DOI QR코드

DOI QR Code

Dual Band Microstrip Antenna with Modified Inset Feeder and a Slot

수정된 Inset 급전선과 단일 슬롯을 이용한 이중대역 마이크로스트립 안테나

  • Rhee, Seung-Yeop (Department of Electronic Communication Engineering, Chunnam University)
  • 이승엽 (전남대학교 전자통신공학과)
  • Received : 2016.05.16
  • Accepted : 2016.08.26
  • Published : 2016.10.07

Abstract

In this paper, we study the characteristics of dual band microstip antenna with modified inset feeder and a single slot. The modified inset feeder consists of the vertical inset feeder placed in x direction and the horizontal one in y direction for shortening the total length of inset feeder. The optimun feeding position for good impedance matching at two resonant frequencies can be easily found by adjusting the horizontal inset distance. And Various frequency ratios can be simply obtained by the parameters of slot. The measurements for fabricated antenna prototypes are carried out for validation. The measured results show a tunable frequency ratio from 1.25 to 1.88 with the variation of slot parameters. It is worthwhile to point out that the radiation patterns are similar at both bands. and below -20.0 dB of cross polarization level at the E plane.

본 논문에서는 수정된 inset 급전 구조와 단일 슬롯이 장하된 이중대역 마이크로스트립 안테나에 대해 연구하였다. 수정된 inset 급전선은 x방향의 수직 inset 급전선과 전체 inset 급전선의 길이를 줄이기 위해 추가된 y방향의 수평 inset 급전선으로 구성된다. 임피던스 정합을 위한 급전선의 전체 길이는 수평 inset 급전선의 길이를 조절함으로써 구현된다. 낮은 공진 주파수와 높은 공진 주파수 간의 비율도 슬롯의 치수를 변화시킴으로써 쉽게 얻을 수 있었다. 또한, 슬롯의 길이와 위치가 안테나 대역폭, 입력 임피던스 등에 미치는 영향을 고찰하였다. 안테나를 제작하여 실험한 결과, 공진 주파수 간의 비율을 1.25에서 1.88까지 변하게 하였다. 그리고 높은 공진 주파수 방사 패턴인 $TM_{30}$은 낮은 공진 주파수 방사패턴인 $TM_{10}$과 거의 같았으며, E평면에서 -20.0 dB 이하의 교차 편파 특성을 보였다. 이러한 결과들로써 본 연구에서 제안된 안테나는 단일 급전 이중 대역 안테나로서 이용될 수 있음을 확인하였다.

Keywords

References

  1. J. R. James, P. S. Hall, Handbook of Microstrip Antennas, Peter Peregrinus, vol. 2, 1989.
  2. R. Garg, P. Bhartia, I. Bahl, and A. Ittipiboon, Microstrip Antenna Design Handbook, Artech House, 2001.
  3. S. Maci, G. B. Gentilli, "Dual-frequency patch antennas", IEE Proc. Microw. Antennas Propag., vol. 39, no. 6, pp. 13-20, 1997.
  4. S. Maci, G. B. Gentilli, P. Piazzesi, and C. Salvador", Dual-band slot-loaded patch antenna", IEE Proc. Microw. Antennas Propag., vol. 142, no. 3, pp. 225-232, 1995. https://doi.org/10.1049/ip-map:19951932
  5. C. Y. Huang, C. W. Ling, and J. S. Kuo, "Dual-band microstrip antenna using caspacitive loading", IEE Proc. Microw. Antennas Propag., vol. 150, no. 6, pp. 401-404, 2003. https://doi.org/10.1049/ip-map:20031015
  6. M. Ali, B. A. Khawaja, M. a. Tarar, and M. Mustaquim, "A dual band U-slot printed antenna array for LTE and WiMAX application", Microwaue Opt. Technol. Lett., vol. 55, no. 12, pp. 2879-2883, 2013. https://doi.org/10.1002/mop.27973
  7. Z. J. Jin, T. Y. Yun, "Compact dual-band slot antenna with capacitor loading", Microwaue Opt. Technol. Lett., vol. 56, no. 7, pp. 1653-1658, 2014. https://doi.org/10.1002/mop.28406
  8. M. Kara, "Formular for the computation of the physical properties of rectangular microstrip antenna elements with various substrate thickness", Microwaue Opt. Technol. Lett., vol. 12, no. 4, pp. 234-239, 1996. https://doi.org/10.1002/(SICI)1098-2760(199607)12:4<234::AID-MOP15>3.0.CO;2-A