• Clinical and Experimental Pediatrics
• /
• v.50 no.8
• /
• pp.732-739
• /
• 2007

Purpose : A universal standard of the birth weight for gestational age cannot be made since birth weight distribution varies with races, nations and eras. This report aims to establish the birth weight for gestational age patterns by sex, plurality, and parity, specific for Korean live births. Methods : The national birth certificate data of all live births in Korea from January 2000 to December 2004 were used: for live births with gestational age 24 weeks to 42 weeks (n=2,585,5160), mean birth weight, standard deviation and 10th, 25th, 75th and 90th percentile values were obtained for each gestational age group by one week increment. To establish final standard values of Korean birth weight distribution by gestational age, the finite mixture model to eliminated erroneous birth weights was used for respective gestational age. Same as above method the birth weight for gestational age standard by sex, plurality, and parity were completed. Results : The male newborns are more heavier than female during the entire gestational age. The singletons are more heavier than twin during the entire gestational age. The para 2 are more heavier than the para 1 during the entire gestational age. Korean standard was more heavier in 10th and 50th percentile than Lubchenco's standard. Alexander's standard was more heavier in 50th and 90th percentile than Korean standard. Conclusion : These birth weight for gestational age patterns by sex, plurality, and parity are similar to the other standards. I hope that for Korean infants, this curve will help clinicians in defining and managing the large for gestational age infants and also for infants with intrauterine growth retardation.

• Korean Journal of Poultry Science
• /
• v.35 no.2
• /
• pp.171-176
• /
• 2008

Animal welfare advocates, claim that the induced molting by fasting be avoided. This study was conducted to evaluate the effect of molting induced by various feeding methods on productivity and egg quality in laying hens. We used 400 flocks of 60-week-old leghorn laying hens in four treatments(five replicates of 20 hens each): fasting method (C), feeding single corn grain diet (T1), feeding single wheat bran diet (T2) and feeding single alfalfa meal diet (T3). As the result of the experiment, egg production and daily egg mass significantly decreased only in T1 compared with the control during the $1{\sim}4th$ week after the secondary egg laying (P<0.05). Although the amount of feed intake was significantly less in T1 group during the $1{\sim}4th$ week compared to the control, no significant difference was detected during the total period (P>0.05). In addition, no significant difference of feed conversion was observed between treatment groups. In terms of egg quality, the egg shell thickness was significantly improved in T1 group than the control group by feeding only corn at the 10th and 14th week after the secondary egg laying (P<0.05), but the significant decrease was observed at the corn (T1) and wheat bran (T2) fed treatment groups than the control group at the 26th week of the experiment (P<0.05). The eggshell strength and haugh unit did not show any difference by the molting methods. Egg yolk color was significantly decreased in T1 and T2 group than the control group at the 6th week (P<0.05). However, T1 and T2 group resulted to show significantly high egg yolk color at the 18th week of the experiment (P<0.05). As the result of the experiment, no large difference was observed in the productivity by the feeding molting method and by the fasting induced molting method. In addition, the single diet fed feeding induced molting method by using alfalfa revealed to show more satisfactory trend than the corn or wheat bran single diet fed feeding induced molting methods even if no statistically significant difference was found in terms of egg productivity.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.436-439
• /
• 2011

