• Journal of the Korean Geotechnical Society
• /
• v.18 no.4
• /
• pp.119-126
• /
• 2002

A reliability analysis is performed to investigate the influence of the uncertainty from few in-situ samples and inherent heterogeneity of the ground on the probability of failure for a rock cut slope. The results are compared with those of deterministic slope stability analysis. The random variables used are unit weight of the rock, the angle of potential slope of failure, and cohesion and internal friction angle of joints. It was found that the rock slope in which the factor of safety satisfied the minimum safety factor in the deterministic analysis has high probability of failure in the reliability analysis when the weak geological strata are involved in the cut slope. The probability of failure of rock slope is most sensitive to the mean and standard deviation of cohesion in rock joint among the random soil parameters included in the reliability analysis. Sensitivities of the mean values are larger than those of standard deviations, which means that accurate estimation of the mean for the in-situ geotechnical properties is important.

• Journal of the Korean housing association
• /
• v.24 no.4
• /
• pp.97-107
• /
• 2013

The purpose of this paper is to investigate the planning characteristics of certain cases of elderly welfare housing (hitherto EWH), and analyze any problems by comparing this against the actual needs of potential residents. To this end, 38 distinct housing plans from twelve EWH built after 2005 were examined, and a survey on housing needs was taken by 198 people between 48 and 62 years of age. The results are as follows: Firstly, the most common size found among the 10 cases was 42-66 $m^2$, however larger sizes are becoming more frequent. The most popular response on the survey was one favoring smaller housing options. Secondly, the most common floor plan examined consisted of 1 bedroom + LDK and 2 bedroom + LDK. Likewise, the survey reflected that 1 or 2 bedroom housing was preferred. Thirdly, a floor plan composed of a smaller bedroom and LDK is commonly found in smaller floor plans of EWH. The survey reflected potential residents preferred this same style of floor plan, with a smaller bedroom and LDK set up. However, lower-income participants preferred a single, larger bedroom which also can serve as a living space, to go along with a kitchen/dining room (DK). Fourthly, 2 bedroom housing typically included a single bathroom, however the survey indicated that participants preferred a second bathroom to go along with a second bedroom. Consequently, the planning of elderly welfare housing is to a large extent meeting the demands of its potential residents, however house size and the planning of bathrooms have yet to meet these demands, especially with potential lower-income residents when it comes to housing size and space composition.

• Fire Science and Engineering
• /
• v.29 no.4
• /
• pp.67-72
• /
• 2015

A series of fire tests was conducted to examine the fire characteristics of flaming and smoldering combustion of engineered wood products, which have been widely used for furniture and finishing materials in buildings. The engineered wood products of MDF, plywood, and chipboard were ignited by a radiant cone heater with incident heat flux of $50kW/m^2$. During the fire test, key parameters representing the fire characteristics such as the heat release rate, yield rate of combustion product, and effective heat of combustion were quantified in terms of thickness. The tests show two peak points of HRRPUA due to lateral fire propagation in the initial stage, followed by later fire penetration through the specimen thickness. The mass loss rate of flaming combustion was 5 times higher than that of smoldering combustion, while the CO yield rate of smoldering combustion was 10 times higher than that of flaming combustion. This study can contribute to the understanding of fire behavior of wood combustibles and provide useful data for fire analysis.

• Journal of Korean Society of Transportation
• /
• v.24 no.3 s.89
• /
• pp.51-61
• /
• 2006

Interchanges are passages for vehicle and pedestrians and a gateway to nearby facilities, and a place to stay of vehicle and Pedestrians. Interchange traffic must be able to navigate well for safety and convenience. Traffic safety and efficiency are influenced by the interchange. In this study, relative delays of vehicles are compared by changing traffic interchanges. the volume of traffic, the number of lanes, the rate of left turns vehicle on the interchanges of urban arterial roads. The object of this study is to compare Grade crossing interchange, Diamond interchange. Roundabout interchange. SPUI(Single Point Urban Interchange), Echelon interchange). Echelon interchange. By VISSIM Simulation, this study drew the relative delay value of every scenario and compared the delay value of each vehicle considering construction expenses. Through this comparison study, ideal interchange is dependent on the volume of traffic, the number of lanes, and the rate of left turns.

• Korean Institute of Interior Design Journal
• /
• v.20 no.1
• /
• pp.146-153
• /
• 2011

The purpose of this study was to analyze the type of extended-balcony floor plan which has been reflected as a various forms after making amendment to the apartment extended-balcony legislation on December 2005 and to understand the design tendency of housing unit plan and the characteristic of living space planning by the type of size(pyeong) and extension. The objects of analysis and the plans are 333 example(235 of $84m^2$, 98 of $59m^2$) from the LH corporation competition. The design tendency of balcony space after extension is as follows; First, a type of extension for simple area to increase the area of room adjacent to balcony through balcony extension. Second, a type of functional reinforcement for private room to separate the mixed function followed by strengthening the individual function of the private room. Third, a type of ${\alpha}$-room to play new functions as hobby room, study room, soho-type room with working from home by extending balcony. Fourth, a integrated type to increase flexible efficiency of bed room, living room and kitchen by integrating extended-balcony from the flexible plan. Along with the evaluation of living style through user's environment-behavior research and the counterplan for evacuation space, indoor thermal environment and space for fulfilling the original function of balcony should be proposed in the future study.

