• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.13 no.5
• /
• pp.103-109
• /
• 2004

This paper presents a fairing method for reverse engineering of a free-formed surface. Utilizing measured data points, reverse engineering is a useful method to construct a CAD model from physical model. Measured data points should be faired since raw data may have outliers. A fairing algorithm of polynomial regression model generates smooth curves of approximation in this paper. The faired curves are utilized to construct a free-formed surface. For a verifying example, an impeller blade is digitized with a CMM to collect raw data on the surfacce and a CAD model is constructed. This research produces impeller blades with 5-axis machining center through the CAD model and compares them with a physical model. As a result the produced surface modeled with the fairing method gives less error than that without the fairing.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.20 no.2
• /
• pp.69-74
• /
• 2016

Purpose Using a regression formula of the trendline near the coefficient of determination (R2) "1" by substituting the dependent variable of the standard curve to calculate the values of the independent variable. To determine the suitability of a regression equation by comparing the difference between the independent variables of the standard curve and the predicted independent variables. Materials and Methods Perkin Elmer Gamma-Counter machine was used for Standard curve of regression methods. TSH. TG-Ag (Thyroglobulin Antigen), Insulin that used materials and method test to compare the result from the Excel trendline of the regression formula. Results Each of the value of coefficient of determination ($R^2$) and Trendline $R^2=1$, Polynomial Trendline for TSH, $R^2=1$, Polynomial Trendline for TG-Ag, $R^2=0.9994$, Polynomial Trendline for Insulin. Conclusion We confirmed that IRMA immune method is found to the nearest trends elected a standard curve using polynomial trendline. The independent variables to predict the trend by using a polynomial trendline formula containing the error was a limitation.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.5
• /
• pp.273-278
• /
• 2019

In this study, a new simple method for the estimation of hyperelastic material properties by indentation tests is proposed. Among hyperelastic material models, the Yeoh model with three material properties ($C_{10}$, $C_{20}$, $C_{30}$) is adopted to describe the strain energy density in terms of strain invariants. Finite element simulations of the spherical indentation of hyperelastic materials of the Yeoh model with different material properties are performed to establish a database of indentation force-displacement curves. The indentation force-displacement curves are fitted by cubic polynomials, which are approximated as a product of third-order polynomials of ($C_{10}$, $C_{20}$, $C_{30}$). A regression analysis is conducted to determine the coefficients of the equations for the indentation force-displacement curve approximations. A regression equation is used to estimate the hyperelastic material properties. The present method is verified by comparing the estimated material properties with true values.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.10a
• /
• pp.310-312
• /
• 2001

샘플링되지 않은 불확실한 이동객체의 위치값을 추정하기 위한 기존의 연구방범 중 가장 보편적으로 사용하고 있는 방법은 선형 보간법이다. 선형 보간법을 사용할 경우 샘플링 구간은 좁게하여 오차를 줄일 수 있고 계산 시간을 단축할 수 있지만, 연속적인 이동객체의 경로는 직선이라기 보다는 곡선으로 나타내어지므로 샘플링되지 않은 이동객체의 위치값에 대해 불확실한 위치정보를 사용자에게 반환하게 된다. 따라서 이 논문에서는 샘플링된 이동객체의 위치값에 오차가 없다는 가정하에서 모든 위치점을 지나는 보간 다항식을 구해서 처리하는 선형 보간법 대신 이동객체의 위치값 자체의 오차범위까지 고려하는 다항회귀모형(polynomial regression model)을 이용한 이동객체의 불확실한 이동위치 추정방법을 제시한다. 다항회지모형은 이용할 경우 선형 보간법 보다 추정된 위치값에 대한 오차를 줄일 수 있으며, 이동객체의 과거 및 미래 위치값을 사용자에게 반환해 줄 수 있는 장점을 가진다.

• Water for future
• /
• v.18 no.1
• /
• pp.85-94
• /
• 1985

A method is developed for the separation of the major base flow in a river hydrograph combining the numerical techniques and the empirical methods. The linearized Boussinesq equation and the storage function are used to obtain the base flow recession. The shape of base flow curve made by the recharge of the groundwater table aquifer resulting from rainfall in determined by the Singh and Stall's graphical method, and the continuous from for the curve is approximated by the multiple and polynomial regression. this procedure was successfully tested for the separation of base flow and the establishment of hydrograph in a natural watershed. It was found that the direct numerical method applied to the homogeneous linear second order ordinary differential equation system is not suited to obtain the recession curve, and the case that the loss is generated in the partially penetrating stream can not be solved by the method of this study.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.105-108
• /
• 1999

TTS(Text-To-Speech) 시스템 합성음성의 자연감을 개선하기 위해 하나의 언어에 대해 존재하는 운율 법칙을 정확히 구현해야 한다. 존재하는 운율 법칙을 추출하기 위해서는 방대한 분량의 언어 자료 구축이 필요하다. 그러나 이 방법은 존재하는 운율 현상이 포함된 언어자료에 대해 완벽한 운율을 파악할 수 없으므로 합성음성의 질을 좋게 할 수 없다. 본 논문은 한국어 음성의 운율을 학습하기 위해 2개의 인공 신경망을 제안한다. 하나의 신경망으로 문장의 각 음소에 대한 피치 변화를 학습시키는 것이며, 다른 하나는 에너지 변화를 학습하도록 하였다. 신경망은 BP 신경망을 이용하며 11개의 음소를 나타내기 위해 11개의 입력과, 중간 음소의 피치와 에너지 변화곡선을 근사하는 다항식 계수를 출력하도록 하였다. 신경망시스템의 학습과 평가에 앞서, 음성학적 균형잡힌 고립단어를 기반으로 의미있는 문장을 구성하였다. 문장을 남자 화자로 하여금 읽게 하고 녹음하여 음성 DB를 구축하였다. 음성 DB에 대해 각 음소의 운율 정보를 수집하여 신경망에 맞는 목표 패턴과 훈련 패턴을 작성하였다. 이 목표 패턴은 회귀분석을 통한 추세선을 이용해 피치와 에너지에 대한 2차 다항식계수로 구성하였다. 본 논문은 목표패턴에 맞는 신경망을 학습시켜 좋은 결과를 얻었다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.5
• /
• pp.447-454
• /
• 2017

