• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.551-551
• /
• 2017

우리나라와 동아시아는 경제 성장에 따른 전력수요가 크게 증가하였으며, 증가하는 대부분의 전력수요를 원자력으로 대체하고자 원전을 통한 전력생산 비중을 증가시키고 있다. 현재 중국은 13기의 원전을 가동 중이며, 동남 해안지대에 집중되어 있다. 또한, 건설 중인 원전은 27기로 전세계에서 건설 중인 원전의 41%를 차지한다. 원전의 증가에 따른 방사능 누출에 대한 위험성 역시 증가되고 있는 실정이다. 한국원자력안전기술원에서 중국 중서부지역에서 방사능이 누출될 경우 방사성 물질이 한반도로 이동하는 모의 상황에 대한 시뮬레이션을 통해, 원전 사고 발생 시 사흘 만에 제주도를 포함한 대한민국 전역이 방사성 물질로 뒤덮이는 것으로 분석하였다. 중국에서 누출된 방사성물질은 편서풍을 타고 한반도로 이동하게 되며, 일부는 낙진으로 유역 또는 하천에 유입되고 일부는 동해를 지나 일본으로 이동 할 것이다. 그동안 중국에서의 방사능 누출사고를 통한 방사성물질의 국내유입에 의한 영향에 대한 연구가 부족한 것이 현실이다. 이에 본 연구에서는 중국 텐완에서 원전사고 발생시 국내 하천에 어떠한 영향을 미치는지 분석하고자 환경다매체 모형을 이용하여 방사성물질(세슘, Cs-137)의 영향에 대한 모의를 진행하였다. 중국 텐완원전에서 방사성 Cs-137이 누출되어 춘천지역에 도달하였을 때의 대기중 농도 $5,650Bq/m^3$로 가정하여 모의 시나리오를 구성하였다. 모의 지역은 북한강 수계를 대상으로 하였으며, 7개의 중권역과 549.3 km의 하천이 포함되었다. 다매체 모형 모의를 통해 방사성물질 낙진으로 인한 Cs-137이 북한강 수계에 어떠한 영향을 미치는지 알아보고자 북한강수계의 팔당댐 부근의 오염농도를 모의하였다. 우리나라의 원자력시설 방호 방재법에 따른 상수원 취수기준(먹는물)은 100 Bq/L로 되어있다. 본 연구의 시나리오 모의결과, 모의 1일차에서 45 Bq/L, 모의 8일차에는 먹는물 기준 100 Bq/L를 초과하여 최대 119.56 Bq/L로 오염되는 것으로 모의되었다. 따라서, 반감기가 큰 방사성물질을 유입으로 오염된 하천은 개선하기 위해서는 오랜 시간과 높은 처리비용이 발생되기 때문에 인접국 또는 국내의 방사능 누출로 인한 상수원 오염 발생에 대비한 초기/중 장기적인 대응책 마련이 필요한 시점이다.

• Journal of Convergence for Information Technology
• /
• v.7 no.2
• /
• pp.83-90
• /
• 2017

To launch the product recently attached to IoT consumer electronics, smart phones and healthcare products around the large companies is a trend that is growing interest in the IoT. However, the country's small business environment is what the environmental improvement process that is easily accessible to the small business environment because the IoT technologies are difficult to apply the IoT technologies than any other country environment than desperate situation. In this paper, we propose a service operating model to improve production efficiency when the fusion manufacturing process is currently operating in the country SMEs and IoT technology. Proposed model using the manufacturing product information and sensor / dabayiseu information in the entire manufacturing process has as its object to utilize the IoT technology. Performance evaluation, the proposed model is more efficient than the previous model and 23.1% of the manufacturing process. In addition, it is increasing the manufacturing process was reduced by 17.3%, the average processing time as compared to the previous model. Finally, the personnel cost to be used in the manufacturing process was found to be an average decrease of 19.8% than previous model.

• Journal of Convergence for Information Technology
• /
• v.7 no.2
• /
• pp.119-124
• /
• 2017

Information is a valuable asset regardless of the size of the enterprise and information security is an essential element for the survival and prosperity of the enterprise. However, in the case of large corporations, Security is ensured through rapid introduction of information security management system. but In the case of SMEs, security systems are not built or construction is delayed due to complex factors such as budget constraints, insufficient security guidelines, lack of security awareness. In this paper, we analyze the actual situation of information security management of SMEs through questionnaires, and We would like to suggest a comprehensive security plan for SMEs in free or inexpensive ways. We believe that by applying the method presented in this paper, SMEs will be able to implement the lowest cost basic information security and will benefit SMEs who plan to establish an information security plan.

