• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.514-515
• /
• 2012

본 논문에서는 인버터 모드 기능을 가지는 Quasi Z-소스 AC-AC 컨버터를 제안하였다. 제안된 시스템은 Quasi Z-소스 AC-AC 컨버터의 암단락 스위치 단에 PI제어가 된 양 방향 벅-부스트 컨버터를 연결하였다. 양방향 벅-부스트 컨버터에서 직류를 입력하는 모드를 인버터 모드라고 하고, 양방향 벅-부스트 컨버터에서 직류를 출력하는 모드는 컨버터 모드라고 한다. PSIM시뮬레이션에 의하여 인버터 모드 동작 시에는 직류 12V를 암단락 스위치단에 입력하여 AC_Load에 교류 전압를 출력하고, 컨버터 모드 동작 시에는 AC_Load에 교류 전압를 출력함과 동시에 암단락 스위치단에 연결된 DC_Load에 직류 전압을 일정하게 출력할 수 있음을 확인하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.497-499
• /
• 2013

In this paper, electrical lengths and impedances of a dual-mode resonator are calculated by using the transfer function of a dual-mode resonator by realizing the short-stub. The electrical length of transmission-line for a resonator is function of the frequency and the electrical length of stub is defined by the frequency and impedances of line and stub. Also, the inverter value of a bandpass filter using the dual-mode resonator is calculated. The effect of stub's impedance for inverter is very small. And, as the impedance of line is decreasing, the inverter value is increasing and as the bandwidth is increasing, the inverter value is increasing.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.4
• /
• pp.285-292
• /
• 2009

In this paper, when ac motors are driven by the diode rectifier/Z-source inverter system, the common-mode voltages of system are analyzed in details under both the shoot-through state and non-shoot-through state through equivalent circuits. Then a modified space vector modulation strategy is suggested for attenuating the negative common-mode voltage by eliminating the zero voltage vector, and also controlling the shoot-through time. Through the simulation studies with PSIM and experiments with 32-bit DSP, it is verified that the negative common-mode voltage can be reduced by more than 50%.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.9
• /
• pp.814-820
• /
• 2015

In this paper, A high selective dual-band bandpass filter was proposed using a dual-mode ring resonator with two short-circuited stubs. For dual-mode resonance, the ring resonator is directly connected with non-orthogonal feed-lines via coupling capacitors. Two short-circuited stubs which are unequal lengths are simultaneously placed at two corners along the two symmetry plane of the ring resonator in order to obtain dual-band responses. Because the feeding angle perturbated ring resonator of the proposed dual-band bandpass filter has the symmetrical structure, Even/Odd mode analysis can be well applied to extract the scattering parameters and transmission zero frequencies. The proposed dual-band bandpass filter was designed and fabricated for WLAN(Wireless Local Area Network) application of IEEE 802.11n standard. The measured results showed a good agreement with the simulation results, and it should be well applied not only for WLAN applications but also for any other communication systems.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.2
• /
• pp.327-332
• /
• 2018

In this paper, the value of inverter and the characteristics of the dual-mode resonator with the shunt-stub are analyzed and calculated. The value of inverter is function of the impedances and electrical lengths of the resonator and shunt-stub. According to suggested equation, the value of inverter is increased for the square root function. And the value of inverter is decreased as higher impedance of resonator and higher ripple. The bandwidth of the filter is increased as the ripple and the impedance ratio. Also, the center frequency of the filter is shifted as designed impedance. In order to show the designed method, the filter with the resonator's and stub's impedances of $70.7{\Omega}$, and $56.56{\Omega}$, respectively, is suggested by example.

• Journal of Welding and Joining
• /
• v.9 no.3
• /
• pp.34-40
• /
• 1991

An automatic welding system was constructed with a personal computer to capture the welding data in addition to vision seam tracking for the gas metal arc welding process. The monitoring of welding signals is composed of the acquisition of welding voltage and current, obtained by using two differential amplifiers and A/D converters, and processing of the measured data. Using interrupt handing circuit for time sharing, two jobs of seam tracking and monitoring were performed at the required sampling time. Relations between welding signals and various welding circumstances were analyzed from the experimental results.

• Journal of Welding and Joining
• /
• v.15 no.3
• /
• pp.47-55
• /
• 1997

Dynamic characteristics of the short circuit mode are investigated using the Volume of Fluid (VOF) method. When the initial molten drop volume, contact area and wire feed rate are given, rate change of the molten bridge profiles, pressure and velocity distributions are predicted. The electromagnetic force with proper boundary conditions are included in the formulation to consider the effects of welding current. It is found that the molten metal is transferred to the weld pool mainly due to the pressure difference caused by the curvatures in the initial stage, and electromagnetic force becomes dominant factor in the final stage of short circuit transfer. Necking occurs at the contact position between the molten drop and weld pool, and the initial molten drop volume and welding current have significant effects on break-up time.

• Proceedings of the KWS Conference
• /
• 1999.10a
• /
• pp.74-77
• /
• 1999

• Proceedings of the KIEE Conference
• /
• 2005.11a
• /
• pp.74-76
• /
• 2005

수평형 에미터 스위치트 사이리스터(Lateral Emitter Switched Thyristor, LEST)의 고전압 전류 포화 특성을 위한 새로운 보호회로가 제안하였으며 성공적으로 제작 및 측정하였다. LEST의 부유(浮遊, floating) n+ 전압이 보호 MOSFET의 문턱 전압 보다 커지면 보호 회로는 LEST의 동작 모드를 regenerative 상태에서 non-regerative 상태로 전환시킨다. 일반적인 LEST의 전압 전류 포화 특성이 17 V로 제한되는 것에 비해 제안된 회로와 결합된 LEST는 200V 이상의 고전압 전류 포화 특성을 보였으며, Hard Switching Fault(HSF) 단락 회로 상황에서도 $10{\mu}s$ 이상 견디는 단락 회로 유지 능력을 보였다.

• Proceedings of the KIEE Conference
• /
• 2007.04c
• /
• pp.77-79
• /
• 2007

본 논문에서는 변압기 권선의 기계진동모드인 공진주파수를 Transfer Matrix Method를 이용하여 계산하였고. 이를 기계구조 프로그램인 ANSYS를 이용하여 증명 하였다. 본 연구에서 사용된 방법들은 단락시 발생되는 변압기 권선진동을 연구할 때 유용하게 활용할 수 있을 것이다.