본 논문은 클록 보정회로를 가진 1V 2.56-GS/s 6-bit flash analog-to-digital converter (ADC) 제안한다. 제안하는 ADC 구조에서 아날로그 블록은 단일 T/H와 2단의 프리앰프, 그리고 비교기를 사용된다. 2단의 프리앰프와 비교기의 출력에 옵셋의 크기를 줄이기 위하여 저항 평균화 기법을 적용하였다. 디지털 블록은 quasi-gray rom base 구조를 사용한다. 3입력 voting 회로로 flash ADC에서 발생하기 쉬운 bubble error를 제거하였으며, 고속 동작을 위해 단일 클록을 사용하는 TSPC F/F로 구현한다. 제안하는 flash ADC는 클록 듀티 비를 조절할 수 있는 클록 보정회로를 사용한다. 클록 보정 회로는 비교기 클록 듀티 비를 조절하여 리셋 시간과 evaluation 시간의 비율을 최적화함으로 dynamic 특성을 확보한다. 제안한 flash ADC는 1V 90nm의 CMOS 공정에서 설계되었다. Full power bandwidth인 1.2 GHz 입력에 대하여 ADC 성능을 시뮬레이션을 통해 확인하였다. 설계된 flash ADC의 면적과 전력소모는 각각 $800{\times}400\;{\mu}m^2$와 193.02mW 이다.

• Journal of KSNVE
• /
• v.8 no.2
• /
• pp.331-335
• /
• 1998

A design modification was made on the 9-th stage wheel dovetail of a high-intermediate pressure (HIP) turbine rotor for a fossil power plant that necessitates the use of new long-shank buckets for the row. A bucket vibration test is necessary to verify that the new 9-th stage buckets have adequate frequency margin from a nozzle passing frequency when running at speed. A finite element analysis (FEA) has been performed using a commercial S/W to approximately estimate bucket natural frequencies, and thus to help the vibration test. A row of the new buckets has assembled on the HIP rotor for the vibration tests using dynamic balancing facilities. The tests have been done during deceleration run with air excitation. The test results are compared with the calculation using our empirical formula, and show that the modified design meets the frequency-margin requirements.

• Proceedings of the Korea Contents Association Conference
• /
• 2003.05a
• /
• pp.303-307
• /
• 2003

The purpose of this paper is to develop the model of the customer's satisfaction score for web site providing science & technology contents. The most important issue for the customer's satisfaction score is providing more appropriate information service about science & technology. Internet questionnaire method was used to collect data of the satisfaction level of customers. Data was collected from December 15th though December 30th, 2002. There were 2, 092 respondents to questionnaire. Statistical analysis were used in this Study. The score of the customer's satisfaction for web site providing science & technology contents is 87.13 which is from our customer's satisfaction score model.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.887-890
• /
• 2005

The double gate(DG) MOSFET is a promising candidate to further extend the CMOS scaling and provide better control of short channel effect(SCE). DGMOSFETs, having ultra thin updoped Si channel for SCEs control, are being validated for sub-20nm scaling, A channel effects such as the subthreshold swing(SS), and the threshold voltage roll-off(${\Delta}V_{th}$). The propsed model includes the effects of thermionic emission and quantum tunneling of carriers through the source-drain barrier. The proposed model is used to design contours for gate length, channel thickness, and gate oxide thickness.

• Journal of Chest Surgery
• /
• v.31 no.1
• /
• pp.73-76
• /
• 1998

We report very rare case of concurrent bronchial atresia and bronchogenic cyst. Morphologic apical segment of right upper lobe directly stemmed from right main bronchus. Bronchogenic cyst was communicating with atretic segmental bronchus and both were filled with mucus. The etiology is not well known, however it is likely that a single insult arround the 5th∼6th week causes both malformations.

• Journal of Korea Fair Competition Federation
• /
• no.156
• /
• pp.64-77
• /
• 2011

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2000.05a
• /
• pp.31-31
• /
• 2000

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.30 no.1
• /
• pp.53-63
• /
• 1994

The conventional cold-heading process for the production of a bolt-shaped product is composed of some process and two or three blows heading. The strength of a bolt-shaped product produced by multi-blow heading depends on the working conditions of the heading process such as preforming die angle, corner-radius of the necked portion of product, and the reduction in height during pre-forming. Arigid-plastic finite-element program(RDHPSC) has been coded and the program testified by comparison with the results of experimentation. A method of testing the optimum die-conditions in the double-blow heading process by use of RDHPSC analysis is discussed a fundamental structures of CAD/CAPP system for two-blow heading process is discussed.