• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.625-632
• /
• 2018

This study was done to reduce total energy demand based on resource shortage problems and to provide improvement points for more efficient adjustment of the high insulation standards for saving energy in Korea. The demand sensitivity was fully considered by varying the slope of each building. The energy performance of the building was maximized by the introduction of outdoor air at night. A final low-energy building model was developed with the two measures combined, and the short-term operation of the night-fuzzy ventilation system was simulated. The result showed a reduction of about 6 to 7 percent compared to the base model. The results could have many implications in terms of the need to conduct demand sensitivity analyses in architectural design.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.7 no.1
• /
• pp.10-17
• /
• 2003

The steady and transient thermal and flow analysis for liquid helium using for the pressurization of liquid rocket propellant tanks have been conducted numerically. The required inner diameter of helium channel that satisfy the design mass flow rate and velocity, through the steady state analyses for various thermal conditions at the wall, is determined and it is found that due to the sign of Joule-Thomson coefficient of helium, the temperature of helium increase monotonically for adiabatic wall condition. The temporal behavior of helium temperature, density, velocity are also investigated under the existence of local heat inflow on the wall.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.5
• /
• pp.452-458
• /
• 2011

Bamboo is representing environmentally friendly building finishing materials as proven in the former researches. The purpose of this study is to evaluate the application properties of cementitious materials modified with bamboo charcoal as building finish materials. Flow test in fresh condition was conducted to assess the workability. Compressive and bending strength were measured after harding. As the thermal properties, thermal conductivity and density were measured. The properties were surpassing over them in case of using the pine charcoal in every tests. The thermal conductivity of them increased with the modified ratio. After the modified ratio 50%, the thermal conductivity decreased. Insolation and absorption performance is due to the lower density by modification of bamboo charcoal.

• Journal of the Korean GEO-environmental Society
• /
• v.18 no.12
• /
• pp.5-11
• /
• 2017

The 19 mm-sized aggregate was produced by melting vinyl waste (waste polyethylene film) generated from vinyl greenhouses in rural areas. It was mixed with As'cone at various weight ratios, and then insulation effect test, tension test after repeated freezing and thawing, ice pull-out strength test and field density test were conducted for the mixtures. These results demonstrated that as the mixing ratio of polyethylene aggregate increased, the insulation effect increased, due to the many pore spaces that existed in the polyethylene aggregate. After repeatedly freezing and thawing As'cone, the tensile strength significantly increased at 2.5% of the polyethylene aggregate content rather than 0% of polyethylene aggregate content but it also slightly decreased at 5% and 10% of polyethylene aggregate content in comparison to 2.5% of its polyethylene aggregate content. As'cone added with polyethylene aggregate by 2.5% resulted in lower ice pull-out strength than that of normal As'cone. As a result of the porosity test for the samples taken at the site, porosity of the As'cone, which added polyethylene aggregate, was smaller than that of the general As'cone.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.5
• /
• pp.543-551
• /
• 2015

Polyurethane Foam(PUF), a outstanding thermal insulation material, is used for various structures as being composed with other materials. These days, PUF composed with glass fiber, Reinforced PUF(R-PUF), is used for a insulation system of LNG Carrier and performs function of not only the thermal insulation but also a structural member for compressive loads like a sloshing load. As PUF is a porous material made by mixing and foaming, mechanical properties depend on volume fraction of voids which is a dominant parameter on density. Thus, In this study, density is considered as the effect parameter on mechanical properties of Polyurethane Foam, and mechanical behavior for compression of the material is described by using modified Gurson damage model.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.1 no.3
• /
• pp.225-232
• /
• 2013

The inorganic insulating material was fabricated with quartzite, ordinary portland cement(OPC), lime, anhydrous gypsum and foaming agent by hydrothermal reaction. The inorganic insulating material was fabricated by using autoclave chamber under high-temperature and high-pressure. The inorganic insulating material is a porous lightweight concrete. Because of its porous structure, properties of inorganic insulating material were light-weight and high-heat insulation property. Properties of fabricated inorganic insulating material were $0.26g/cm^3$ in specific gravity, 0.4MPa in compressive strength and 0.064W/mK in thermal conductivity. In this study, the inorganic insulating material was fabricated and analyzed at different size of quartzite/OPC, various foaming reagent and functional additives to improve the properties. Consequently, polydimethylsiloxane can improve density and thermal conductivity. Especially, polydimethylsiloxane showed excellent improvement in compressive strength.

