• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2000년도 가을 학술발표회논문집
• /
• pp.90-100
• /
• 2000

The present paper investigates the elasto-plastic buckling of ball-jointed single layer latticed domes considering the connection characteristics. The domes are composed of tubular member elements, ball joints and connectors. To judge yielding of the member, the ends and central part of tubular member elements are assumed as five elasto-plastic springs. Elasto-plastic buckling load can be identified the yielding load of estimated member As a numerical analysis technique, loading incremental method based on the Newton-Raphson method is used. The effects of connection characteristics are investigated by the following points; (1) the length of rigid zone, (2) looseness of screw, (3) diameter of connector Finally, it is emphasized that the connection characteristics as well as the material non-linearity have significant effects upon the buckling toad of domes.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1997년도 봄 학술발표회 논문집
• /
• pp.240-247
• /
• 1997

Single-layer latticed domes, which ore consisted of slender linear elements, are able to transmit external loads to the structure by in-plane forces, therefore spatial structures can be constructed with the merit of its own lightweight. But, as external load reaches to any critical level at which each member has not material nonlinearity, the single-layer latticed dome shows unstable phenomenon. In particular, pin-connected single-layer latticed domes have much complicate unstable phenomena that are combined with nodal buckling and member buckling. Furthermore, single-layer latticed domes are very sensible to the initial imperfection which occurred inevitably in construction. In this study, we are going to grasp the characteristics of instability for the latticed dome by finite element method considering geometrical nonlinearity.

• 한국공간구조학회논문집
• /
• 제19권1호
• /
• pp.53-64
• /
• 2019

The objective of this study is to investigate the earthquake response for the design of 100m spanned single-layer lattice dome. The plastic hinge analysis and eigenvalue buckling analysis are performed to estimate the ultimate load of single-layered lattice domes under vertical loads. In order to ensure the stability of lattice domes, it is investigated for the plastic hinge progressive status by the pushover increment analysis considering the elasto-plastic connection. One of the most effective methods to reduce the earthquake response of large span domes is to install the LRB isolation system of a dome. The authors discuss the reducing effect for the earthquake dynamic response of 100m spanned single-layered lattice domes. The LRB seismic isolation system can greatly reduce the dynamic response of lattice domes for the horizontal and vertical earthquake ground motion.

• 한국공간구조학회논문집
• /
• 제4권3호
• /
• pp.103-109
• /
• 2004

본 논문은 조합하중을 받는 공간구조물의 안정경계를 파악하는 것이다. 구조물에 작용하는 독립된 여러 가지 하중벡터는 기본이 되는 하중 모드와 하중매개 변수를 이용하여 나타내고, 독립된 하중 매개변수에는 비례관계를 설정함으로서 하나의 하중변수에 의해 하중을 부여한다. 구조물의 좌굴하중 즉 임계점은 평형조건이 불안정이 되는 극한점과 분기점으로 분류되고, 가장 낮은 하중이 좌굴하중으로 정의된다. 본 논문에서는 기하학적 비선형 문제를 해석하기 위한 수치해석법으로는 호장법과 뉴턴-랩슨법을 이용하였으며, 본 해석을 통하여 안정경계를 파악함은 물론 좌굴모드 및 좌굴하중을 명확히 규명하였다.

• 한국공간구조학회논문집
• /
• 제16권4호
• /
• pp.45-52
• /
• 2016

The single layer latticed domes have attracted many designers and researchers's attention all of the world, because these structures as spatial structure are of great advantage in not only mechanical rationality but also function, fabrication, construction and economic aspect. But single layer latticed domes are apt to occur the unstable phenomena that are called "buckling" because of the lack of strength of members, instability of structural shape, etc. In the case of latticed dome, there are several types of buckling mode such as overall buckling, local buckling, and member buckling according to the shape of dome, section type of member, the size of member, junction's condition of member and so on. There are many methods to increase the buckling strength of the single layer latticed dome, that is, with the change of geometrical shape of dome, the reinforcement of buckled member, etc. Therefore, the purpose of this study is to verify the reinforcement effect of buckled member when designers reinforce the buckled member to increase the buckling strength of single layer latticed dome with 3-way grid.

• 한국공간구조학회논문집
• /
• 제1권1호
• /
• pp.117-124
• /
• 2001

In Single-layer latticed domes with rectangular network which is composed of ring of circumferential direction and rafter of longitudinal direction, that is, rib domes, if we use the cross-membered junction's method for the advantage in fabrication and construction, the eccentricity is occurred in the nodal point of crossing members. This paper is aimed at investigating the buckling characteristics for the effect of eccentricity according to rise-span ratios and distance of eccentricity. Analysis method is based on FEM dealing with the geometrically nonlinear deflection problems. The conclusion were given as follows: 1. The maximum decreasing ratio of buckling strength due to the junction's eccentricity is about 60% in models of this paper. 2. In the increasing ratio of buckling strength for rise-span ratio, that of Type 3 models is larger than that of type 2 models. On the other hand, that of Type 2 mode is larger than that of Type 3 for eccentricity-distance. 3. In the viewpoint of the value of buckling strength, that of Type 2 models is larger than that of type 3 models. The effect of the junction's rigidity on buckling strength is not great for overall models. Therefore if we use the cross-membered junction's method for the advantage in fabrication and construction, the method of Type 2 will have the great advantage of that of Type 3.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1998년도 가을 학술발표회 논문집
• /
• pp.290-297
• /
• 1998

