• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.04a
• /
• pp.702-703
• /
• 2014

• Journal of KSNVE
• /
• v.9 no.6
• /
• pp.1137-1144
• /
• 1999

Most of ANC(active noise control) researches are focused on adaptive algorithms, computer simulations and implementations of single-channel system in experimental environments. In this paper, a multi-channel ANC system based on DSP's was developed to obtain global attenuations over wide region and applied to the active control of the humming noise generated by a transformer. The developed ANC system including 24 microphones and 12 spearkers was applied to the real transformer noise reduction problem. Results showed that the control system could successfully control the humming noise over the region of interest.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.04a
• /
• pp.245-246
• /
• 2009

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.202-207
• /
• 2002

This paper deals with a novel shunted actuator, which has a capability to suppress multi-mode vibration amplitudes by using a pair of piezoceramic patches. In order to describe the characteristic behaviors of shunted dampers connected with a series and a parallel resistor-negative capacitive branch circuit, the stiffness ratio and loss factor with respect to the non-dimensional frequency are considered. To obtain a guideline model of a piezo/beam system connected with a series and a parallel resistor-negative capacitor branch circuit, the governing equations of motion is derived through Hamiltons principle and a piezo sensor equation as well as a shunt damping matrix is developed. The theoretical analysis shows that the shunted actuator developed in this study can significantly reduce multiple-mode vibration amplitudes simultaneously over the whole structural frequency range.

• Journal of KSNVE
• /
• v.8 no.6
• /
• pp.1121-1129
• /
• 1998

This research is concerned with the multiple PPF and the modified LQG controller design for active vibration control of intelligent structures. The intelligent structure is defined as the structure equipped with smart actuators and sensors. Various control techniques aimed for the piezoceramic sensors and actuators have been proposed for the active vibration control of smart structures and some of them prove their effectiveness experimentally. In this paper, the multiple PPF controller and the modified LQG controller are developed and applied to the smart grid structure. The multiple PPF control and the modified LQG control can be classified as the classical and the modern control techniques. respectively. The experimental results show that both control techniques are effective in suppressing vibrations. Two control techniques are compared with respect to the design process. the ease of implementation and the effectiveness

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.1
• /
• pp.115-121
• /
• 2000

Command shaping is an important method to reduce vibration in flexible beam. This paper presents a very simple command control shaping which eliminates multiple mode residual vibration in a flexible beam in finite time. The command is constructed by solving linear equations. The finite time duration in which the desired motion of joint angle is achieved along with elimination of the residual vibration can be arbitrarily specified. The necessary conditions for using command as a reference input for the joint angle in a closed-loop configuration are also discussed. The effectiveness of Proposed scheme is demonstrated through computer simulation.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.10a
• /
• pp.309-313
• /
• 2011

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.10a
• /
• pp.113-114
• /
• 2011

• Journal of KSNVE
• /
• v.11 no.1
• /
• pp.147-155
• /
• 2001

This paper is concerned with the real-time automatic tuning of the multi-input multi-output positive position feedback controllers for smart structures by the genetic algorithms. The genetic algorithms have proven its effectiveness in searching optimal design parameters without falling into local minimums thus rendering globally optimal solutions. The previous real-time algorithm that tunes a single control parameter is extended to tune more parameters of the MIMO PPF controller. We employ the MIMO PPF controller since it can enhance the damping value of a target mode without affecting other modes if tuned properly. Hence, the traditional positive position feedback controller can be used in adaptive fashion in real time. The final form of the MIMO PPF controller results in the centralized control, thus it involves many parameters. The bounds of the control Parameters are estimated from the theoretical model to guarantee the stability. As in the previous research, the digital MIMO PPF control law is downloaded to the DSP chip and a main program, which runs genetic algorithms in real time, updates the parameters of the controller in real time. The experimental frequency response results show that the MIMO PPF controller tuned by GA gives better performance than the theoretically designed PPF. The time response also shows that the GA tuned MIMO PPF controller can suppress vibrations very well.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2020.07a
• /
• pp.583-584
• /
• 2020

철도의 고속화 및 수송력 증대로 인하여 철도 터널 및 주변 환경에서 발생하는 소음 및 진동 공해는 커다란 사회문제로 대두되고 있으며, 도시의 고층화로 인해 차단벽을 이용한 방음 기술의 한계와 철도 차량의 고속, 경량화 추세로 인한 소음. 진동, 위험상황으로 인한 문제는 지속적으로 발생하고 있다. 본 논문에서는 IoT 기술을 결합한 안정성을 보장하는 IT 기반기술의 위험상황 감지, 철도 소음진동 분석, 모니터링 및 제어할 수 있는 시스템을 설계하고, 철도 인근지역 주민 또는 유관기관에 소음진동 수치에 따른 적합한 대응 시스템을 제공할 수 있는 IoT 기술 제어 분석 및 안정화 서비스 시스템을 설계하였다.