• The Journal of the Acoustical Society of Korea
• /
• v.42 no.4
• /
• pp.320-328
• /
• 2023

Underwater active target detection is vital for defense systems, requiring accurate detection and estimation of distance and velocity. Sequential transmission is necessary at each beam angle, but divided pulse length leads to range ambiguity. Multi-frequency transmission results in time-bandwidth product losses when bandwidth is divided. To overcome these problem, we propose a novel method using Generalized Sinusoidal Frequency Modulation (GSFM) for rapid target detection, enabling low-correlation pulses between subpulses without bandwidth division. The proposed method allows for rapid updates of the distance and velocity of target by employing GSFM with minimized pulse length. To evaluate our method, we simulated an underwater environment with reverberation. In the simulation, a linear frequency modulation of 0.05 s caused an average distance estimation error of 50 % and a velocity estimation error of 103 % due to limited frequency band. In contrast, GSFM accurately and quickly tracked targets with distance and velocity estimation errors of 10 % and 14 %, respectively, even with pulses of the same length. Furthermore, GSFM provided approximate azimuth information by transmitting highly orthogonal subpulses for each azimuth.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.6 s.109
• /
• pp.587-596
• /
• 2006

Recently a new spectrum ruling has been proposed for UWB(Ultra-Wideband) communication applications. The new proposal is expected to reduce the usable UWB spectrum significantly and may cause to weaken the unique advantages of the UWB pulses such as high resolution synchronizations and robustness to the multipath effects. In this paper, we investigate the performance degradation caused by the reduced UWB spectrum. As a means to overcome the performance degradation, a modified discrete linear frequency modulation technique is proposed. We show that, when multipath components are present in the received signal, the proposed method exhibits superior performances in terms of pulse detection efficiency and range resolutions.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.14 no.5
• /
• pp.472-485
• /
• 1989

This paper represents the occurrence structure of the timing variation of TV horizontal synchronizing pulse(H-sync pulse) in mobile TV reception. Fluttering ghost is caused by timing varations of the H-sync pulse and is due to frequency elective fading in a multipath propagation envoronment. H-sync timing fluctuations, and hence, fluttering ghost are directly correlated with the multipath parameters, i.e., H-sync timing fluctuations reflect well the severity of the multipath environment. The occurrence structure of H-sync timtng fluctuation is analysed theoretically in relation to the multipath environnment. The occurrence structure of H-sync timing fluctuation is analysed theoretically in relation to the multipath parameters, assuming the two-ray propagation model. The H-sync timing fluctuation occurs with the variation in relative phase and /or D/U variation of long-delayed multipath waves.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.37 no.3
• /
• pp.66-71
• /
• 2000

A new Soft Recovery Quasi-Resonant Converter (SR QRC) haying multiple order folding snubber network is proposed. It is combined with normal quasi-resonant converter with folding snubber network of which the surrounding components are composed of diodes and capacitors. The reverse recovery loss of main rectifier diode is eliminated by this method utilizing multiple resonance. The proposed converter has PWM capability with high efficiency and is suitable for high voltage and high power applications. By extension of this concept to other switching converters, a new family of SR PW QRC may be developed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.6
• /
• pp.1174-1181
• /
• 2005

The exact bit error rate(BER) calculation of an UWB-TH PPM multiple access communication system, which is known to be suitable for the fast transmission of massive information data, is introduced. The statistic feature of the multiple access intereference (MAI) of the system is precisely modeled by the characteristic function technique. The concrete expression for the MAI allows the exact expression for BER to be derived. In addition, we propose the approximate expression for the BER which reveals superior accuracy to the expression from the previous Gaussian approximation of the MAI. The validity of the proposed expressions is confirmed from the comparison of proposed results with the results from Monte-Carlo simulation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.6
• /
• pp.572-580
• /
• 2015

RF skin tracking of instrumentation RADAR cannot acquire stable track data, because of effect of multipath interference especially elevation direction. In this paper, low altitude target tracking method using laser tracking system is suggested to overcome this restriction. The effect of multipath can be reduced by increasing angle resolution with laser characteristics of very short pulse and narrow beamwidth. RF skin track, beacon track and laser track data for the integrated calibration target on the ground and target ship on the sea are gathered. And they are compared and analyzed to confirm the performance of laser tracking system. As a result, it shows that the suggested laser track method has better performance than RF skin track under multipath conditions.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.6
• /
• pp.1435-1440
• /
• 2010

This paper presents encrypted secret code recording system which can insert an unique manufacture ID code after complete disc process. First, we detect a memory block synchronizing signal which is SYNC. by using FPGA, then, design a recording pattern to write Multi Pulse. Finally, a method that any data is recorded in any place in any data area of optical disc by using a FPGA was proposed. Newly proposed method in this paper that any user records user data in protected data areas on digital video optical discs, can be very useful for effective software copy protection, and can be applicable to encrypted record on high density DVD in near future.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.10
• /
• pp.29-33
• /
• 2010

UV laser micromachining of metallic materials has been used in microelectronic and other industries. This paper shows on experimental investigation of micromachining of copper using a 355nm UV laser with 50ns pulse duration. A finite element model with high strain rate effect is especially suggested to investigate the phenomena which are only dominated by mechanically pressure impact in disregard of thermally heat transfer. In order to consider the strain rate effect, Cowper-Symonds model was used. To analyze the dynamic deformation during a very short processing time, which is nearly about several tens nanoseconds, a commercial Finite Element Analysis (FEA) code, LS-DYNA 3D, was employed for the computational simulation of the UV laser micro machining behavior for thin copper material. From these computational results, depth of the dent (from one to six pulsed) were observed and compared with previous experimental results. This will help us to understand interaction between UV laser beam and material.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.10A
• /
• pp.816-829
• /
• 2003

In this paper, we evaluate the performance of PN (Pseudo Noise) code based time hopping sequences for M-ary UWB (Ultra Wide Band) multiple access systems using the equicorrelated signal sets. In particular, we consider two different types of M-ary UWB systems in UWB indoor wireless multipath channels: The first type of the systems (System #1) has identical symbol transmission rate regardless of the number of symbols M since the length of signal pulse train is fixed while M increases, and the second type of the systems (System #2) has the same bit transmission rate regardless of M since the length of signal pulse train is extended according to the increase of M. We compare the proposed systems with those using the ideal random time hopping sequence in terms of the symbol error rate performance. Simulation results show that the PN code based time hopping sequence achieves quite good performance which is favorably comparable to that of the ideal random sequence. Moreover, as M increases, we observe that System #2 shows better robustness against multiple access interference than System # 1.

• Laser Solutions
• /
• v.17 no.3
• /
• pp.15-18
• /
• 2014

In this paper, we studied a machining method using a diffractive beam splitter (DBS) and multi- pulse repeated radiation for breathable film. We fabricated micro-grooves on polypropylene (PP) films using multi-pulse radiation and one-shot radiation (radiating pulses at once) and a DBS. In the result, width and depth of the PP film using multi-pulse repeated radiation were more precisely controllable. Therefore, this method can be applicable to in manufacturing breathable film precisely at a high speed.