S-F-D diagram.

Determination of Minimum Spacing between Off-ramp Terminus and Intersection Considering the Influence of Adjacent Signalized Intersections (신호교차로 영향에 따른 도시고속도로 유출연결로 최소이격거리에 관한 연구)

  • Kim, Sang-Gu;Sim, Dae-Yeong;Heo, Du-Wan
    • Journal of Korean Society of Transportation
    • /
    • v.25 no.4
    • /
    • pp.79-87
    • /
    • 2007
  • The interchanges of urban freeways have many problems with traffic operation due to high off-ramp flows and frequent congestion at adjacent intersections. The flow exiting from off-ramps is affected by the operational status and traffic volume conditions of the nearest signalized intersection. As a result, off-ramp flow cannot exit and the queue backs up the freeway mainline when queues from the signalized intersection form up to the junction of the off-ramp and street. The spacing between an off-ramp and an adjacent intersection is likely to determine the traffic conditions at the adjacent intersection. However, the current design guidelines do not consider such a factor. This study is to develop a model calculating the spacing between off-ramps and adjacent intersections considering the signal, traffic, and road conditions. The variables affecting the model in this study are effective green time (g/C), volume-capacity ratio (v/c), the number of lanes, and off-ramp volume. Various scenarios are designed to represent the effects of the variables and the road networks are constructed using VISSIM, which is a common traffic micro-simulation software package. The queue length is derived from VISSIM and this length is considered as the recommended spacing between the off-ramp and the adjacent intersection. Through the simulation analysis, regression models are developed to calculate the queue length reflecting the various conditions such as signals, traffic, and road configurations. The developed model can be used to create road design guidelines to determine the location of off-ramps in the planning stage.

A Unified Approach for the Analysis of Discrete-time MAP/G/1 Queue: by Workload Analysis (일량분석에 의한 이산시간 MAP/G/1 대기행렬시스템의 통합적 분석)

  • Lee, Se Won
    • Journal of Korea Society of Industrial Information Systems
    • /
    • v.22 no.1
    • /
    • pp.23-32
    • /
    • 2017
  • In this paper, We suggest a unified approach for the analysis of discrete-time MAP/G/1 queueing system. Many researches on the D-MAP/G/1 queue have been used different approach to analyze system queue length and waiting time for the same system. Therefore, a unified framework for analyzing a system is necessary from a viewpoint of system design and management. We first derived steady-state workload distribution, and then waiting time and sojourn time are derived by the result of workload analysis. Finally, system queue length distribution is derived with generating function from the sojourn time distribution.