• Journal of Korea Multimedia Society
• /
• v.3 no.3
• /
• pp.298-308
• /
• 2000

We present an efficient algorithm for finding the sequence of extreme vortices of a moving regular convex polyhedron of with respect to a fixed plane H.. The algorithm utilizes the spherical Voronoi diagram that results from the outward unit normal vectors nF$_{i}$ 's of faces of P. It is well-known that the Voronoi diagram of n sites in the plane can be computed in 0(nlogn) time, and this bound is optimal. However. exploiting the convexity of P, we are able to construct the spherical Voronoi diagram of nF$_{i}$ ,'s in O(n) time. Using the spherical Voronoi diagram, we show that an extreme vertex problem can be transformed to a spherical point location problem. The extreme vertex problem can be solved in O(logn) time after O(n) time and space preprocessing. Moreover, the sequence of extreme vertices of a moving regular convex polyhedron with respect to H can be found in (equation omitted) time, where m$^{j}$ $_{k}$ (1$\leq$j$\leq$s) is the number of edges of a spherical Voronoi region sreg(equation omitted) such that (equation omitted) gives one or more extreme vertices.

• Journal of Broadcast Engineering
• /
• v.21 no.6
• /
• pp.944-956
• /
• 2016

In this paper, we propose a new hardware architecture to generate computer-generated holograms based on the block based calculation method and implement a VLSI (very large scaled integrated circuit) in ASIC (application specific integrated circuit) environment. The proposed hardware has a structure that can produce a part of a hologram in the unit of a block in parallel. After calculating a block of a hologram by using an object point, the calculation is repeated to all object points and intermediate results from them are accumulated to produce a final block of a hologram. Through this structure, we can make various size of holograms with the optimized memory access in real-time operation. The proposed hardware was implemented in the Hynix 0.18um CMOS technology of Magna chip Inc. and has 876,608 gate counts. It can generate complex holograms unlike the previous researches and stably operate in the clock frequency of 200MHz.

• Korean Journal of Materials Research
• /
• v.11 no.8
• /
• pp.679-684
• /
• 2001

The surface of natural graphite has not only good electrical conductivities and lubrication properties but also has strong hydrophobicity. There are no functional groups and chemical properties on it. It is difficult to join with any other ions and to disperse in aqueous system. In order to increase dispersion ability throughout modification of surface property, it is necessary to let graphite have some function on its surface by the adsorption of surfactant molecules. In this study, using zeta potential adsorbed surfactant molecules(ABDM) on graphite surface and its surface Properties turn hydrophobic into hydrophilic. The dispersing mechanism of graphite particles in aqueous system has been explained using the DLVO theory, It is concluded that the high dispersable graphite suspension of which dispersing stability$(T_{1/2})$ is 44.5 hours at pH 10 and 22.5mV zeta potential can be produced.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.6
• /
• pp.169-174
• /
• 2019

Flexure joints are recently used in the ultra-precision mechanism for a telecommunication mirror stage. Flexure joints have several advantages coming from their monolithic characteristics. They can be used to reduce the size of manipulators or to increase the precision of motion. In our research, 6 dof(degree of freedom) mechanism is suggested for micrometer repeatability using a flexure mechanism. To design the 6-dof motion, the 2-dof planar mechanism are designed and assembled to make the 6-dof motion. To achieve a certain performance, it is necessary to define the performance of mechanism that quantifies the characteristics of flexure joints. This paper addresses the analysis and design of the 6-dof parallel manipulator with a flexure joint using a finite element analysis tool. To obtain experimental result, CCD laser displacement sensor is used for the total displacement and the stiffness for the 6-dof flexure mechanism.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.5
• /
• pp.53-62
• /
• 2004

In this study, an improved post-processing technique for correcting MRI artifact due to the unknown respiratory motion in the imaging plane is presented. Respiratory motion is modeled by a two-Dimensional linear expending-shrinking movement. Assuming that the body tissues are incompressible fluid like materials, the proton density per unit volume of the imaging object is kept constant. According to the introduced model, respiratory motion imposes phase error, non-uniform sampling and amplitude modulation distortions on the acquired MRI data. When the motion parameters are known or can be estimatead a reconstruction algorithm based on biliner superposition method was used to correct the MRI artifact. In the case of motion parameters are unknown, first, the spectrum shift method is applied to find the respiratory fluctuation function, x directional expansion coefficient and x directional expansion center. Next, y directional expansion coefficient and y directional expansion center are estimated by using the minimum energy method. Finally, the validity of this proposed method is shown to be effective by using the simulated motion images.