Using two large coast guard ships at sea, we created four encounter situations ($000^{\circ}$, $045^{\circ}$, $090^{\circ}$, $135^{\circ}$) with high possibility of collision, from 3 NM up to 0.25 NM. As relative distance was gradually decreased, the subjects were measured at 0.25 NM intervals and perceived ship collision risk (PSCR) was determined by looking at the opponent ship. Characteristics were statistically analyzed using the obtained data. The purpose of this study was to analyze the characteristics of collision risk values obtained from twelve intervals, from 3 NM to 0.25 NM relative to encounter situations by curve fitting with appropriate polynomials, to determine the distance from which the change in perceived collision risk is greatest. As a result, an optimal regression equation for each distance interval was derived from each analysis direction. The greatest variation in average collision risk value was over the range 1.25 ~ 1 NM, and the collision risk value was largest at 1 NM. The maximum change in perceived collision risk was at 1 NM. These results can contribute to preventive guidelines to minimize human error in close proximity situations with a high probability of ship collision.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.8
• /
• pp.557-565
• /
• 2012

In this research, it was analyzed that the effect of the non-point source pollution that occurs in the lower reaches of the livestock area. The analysis on the hydro- and polluto-graphs showed that the concentration of pollution gradually increased as the flow rate increased and, after reaching the peak flow rate, the flow rate dropped drastically. For Event Mean Concentration (EMC), in the lower reaches of livestock area, TSS EMC was 146.80~424.95 mg/L, COD EMC 11.64~55.66 mg/L, BOD EMC 6.66~49.88 mg/L, T-N EMC 7.650~43.825 mg/L and T-P EMC 0.711~3.855 mg/L. According to the results of the analysis on the correlations between pollutants, TSS and BOD, COD, T-N and T-P had correlations at a 0.53~0.95 confidence level. In addition, according to the result of the analysis on the correlations between EMC (mg/L) and storm runoff ($m^3$), the correlation was well explained by a Cubic regression. In addition, among the determination coefficients, TSS and T-N were relatively high, at 0.767~0.835 and 0.773~0.901 respectively, which indicates that EMC goes up as the storm runoff increases. Therefore, it is expected that EMC can be forecasted according to the amount of runoff ($m^3$). The results of this research will be a practical information for the assessment of the non-point source pollution that occurs in the lower reaches of the livestock area.

• Korean Journal of Organic Agriculture
• /
• v.28 no.2
• /
• pp.251-261
• /
• 2020

The developmental ecology and temperature-dependent growth model were calculated to develop the Scotinophara lurida control technology, which is mainly affected by environmentally friendly rice cultivation. The survival rate of S. lurida after overwintering in 2019 showed that 167 of 224 survived and the survival rate was 72.8%. Overwintering adult of S. lurida occur in rice fields in mid-June, spawn in early July, and first-generation adults develop in mid-August. In order to determine the temperature-dependent growth model, the growth periods by temperature and development stage were investigated in a incubator at 18, 21, 24, 27, 30℃ and 14L: 10D. The period from egg to adult at the temperature of 18, 21, 24, 27, 30℃ was 119.8, 73.1, 53.5, 39.4, and 82.0 days, respectively. The best development temperature was at 27℃. The regression curve was obtained by analyzing the relationship between temperature and growth rate using the Excell program, and the base temperature threshold and effective cumulative temperature for each development stage were calculated. From eggs to 5 nymphs of S. lurida the base temperature threshold was 17.9℃ and the effective cumulative temperature was 380.2 DD.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.10
• /
• pp.656-663
• /
• 2012

After the construction of waterworks automatic meter reading with 15 mm diameter digital water mater with magnetoresistance sensor developed in this study at 96 households of apartment complexes located in Incheon-City B-Gu S-Dong, the feasibility of field application of waterworks automatic meter reading was evaluated. The field application of waterworks automatic meter reading was performed from July to December in 2011, and average reception rate was as low as 84.6% due to the instable wibro networks, the existence of communication blackout and temporary malfunction of router. After the extraction of 10 households with one to five residents out of 96 households by using stratified random sampling method and analysis of domestic water use, it was found that domestic water use was significant at August and showed a decreasing trend at September, followed by increase in domestic water use at November and decrease in domestic water use at December. This phenomenon should be attributed to weather factors (temperature, humidity, etc.), which significantly affected domestic water use. Similar trend in domestic water use in terms of weather factors was obtained in case of Liter per capita day of water use after the extraction of 30 households out of 96 households by using stratified random sampling method. After analysis of Liter per capita day for 96 households, single residents increases resulted in reduction of domestic water usage by about 14% of Liter per capita day. These results might be due to the fact that domestic water usage such as laundry, beverages, catering, cleaning, etc. should be required for even the household with one resident, whereas domestic water usage for those common utilization can be significantly saved for the household with more than one resident.