• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.10a
• /
• pp.309-313
• /
• 2000

In order to meet the industrial requirement, precision grinding with brush tool has been applied. To analyze the brush tool characteristics, several parameters including numbers of brush string installed in a single holder, depth of cut and brush length have been changed. Several data from various source were acquired using AE, acceleration and tool dynamometer during the process. Consistent results revealing certain trend with respect to each process condition were observed.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.1
• /
• pp.20-31
• /
• 1994

FMS(Flesible Manufacturing System), FMX(Flexible Manufacturing Cell)와 같은 유연 생산시스템 뿐만 아니고 공장자동화(FA)의 최하위 단위인 절삭가공 공작기계에 대한 무인화의 실현은 머지않은 장래에 완성될 IMS(Intelligent Manufacturing System)시스템이 구축에 있어서 최대의 걸림돌이 되고 있다. 전통적인 생산시스템에서는 경험을 가진 작업자에 의해 절삭공정이 감시되어지며, 만약 이상이 발생했을 때에는 그 상태에 따른 적절한 조치를 즉시 취할 수 있었다. 그러나 급속도로 연구가 진행되는 무인생산 시스템에서는 이러한 작업자의 역할이 컴퓨터에 의한 자동적인 감시 및 제어 시스템으로 대체되어야 한다. 이러한감시활동 중에서도 공구마모 및 파단의 검출은 효율적인 공구교환정책, 가공물의 품위유지 및 공구와 공작기계의 보호를 위해서 가장 중요한 부분으로 취급되고 있다.

• Journal of the Korean Society for Precision Engineering
• /
• v.5 no.2
• /
• pp.7-14
• /
• 1988

작업물(Work)을 기계에 장입출, 가공에 필요한 공구류의 공급 등이 완전 자동화 된 기존의 사출성형기 Series를 제조하는 FA Systme은, MAP 대응의 FA System 으로 개량되었다. 이 논문은, MAP 대응 새 FA 시스템의 MAP에서 분산.통괄의 역할을 하도록 개발된 Cell controller의 정보관리기능 가운데 하나의 응용으로서 제조공정을 자동적으로 Scheduling 하는데 Expert 시스템(전문가시스템)을 적용한 idea를 소개하는 것이다. 이 idea의 적용 으로 인하여 제조공정의 scheduling 작염은 종래의 주단위로 부터 일일단위의 작업으로 처리가 가능해졌고, 또, 공구수명관리기능의 부가로 무인운전시의 기계의 가공율도 종래보다도 녹일 수가 있었다.

• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.4
• /
• pp.281-286
• /
• 2004

The wear process of end mill is a so complicated process that a more reliable technique is required for the monitoring and controling the tool life and its performance. This research presents a new tool wear monitoring method based on the sound signal generated on the machining. The experiment carried out continuous-side-milling for using the high-speed steel end mill under wet condition. The sound pressure was measured at 0.5m from the cutting zone by a dynamic microphone, and was analyzed at frequency domain. The tooth passing frequency appears as a harmonics form, and end mill wear is related with the first harmonic. It can be concluded from the result that the tool wear is correlate with the intensity of the measured sound at tooth passing frequency estimation of end mill wear using sound is possible through frequency analysis at tooth passing frequency under the given circumstances.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.12
• /
• pp.652-658
• /
• 2016

In this paper, the theoretical research and simulation using the Finite Element Method (FEM) to design and form a micro-pattern for an ultrasonic horn is described. The present method is based on an initial design estimate obtained by FEM analysis. The natural and resonant frequencies required for the ultrasonic tool horn used for forming the fine pattern were predicted by finite element analysis. FEM analysis using ANSYS S/W was used to predict the resonant frequency for the optimum technical design of the ultrasonic horn vibration mode shape. When electrical power is supplied to the ultrasonic transducer, it is converted into mechanical movement energy, leading to vibration. The RFID TAG becomes the pattern formed on the insulating sheet by using the longitudinal vibration energy of the ultrasonic tool horn. The FEM analysis result is then incorporated into the optimal design and manufacturing of the ultrasonic tool horn.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.256-256
• /
• 2004

Micro/Meso 기계적 가공은 기존 MEMS 공정에서 제작할 수 없었던 높은 세장비(aspect ratio)를 가지는 제품을 가공할 수 있을 뿐만 아니라 보다 높은 가공 정밀도를 획득할 수 있다. 따라서, 미소 부품에 대한 마이크로/매소 단위의 미세 절삭 가공을 위해서는 공간적 측면과 에너지 소비, 정밀도 측면에서 효율적인 시스템을 구성하기 위해서 마이크로 머시닝 전용 기계가 요구된다. 이에 본 연구에서는 '마이크로 팩토리' 의 기본 공작기계인 마이크로 선반을 개발하여 초정밀 미소 절삭에 대한 연구를 진행 중에 있다.(중략)

