• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2001.11a
• /
• pp.347-348
• /
• 2001

마이크로스트립 안테나가 가지는 가장 큰 단점인 협대역 특성을 개선하기 위해 그 동안 수많은 연 구와 방법들이 제안되었는데 특히 원형편파 안테나는 임피던스 대역폭 외에 축비 대역폭까지도 고려 되어야 하므로 더욱 심화된 협대역의 특성을 가지게 되어 설계에 많은 어려움이 있었다. 일반적으로 원형편파 마이크로스트립 안테나를 설계하는 방법 중 급전 구조면에서는 크게 단일 급전 방식과 하이 브리드 형태의 급전방식이 있다. 단일 급전 방식의 원형편파 안테나는 구조가 간단하고y 제작이 간편 하며, 안테나의 물리적 크기를 줄일 수 있어 배열시 장점이 있으나 구조의 특성상 협대역의 축비 대역 폭을 가지며I 하이브리드 급전 원형편파 안테나는 구조가 복잡하고, 제작이 어려우며, 안테나의 물리적 크기가 커진다는 단점이 있으나 광대역의 축비 대역폭을 가진다. 따라서 원형편파 안테나의 설계시 축 비 대역폭과 안테나의 물리적 크기 간의 trade-off를 고려하여야한다. 최근에는 이를 고려한 단일 급전 을 이용하면서도 개선된 축비특성올 얻을 수 있도록 십자개구 개구를 통해 두 개의 직교 모드를 방사 패치에 급전하는 구조가 제안되기도 하였다. 하지만 이는 일반적인 단일 급전 방식보다 개선된 축비 대역폭을 얻을 수 있었으나 중심주파수에서 2.5%에 불과하였다. 본 논문에서는 단일 급전 십자개구 결합 방식이 가지는 협대역의 축비 대역폭을 개선하기 위해 단 일 급전으로 하이브리드 급전의 효과를 가져올 수 있는 직렬 급전 십자개구 결합 마이크로스트립 안 테나를 제안하였으며, 기존에 발표된 단일 급전 십자개구 결합 안테나와의 축비 대역폭, 이득, 방사패 턴, 그리고 임피던스 대역폭 둥과 비교하여 개선된 특성을 제시하고 제안된 안테나의 타당성을 보였 다. 실제로 2.4GHz의 주파수에서 제안한 직렬 급전 십자개구 결합 단일 마이크로스트립 안테나의 측 정결과 기존에 연구된 안테나보다 약 2배정도 증가된 4.6%의 축비 대역폭, 10%의 임피던스 대역폭 (VSWR<1.5), 그리고 8.2dBi의 최대이득 특성을 확인할 수 있었으며, 이를 바탕으로 시권셜 로테이션 기법올 사용한 $2\times2$ 배열 안테나는 17.5%의 축비 대역폭, 20.8%의 임피던스 대역폭(VSWR<1.5), 그리 고 12.5dBi의 최대이득을 얻을 수 있었다. 이에 해당하는 제안된 단일 안태나와 $2\times2$ 배열 안테나의 구조, 측정된 축비 대역폭 및 이득특성, 그리고 입력 반사손실을 그림 I, 2, 3에 각각 나타내었다.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1992.10a
• /
• pp.200-203
• /
• 1992

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.4
• /
• pp.393-400
• /
• 2002

In this paper, a novel series feeding cross-aperture coupled microstrip antenna with the effect of hybrid feeding is proposed and demonstrated experimentally to improve narrow axial ratio bandwidth of cross-aperture coupled antenna with single feeding among the various methods for generating circular polarization. The validity of a proposed series feeding cross-aperture coupled microstrip antenna is shown by comparing experimental results between the reported and the proposed microstrip antenna, and 2${\times}$2 array microstrip antenna based on the proposed single microstrip antenna used sequential rotation technique to accomplish broader axial ratio bandwidth. In the proposed single and 2${\times}$2 array microstrip antenna, the measured axial ratio bandwidths are 110 ㎒(4.6%) and 420 ㎒(17.5%), maximum gains are 8.2 ㏈i and 12.5 ㏈i, 3 dB gain bandwidths are above 400 ㎒(16.7%), and impedance bandwidths for the VSWR<1.5 are 240 ㎒(10%) and 500 ㎒(20.8%), respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.7
• /
• pp.1138-1147
• /
• 1999

