• Proceedings of the KWS Conference
• /
• 2001.10a
• /
• pp.33-36
• /
• 2001

• Journal of Ocean Engineering and Technology
• /
• v.16 no.2
• /
• pp.53-59
• /
• 2002

This paper shows the experimental results controlling the height of surface and back bead in GMAW by analyzing the unexpected gaps between base metals produced in welding and by controlling welding velocity due to the variation of the gap between base metals in thin-plate welding. The back bead behavior and burn-through in I-type butt joint $CO_2$ welding of thin mild steel are analyzed in the views of short circuit time ratio and short circuit frequency. It is shown through experimental consideration that the short circuit time ratio method is more reasonable than the short circuit frequency method in analyzing the formulation of back bead under changing the gap between base metals. Based on the these results, welding manipulator is designed so as to satisfy the bead height control in real time by measuring the short circuit time ratio. To show the effectiveness of the developed bead formulation control system, the experiment is implemented under two welding conditions such as increasing gap from 0mm to 0.8mm and gradually increasing gap from 0mm to 1.2mm. The experimental results show that the bead formulation can be controlled uniformly in spite of the variation of the gap between base metals.

• Proceedings of the KWS Conference
• /
• 1998.05a
• /
• pp.176-179
• /
• 1998

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.5
• /
• pp.389-396
• /
• 2003

This paper describes a novel ac/dc power converter suitable for frequent output short-circuit faults. The output dc power of the proposed converter can be disconnected from the load within several hundred microseconds at the instant of short-circuit fault. The rising time of the dc load voltage is as small as several hundred microseconds, and there Is no overshoot of the dc voltage because the dc output fillet capacitors stay at a undischarged state. The proposed converter has the characteristics of a simplified structure, reduced cost, weight, and volume compared to the conventional power supplies for frequent output short-circuit. Analysis, simulations, and experiments are carried out to investigate the operation and usefulness of the proposed scheme.

• Proceedings of the KIPE Conference
• /
• 2018.11a
• /
• pp.169-170
• /
• 2018

전압형 인버터의 경우 IGBT와 같은 전력용 반도체 소자를 사용하여 스위칭을 하게 되는데 이상적으로 on, off 되지 않기 때문에 시간 지연이 발생하게 되고, 공정 상의 이유로 기생 커패시터가 생성되어 사용자가 원하는 시간에 스위치의 on, off가 일어나지 않게 된다. 또한, 전압형 인버터에서는 스위칭 시에 윗단과 아랫단의 스위치가 단락되는 현상을 막기 위하여 데드타임이라는 여유 시간을 주게 되는데 이러한 요인들이 인버터의 비선형성을 일으키게 된다. 인버터의 비선형성은 사용자가 플랜트로 보내고자 하는 전압과 플랜트가 받는 전압 사이에 오차를 발생시키게 된다. 본 논문에서는 이러한 전압 왜곡을 보상하기 위하여 인버터로 전압을 직접 인가하는 방식을 통해서 전압 왜곡을 계산하고 실험적으로 얻어낸 정확한 데이터를 기반으로 수식에 대입하여 전압 보상을 진행한다. 본 논문에서는 측정 시퀀스를 하나의 알고리즘으로 구현하여 짧은 시간 내에 정확히 측정해 낼 수 있는 방식을 제안한다.

• Journal of Welding and Joining
• /
• v.21 no.1
• /
• pp.48-53
• /
• 2003

The object of this study is to examine the effect of short circuit time ratio (SCTR) and current rise delay time (Td) on the spatter generation at low and medium current range in $CO_2$ welding. The spatter was evaluated by the weight generated in the welding of bead-on-plate for 30 seconds (3 times). Td was varied by order of 0, 0.4, 0.8 and 1.2 msec. At each Td, the short circuit time ratio was varied by the output voltage of the welding power source. In the low current range, it was found that the optimum SCTR was 20~25%, and the minimum spatter generation weight was obtained in the case of Td=0.4msec and SCTR=22% even though the remarkable difference was not showed by the application of Td. In the medium current range, it was confirmed that the arc was stable though the SCTR was increased from 20% to 40% by the control of current wave. Spatter generation weight depended on the variation of Td, and the lowest value of spatter generation weight occurred at Td=0.8~1.2msec.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.4
• /
• pp.285-292
• /
• 2009

In this paper, when ac motors are driven by the diode rectifier/Z-source inverter system, the common-mode voltages of system are analyzed in details under both the shoot-through state and non-shoot-through state through equivalent circuits. Then a modified space vector modulation strategy is suggested for attenuating the negative common-mode voltage by eliminating the zero voltage vector, and also controlling the shoot-through time. Through the simulation studies with PSIM and experiments with 32-bit DSP, it is verified that the negative common-mode voltage can be reduced by more than 50%.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.701-701
• /
• 2013