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1996.04a
• /
• pp.352-357
• /
• 1996

특징형상 데이터는 공정설계의 입력 정보로 사용되며, 부품 서술 데이터, 기하학적 데이터, 가공 기술적 데이터로 분류할 수 있다. 또한 공정순서및 작업순서 결정에서 선행관계는 반드시 고려하여 위배되지 않도록 해야하는 중요한 요소이다. 본 연구에서는 작업순서 결정시 만족해야하는 선행관계를 기하형상에 의한 선행관계, 단위 특징형상의 작업내용들간의 선행관계, 가공 경험에 의한 선행관계 등으로 분류/정의하였고, 특징형상 데이터와 가공지식을 이용하여 분류된 선행관계를 자동으로 추출하는 방법을 제안하였다. 그리고 추출한 선행관계를, 공구 교환횟수를 최소로 하는 작업순서 결정 알고리즘에 적용한 사례를 정리하였다.

• Korean Journal of Plant Resources
• /
• v.20 no.2
• /
• pp.193-200
• /
• 2007

Pollen grains of seven taxa on the family Pyrolaceae, known to be distributed in Korea (Pyrola dahurica(Andreses) Kom., P. incarnata (DC.) Fisch. ex Kom., P. japonica Klenze ex Alefeld, P. minor L., P. renifolia Max., Orthilia secunda (L.) House, Chimaphila japonica Miq.), were examined by the light and the scanning electron microscope in order to evaluate their taxonomic significances. The pollen units of genus Pyrola, Orthilia, Chimaphila were tetrad, monad, polyad respectively. This characteristics was good character for delimiting the genus, and Orthilia secunda (L.) House was more proper scientific name than Pyrola secunda L. based upon this character. Pollen size, tricolporate length, surface sculpturing pattern were different slightly among the treated taxa, and surface sculpturing patterns of Pyrola dahurica, P. incarnate, P. renifolia, Chimaphiza japonica were different from previous reports. Evolutionary trends of pollen grains in Pyrolaceae were inferred from the pollen units and aperture shapes.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.4D
• /
• pp.595-601
• /
• 2011

There is currently applied to the unit cost per a distance (KRW/km) for estimating the conceptual cost of civil work on basic planning stage of high speed railroad. This unit cost is an arithmetic average value based on historical data, which could be in big error. It also is difficult to explain the deficiency comparing the estimated cost derived from next basic design stage. This study provides the conceptual estimation model using by the parametric method and regression analysis. Independent variables are the distance and the geological materials (earth, weathered rock, soft-rock, hard-rock), extracting from the actual data to 36 contracts. The deviation between the unit costs estimated using the developed model and the actual cost data is presented in the range from -0.4% to +31%. This range is acceptable compared the typical range "-30% to + 50%". This model will improve the accuracy of existing method and be expected to contribute to effective total cost management and the economic aspects, reduce the financial expenditure.

• Korean Journal of Plant Resources
• /
• v.16 no.1
• /
• pp.89-98
• /
• 2003

Pollens of six taxa in the genus Atractytis L. confused with Atractylodes DC. were investigated by the light and the scanning electron microscope. Pollen grains of six taxa in this genus were monads, 46.5-66.7$\mu\textrm{m}$ in length of polar axis, 43.6-60.47$\mu\textrm{m}$ in equatorial width. Aperture was tri-colporate, 19.6-29.1 $\mu\textrm{m}$ in colpus length,7.3-11.0$\mu\textrm{m}$ in colpus width and 6.4-10.6$\mu\textrm{m}$ in porus diameter. The exine was composed of three layers(foot layer, columellne, tectum), and 5.2-8.3 $\mu\textrm{m}$ in thickness. The surface sculpturing pattern was echinate, the spines were 1.4-5.8$\mu\textrm{m}$ in length and 6-33 per 20$\mu\textrm{m}$$^2$ in distribution numbers over the surface. Atractylis L. was not distinguished from Atractylodes DC. by pollen morphology, especially the pollens of Atractylis arabica, A. aristata, A. carduus, A. microcephala were very similar to that of Atractylodes. But its taxonomic significance was different, the taxa of Atractylodes DC. were divided into 2 types by only pollen size, but the treated taxa in this study were divided into various types by pollen size, shape of equatorial view, surface sculpturing and spine size. The characteristics of spine size and shape of equatorial view in A. cancellata and A. prolifera were very useful for consideration of evolutionary trends in this genus.