In this paper, two types of $2\times2$ Rx/Tx microstrip patch antenna are proposed to implement Ku-band satellite communications. The single-fed dual resonance patch antenna as the first type derives perpendicular polarizations at two resonant frequencies from a single patch radiator, using aperture coupling via a bended single-feeding line and a cross-shaped slot. The double-fed dual resonance patch antenna as the second type implements dual resonance with mutually orthogonal polarizations by mixing the two feeding mechanisms of the microstrip line and the aperture coupling. Especially, in the double-fed dual resonance antenna case, air-gap is introduced to broaden the bandwidth. Through measurement, each of the two types of antenna was verified to function properly both Rx and Tx. The double-fed dual resonance antenna shows excellent performance in the bandwidth and the crosspolarization characteristics.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.2
• /
• pp.811-815
• /
• 2013

In this paper, we proposed and fabricated the single feed microstrip patch antenna with slot for S-DMB(Satellite-Digital Multimedia Broadcasting). In order to improve of frequency properties, patch size, feed length, and slot size were investigated by HFSS simulation program. The manufactured single feed microstrip patch antenna with slot showed that the measured center frequency, the minimum return loss and -10dB bandwidth were 2.64GHz, -34.67dB and 180MHz, respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.9
• /
• pp.800-807
• /
• 2016

In this paper, we study the characteristics of dual band microstip antenna with modified inset feeder and a single slot. The modified inset feeder consists of the vertical inset feeder placed in x direction and the horizontal one in y direction for shortening the total length of inset feeder. The optimun feeding position for good impedance matching at two resonant frequencies can be easily found by adjusting the horizontal inset distance. And Various frequency ratios can be simply obtained by the parameters of slot. The measurements for fabricated antenna prototypes are carried out for validation. The measured results show a tunable frequency ratio from 1.25 to 1.88 with the variation of slot parameters. It is worthwhile to point out that the radiation patterns are similar at both bands. and below -20.0 dB of cross polarization level at the E plane.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.1 s.343
• /
• pp.1-8
• /
• 2006

In this paper, we suggested a new antenna structure for the RFID(Radio Frequency IDentification) reader. The conventional RFID reader uses a loop antenna. The central area of a loop antenna shows a low magnetic field strength, especially for the case of a large loop antenna diameter. We proposed a parallel-fed multiple loop antenna. Simulation and measurement were carried out for a single loop antenna, series-fed and parallel-fed multiple loop antennas. Simulation results show that we can obtain 0.40A/m, 0.68A/m, 1.98A/m of magnetic field strengths at the central point of a reader antenna for a single loop antenna, series-fed and parallel-fed multiple loop antennas, respectively. We measured the $79mm{\time}48mm$ tag area averaged induced voltages with applying 20Vp-p same source signals to reader antennas through the resistors. Measured tag area averaged induced voltages at the central point of a reader antennas were 0.76V, 1.45V, 4.04V for a single loop antenna series-fed and parallel-fed multiple loop antennas, respectively. The results show that we can get high induced voltage which can grantee a longer reading distance with a proposed parallel-fed multiple loop antenna.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.316-319
• /
• 2012

In this paper, a novel particle swarm optimization method based on IE3D is used to design a mobile communication Microstrip Patch Antenna. The aim of the thesis is to Design and fabricate an inset fed rectangular Microstrip Antenna and study the effect of antenna dimensions Length (L), Width (W) and substrate parameters relative Dielectric constant (${\varepsilon}r$), substrate thickness on Radiation parameters of Band width. When the antenna was designed, a dual-band, dual-polarized antenna was used to secure the bandwidth and improve performance, and a coaxial probe feeding method so that the phased array of antenna is easy.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.42 no.4
• /
• pp.63-68
• /
• 2005

In this paper, the single coaxial fed and circularly polarized patch antenna for the RFID system in 2.45GHz ISM band has been fabricated. The simulation by HFSS, electro-magnetic field simulator was executed in order to decide the location of feed which is difficult to be analysed. The simulated result has the same tendency as the measured one in the view of input impedance with the variation of feed location. VSWR of fabricated antenna is low($\leq$1.2) even in comparatively high dielectric loss epoxy substrate(FR4), and this value is enough for the application of RFID reader antenna.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.6
• /
• pp.859-867
• /
• 2000

In order to analyze the effect of a cover layer or radome for an antenna, the moment method is applied to the analysis of the circular microstrip patch antenna with dielectric superstrate fed by coaxial probe. The probe feed is modeled as a attachment mode method which can solve more exact analysis. In case of a ideal probe feed modeling, the probe self-impedance as well as the rapidly-varying patch current at the vicinity of the feed point was neglected. But a rigorous probe feed model which overcomes these deficiencies are developed, and used in the analysis of isolated circular patches. Measurements were performed to validate the numerical results. These are good agreement with each other.