In this paper, we propose to a method to estimate the elasto-plastic buckling for single layer latticed domes. First, we assume that each member consists of the rigid zone and elastic spring at both end joint, the elastic element and three elasto-plastic spring to judge for yeilding the member. Next, the member which has most influence on buckling for structures is determined by a distributed pattern of the strain energy which is calculated through linear eigenvalue analysis. And then, normalized slenderness ratio of the element is derived considering the axial force at elastic buckling load. Later, we execute elasto-plastic nonlinear analysis that based on loading increasement method and displacement increasement method. From this results, we discusses the effect of the joint rigidity and the half open angle $\theta$$_{0}$ on the buckling strength of single layer lattice domes ; (1) how the joint rigidity contributes to the reduction of buckling loads, (2) how the reduction can be interrelated to compressive strength curves in terms of the generalized slenderness for the member most relevant to the overall buckling of domes.s.

• 한국공간구조학회논문집
• /
• 제18권3호
• /
• pp.105-116
• /
• 2018

The objective of this study is to investigate the response reducing effect of a seismic isolation system installed between 300m dome and supports under both horizontal and vertical seismic ground motion. The time history analysis is performed to investigate the dynamic behavior of single layer lattice domes with and without a lead rubber bearing seismic isolation system. In order to ensure the seismic performance of lattice domes against strong earthquakes, it is important to investigate the mechanical characteristics of dynamic response. Horizontal and vertical seismic ground motions cause a large asymmetric vertical response of large span domes. One of the most effective methods to reduce the dynamic response is to install a seismic isolation system for observing seismic ground motion at the base of the dome. This paper discusses the dynamic response characteristics of 300m single layer lattice domes supported on a lead rubber seismic isolation device under horizontal and vertical seismic ground motions.

• 한국공간구조학회논문집
• /
• 제7권1호
• /
• pp.63-70
• /
• 2007

최근 복잡해진 도심지의 토지 이용률을 높이기 위하여 원형 강교각이 건설이 요구되고 있다. 원형강교각의 경우 줄어든 단면으로 좌굴 내하력이 감소하며 이에 대한 방안으로 수직 보강재의 적용을 고려할 수 있다. 그러나 수직보강재를 적용한 원형 강교각의 좌굴 내하력의 증가의 효과에 대해서는 아직 명히 파악되지 않았다. 본 연구에서는 먼저 탄소성 유한요소해석 통하여 보강재를 적용하지 않은 무보강 원형 강교각과 수직보강재가 보강된 원형 강교각에 대해서 좌굴내하력을 검토하였다. 그리고, 형상비(R/t)에 따른 좌굴내하력의 변화를 기존의 실험식과 비교하여 그 효과를 검토하였다. 그리고 원형강교각의 수직 보강재를 적용하여 폭과 두께에 따른 좌굴 내하력을 비교 검토하였다. 그리고 수직 보강재를 적용한 원형 강교각에 대한 내진성능을 검토하였다.

• 한국공간구조학회논문집
• /
• 제11권1호
• /
• pp.121-130
• /
• 2011

스페이스 프레임 구조물은 연속체 쉘 구조물의 원리를 이용하여 매우 넓은 공간을 효과적 으로 덮을 수 있는 구조물이지만 뜀좌굴 및 분기좌굴 등과 같은 불안정거동은 돔형 구조물에서는 더욱 복잡하게 나타난다. 또한 붕괴메커니즘의 이론적 연구와 실험적 연구결과들 사이에서도 많은 차이를 보인다. 본 논문에서는 미적 효과가 크며 단층의 대공간을 확보하기에 적합한 돔형 공간 구조물의 구조 불안정 특성을 접선강성방정식을 이용하여 비선형 증분해석을 수행하고, Rise-span(${\mu}$)비 및 하중모드($R_L$)에 따른 임계점과 분기점의 특성을 돔형 공간구조물의 예제를 통해 고찰하였다. 여기서 불안정점은 증분해석과정을 통해서 예측할 수 있었으며, 예제에서 낮은 ${\mu}$에서는 전체좌굴이, 높은 ${\mu}$의 경우는 절점좌굴이 지배적이며, 낮은 $R_L$에서 정점좌굴이, 높은 $R_L$에서는 전체좌굴이 지배적이고, 전체좌굴이 나타나는 경우, 분기좌굴하중은 완전형상의 극한점좌굴하중의 약 50%에서 70%의 분포를 보였다.