표면조직화는 입사되는 빛의 반사를 줄이고 태양전지 내부에서 빛의 이동거리를 길게하여 효율을 향상시키는 중요한 요소가 된다. 결정질 실리콘 표면 조직화에서 일반적으로 알카리 습식 식각이 많이 사용되며 이 식각 방법으로 반사도를 400~1000 nm의 파장에서 평균 11%까지 줄일 수 있다. 본 논문에서는 빛의 반사를 더 줄여 단락전류를 향상 시키기 위해 기존 NaOH를 이용한 표면 조직화를 수행한 후에 반응성 이온 식각 공정을 적용하는 2단계 표면 조직화 공정을 최적화 하였다. 먼저 NaOH 2%, IPA 7.5%용액에서 $80^{\circ}C$ 유지하면서 35분간 식각을 한 후에 ICP 장치에서 SF6/O2 비율 1:1, 공정 압력 25 mTorr, 시간 200 s로 고정하고 RF 파워를 25~200 W로 변화를 주면서 실험 하였다. 그 결과 마이크로 크기의 피라미드 위에 나노 크기의 피라미드를 형성할 수 있었으며 400~1,000 nm 파장에서 평균 4.96%까지 반사도를 낮출 수 있었다. 기존 알카리 식각 공정에 비해 반사도가 많이 낮아지게 되어 입사되는 빛의 양이 증가함으로서 단락전류가 증가하고 효율이 향상될 것으로 기대된다.

• Journal of Chest Surgery
• /
• v.31 no.8
• /
• pp.749-755
• /
• 1998

Background: Twelve patients with acyanotic tetralogy of Fallot(TOF), characterized by the combination of a malaligned ventricular septal defect(VSD) and infundibular pulmonic stenosis with the clinical finding of acyanosis at rest, underwent surgical correction between January 1988 and July 1997. Materials and methods: 9.92% of patients with the diagnosis of TOF were acyanotic TOF in the same period. Ages ranged from 12 to 42 months(mean 25.2 months). 2D-echocardiographic studies, cardiac catheterization, and angiocardiograms were performed in all patients before operation. The preoperative mean systemic arterial oxygen saturation was 93.5%. According to the 2D-echocardiographic analysis, there was Lt-to-Rt shunt through VSD in 4 patients, bidirectional shunt in 2 patients, and no shunt in 6 patients. Results: The preoperative mean right ventricle to pulmonary artery(RV-PA) pressure gradients were 52.3 mmHg on 2D- echocardiogram and 48.4 mmHg on cardiac catheterization. The repair of ventricular septal defect was performed through a right atrial approach and the hypertrophic infundibular muscle bundles were resected by the transatrial and transpulmonary approach. Six patients(50%) received a transannular patch. The mean cardiopulmonary bypass time was 135.0 minutes, and the aortic crossclamp time was 87.8 minutes. Postoperative complications included bleeding necessitating reentry in one and chylothorax in one. No patient died after operation and there were no late deaths. Postoperative 2D-echocardiograms revealed tiny patch dehiscence in 5 cases and a moderate RV-PA pressure gradients(mean 15.3 mmHg). All patients were in New York Heart Association functional class 1 after operation. Conclusions: acyanotic TOF is the uncommon form of TOF, and acyanotic TOF can be repaired with a good outcome.

• Journal of Chest Surgery
• /
• v.29 no.8
• /
• pp.816-821
• /
• 1996

Lung transplantation is the established treatment for the end stage lung disedse find preservation of the organ is a major obstacle In performing lung transplantation. For solving this problem, we evaluated the histopathologic changes for various preservation solutions. Male mongrel dogs of similar size and weight (15∼20 kg) were used. The dog lungs were flushed with 4fl normal saline(group 1 'n:5): Modified Euro-Collins solution(group 2 n:5) and University of Wisconsin solution (group 3 : n=6), 60m11kg through a catheter placed in the main pulmonary artery aft r flushing of PGE 1 (20ng1kg). The lungs were preserved for 60 hours and measured dry and wet weights. Histologic specimens were taken every 6 hours and %toed for light microscopic evaluation. The edema ratio of the lungs peaked in 12 hours although there was no difference between the groups. Histologically, alveolar septal changes developed in one case (20%) after 1 hour preservation with normal saline. In case of the University of Wisconsin solution, the alveolar septal distortions and swellings were seen in 1 cases (20%) after 6 hours preservation compared with 3 cases (60%) after 6 hours preservation with Modified Euro-Collins solution. Changes of the pneumocytes were observed after 24 hours preser- vation in group 1, after 48 hours preservation in group 2 and after 60 hours preservation in group 3. We conclude that University of Wisconsin solution might have a superior preservation effect compare to normal saline and Modified Euro-Collins solutions.