• International Area Studies Review
• /
• v.20 no.4
• /
• pp.163-184
• /
• 2016

Recently, many companies consider various methods for hiring employees. Hiring talent employee has made influences on the future of the company. Therefore, companies spend a lot of money for developing many tools on hiring employee. But most of companies don't try to review the comparison between the assessment system of hire and performance. There is few research on the performance results from the assessment scores of hiring. Only, the companies focus on hiring good employee who have good ability. Sometimes, HR managers are satisfied only with low quit rate. The paper analyzes what kind of relevance between the hire assessment and performance assessment for the same people. It uses the actual data for A company. This is very useful data for research on the relevance between hire and perform assessment. We can consider what the important things are for hiring and managing employee.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.312-315
• /
• 2014

Smoke generated from business establishments and factories will not only cause air pollution but also have a significant impact on the human body. Generally, the most common method for measuring the turbidity of the plume generated from the stack is a method of observing by the transmissometer mounted in the chimney or Method 9 from the US EPA(Environmental Protection Agency) which is a visual method of determining plume turbid emitted from stationary sources. However, these methods need a lot of cost to build and maintain. In this paper, we build a plume turbidity measurement module programs using light sensing. We design and implement a module which acquires the pictures of the plume using a digital camera and measures the turbidity of it using the DOM(Digital Optical Method). In addition, we demonstrate the excellence by comparing and analyzing implemented module and other methods.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.12
• /
• pp.1687-1692
• /
• 2019

In the era of the fourth industrial revolution, advanced technologies such as the Internet of Things(IoT) and big data are emerging. However, the level of application of IoT to indoor environment is very weak. Therefore, it is necessary to develop a system for analyzing air pollutants or indoor air quality through real-time monitoring using the IoT. This paper implements a system that measures indoor environmental values using Arduino and various sensors, and stores the information obtained from various sensors into a database of server. The information stored in the server was built as a database and utilized in the ventilation system or air cleaner installed in the home or company's room. In the proposed system, it is possible to check the immediate indoor environmental condition through the LED status display of the monitoring sensor module while reducing the cost of the sensor used to implement IoT technology.

• Applied Chemistry for Engineering
• /
• v.32 no.3
• /
• pp.237-242
• /
• 2021

Simultaneous removal technologies of multi-pollutants such as particulate matters (PMs), NOx, SOx, VOCs and ammonia have received consistent attention due to the enhancement of pollutant abatement efficiency in addition to the stringent environmental regulation and emission standard. Pretreatment of insoluble NO by an ozone oxidation can be considered to be more effective route for saving space occupation as well as operation cost in comparison with that of traditional selective catalytic reduction (SCR) process. Moreover the primary advantage of ozone oxidation process is that the simultaneous removal with acidic gas including SOx is also available. Herein, we highlight recent studies of multi-pollutant abatement via ozone oxidation process and the promising research topics for better application in industrial sectors.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.1
• /
• pp.141-148
• /
• 2022

Global climate change caused by greenhouse gases(GHG) is getting serious. To prevent this, countries around the world are regulating GHG emissions. Korea has decided to reduce GHG emissions by 37% compared to BAU (Business As Usual) by 2030. The transportation sector accounted for 18.58% of the domestic GHG emission, and roads accounted for 93.75% of the total. Public transportation is also included in the target of GHG reduction, and this study was conducted to reduce GHG emissions of bus public transportation, which can reduce GHG emissions while reducing the cost of road transportation. In this study, a simulation was conducted to predict the optimal GHG emission compared to the waiting time of passengers by adjusting the bus dispatch interval by implementing a greenhouse gas simulation model using Any Logic. If a more precise model is implemented in the future, it is expected that it will be used to reduce bus GHG emissions.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.64 no.2
• /
• pp.57-69
• /
• 2022

This study analyzes the fuel conditions and environmental effects of converting heating in rural villages that rely on fossil fuels into wood fuel. In particular, we tried to derive the most important considerations when using wooden chips as fuel in aging agricultural villages where various variables such as weather, facility characteristics, fuel quality, and maintenance capabilities work. Above all, an experiment was conducted by comparing it with oak trees to determine whether Italian poplar, a representative attribute water created to supply fuel wood in Korea, is suitable for heating fuel. Through experiments, 1) Even though the supply of poplar wood chips during 10 hours of operation was 60.74 kg less than that of hardwood chips, the production of hot water was 140 kWh higher. 2) The higher the exhaust gas temperature, the proportional (increase) oxygen concentration and inversely (decrease) PM and CO emissions. 3) Poplar has twice as much ash content as hardwood and three times more fine dust has been detected, but it meets all the standards for wood quality at the Korea Forest Science Institute. 4) Under the condition that there is a difference in water content (7.7%), hardwood cost 1.13 times more wood chips per 1 MWh than poplar, and even if the water content is corrected equally, hardwood cost 1.05 times more per 1 MWh than poplar. 5) In conclusion, it was proved that the fuel possibility, economic possibility, and environmental possibility of poplar wood chips are sufficient.

• Journal of Korea Society of Industrial Information Systems
• /
• v.14 no.2
• /
• pp.32-50
• /
• 2009

Since 1990 when order communication system(OCS) was first introduced, the use of information technology in medical service has been widely accepted in order to enhance quality and customer relationship as well as to increase managerial efficiency. Medical information system is rapidly increasing and is trying to make ubiquitous healthcare environment through telemedicine system. Especially, medical profession and government have taken interest in electronic medical record (EMR) system which can digitalize and manage all medical records in hospitals. By recording patient's medical information in real time, EMR system can improve service efficiency and customer service quality including short waiting time, various utilization of clinic information, and reduced cost.