• Journal of the Korean Wood Science and Technology
• /
• v.19 no.3
• /
• pp.77-85
• /
• 1991

은행나무 지재(枝材)에 발달(發達)하여 있는 압축이상재(壓縮異常材)와 대응재(對應材)의 해부학적(解剖學的) 특성(特性) 차이(差異)를 조직(組織) 및 그 구성요소(構成要素)의 크기 면에서 서로 검토(檢討) 비교(比較)하였다. 조직적(組織的)인 특성(特性)으로는 압축이상재(壓縮異常材)가 연륜폭(年輪幅), 횡단면상(橫斷面上) 가도관(假導官) 형상(形狀) 및 방사조직(放射組織) 비례상태(比例狀態), 세포간극(細胞間隙), 가도관(假導官) 선단(先端)의 굴곡(屈曲), 나선열(螺旋裂) 및 접선단면상(接線斷面上)의 방사조직(放射組織) 형상(形狀) 면에서 대응재(對應材)와 차이(差異)를 나타냈으며 구성요소(構成要素)의 크기에 있어서는 가도관(假導官)의 벽후(壁厚) 및 접선직경(接線直徑), 단열(單列) 방사조직(放射組織)의 높이, 이열방사조직(二列放射組織)의 수(數) 및 방사조직(放射組織) 밀도(密度) 면에서 압축이상재(壓縮異常材)가 대응재(對應材)와 차이(差異)를 나타내는 것으로 여겨졌다.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.7 no.4 s.19
• /
• pp.100-106
• /
• 2004

The effects of adiabatic flame temperature and mass flux on deuterium fluoride(DF) chemical laser performance were investigated. The power flux and specific power, which are important parameters containing the information of scaling effects of laser device magnitude, and chemical efficiency were selected as a judging parameter of DF laser performance. For the specific power, it was decreased by the increase of power flux of DF laser. Higher the adiabatic flame temperature of atomic fluorine generator, higher the chemical efficiency of DF laser was changed. It seems that the mass flux effect on the chemical efficiency is not remarkable.

• Journal of the Korean Society of Safety
• /
• v.25 no.1
• /
• pp.38-43
• /
• 2010

The smoke density and noxious gas for phenol foam and polyurethane foam were measured according to test methods in ASTM E 662 and KS F 2271. It was observed that phenol foam had the possibility of application for sandwich panel and board compared with polyurethane foam. In the experimental results, phenol foam showed comparatively excellent property than polyurethane foam in smoke density and noxious gas. The polyurethane foam showed comparatively high smoke density and didn't meet the evaluation standard of noxious gas in KS F 2271. From the experimental results of smoke density and noxious gas, it can be said that phenol foam has both comparatively good safety and high possibility of application than polyurethane foam in the building fire of sandwich panel structure because of lower smoke density and noxious gas.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.941-946
• /
• 2005

Kinds of Sound & Thermal Insulator are being used for materials of railroad vehicles as a barrier of beat and noise. Glass Wool, PE foam, PP foam are such kinds of materials. In case of fire, it shows various combustion properties. In this study, we compared the Smoke Density of the Rubber Foam Insulator by test between Cone-Calorimeter and Smoke Density-Chamber. The results showed that the Rubber Foam Insulator had an important role in the insulator thickness and the test method, We forecast the smoke density by test between Cone-Calorimeter and Smoke Density-Chamber.