• Journal of Digital Convergence
• /
• v.20 no.3
• /
• pp.9-18
• /
• 2022

Organizational performance is directly associated with leaders' behavior and the importance of various leadership types are continuously emphasized. Various of leadership types are possessed of different roles and influences. Nowadays, Chinese organizations continue to reinforce social responsibility and demand ethical elements for continuous development of organization and performance improvement. It shows that the importance of ethical leadership is emphasized among Chinese organizations. Based on this phenomenon, this research focused on identifying the role of ethical leadership and verifying the level of performance. According to the current situation that requires innovation in relation to performance, we focused on the employees' innovative behavior. Furthermore, we also verified serial multiple mediating effects of trust in leader and voice behavior on the relationship between ethical leadership and innovative behavior. This research focused on 336 employees in Chinese small and medium-sized enterprises to conducted a survey and the data were used in empirical analysis. The results showed ethical leadership had a positive influence on innovative behavior. In additon, the serial multiple mediating effects of trust in leader and voice behavior were verified. Overall, this research focused on exploring performance that can be achieved through ethical leadership and finding the ways to improve performance. Finally, the future research related to ethical leadership and performance was presented.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.2 no.4
• /
• pp.28-35
• /
• 1997

본 논문에서는 송전선로에 직렬로 삽입되어 선로의 리액턴스를 동적으로 보상하는 인버터식 직렬보상기에 대한 동적 응동 해석을 기술하고 있다. 이 직렬보상기는 다중펄스로 동작하는 전압원인버터와 결합변압기, 그리고 제어장치로 구성되어 있으며, 점호각을 조절하여 선로의 리액턴스를 가변하고 용량성 뿐만 아니라 유도성 보상도 가능하다. 이 보상기로 선로의 리액턴스를 감소시키면 전송 유효전력의 증각가 가능한데, 이러한 효과를 본 논문에서는 단일기-무한대-버스 전력계통에 대해 EMTP를 이용한 시뮬레션으로 확인하였으며, 또한 축소모형 제작과 실험을 통해 실험적으로 확인하였다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.3
• /
• pp.11-17
• /
• 2003

In this paper, we implemented 2-wire (data gnd) RS232C serial communication interface by applying the Collision Sensing Multiple Access(CSMA) Protocol. The transmitting and receiving wires of RS232C pert are connected together by the interface circuit forming data wire without hardware modification On two-wired common channel connection simultaneous transmission Don mere than two hosts causes data collision. The collision is detected by loop-back test of transmission data comparing with the fed back data to detect the data distortion. Various models are adopted to reduce the probability of retransmitted data collision and experiments show the performance of each cases. Due to allowing multiple hosts to be accessed through the common communication channel with minimum circuit addition the result of this paper can be easily applied for conventional RS232C instruments and machines to connect to the single data communication line.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.3
• /
• pp.231-241
• /
• 2004

This paper drives the exact expression of bit error rate(BER) performance for groupwise iterative-multipath interference cancellation(GWI-MPIC) algorithm for cancelling multipath interference components in a coherent high-speed downlink packet access(HSDPA) system of W-CDMA downlink and the BER performance is evaluated by numerical analysis. The performance of GWI-MPIC is compared to the successive interference cancellation(SIC) algorithm for multipath components. From numerical results, the optimal average BER performance of weighting factor ${\beta}$$\_$h/ for interference cancellation is obtained at ‘${\beta}$$\_$h/=0.8’ and then this weighting factor is hereafter applied to other performance analysis. Numerical results showed that the average BER performance of GWI-MPIC algorithm is rapidly degraded at multipath L=6, but is revealed the good performance than that of SIC algorithm in terms of increasing the number of multipath. This results also indicated that the average BER performance is greatly degraded due to increasing interference power more than multicode K=8. The average BER performance of the proposed algorithm is superior to the performance of SIC algorithm about 3 ㏈ for processing gain PG=128 at multipath L=2 and Average BER=1.0${\times}$10$\^$-5/. And also, the results produced good performance in case of linear monotonic reduction of multipath fading channel gain than that of constant channel gain variation, because multipath fading channel gain which is arrived later is small.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.9C
• /
• pp.1219-1226
• /
• 2004

The objective of this paper is to proposed a new Hybrid Interference Cancellation(HlC) receiver to cancel MAI in a multirate DS-CDMA system based on multiple processing gain(MPG). We propose a new improved HIC scheme that divides the active users with different data rates split into a number of groups for effectives cancellation Between each group, GW-PIC is performed to cancel other group signals and within them, SIC is carried out to remove multiple access interference in group. We analyze the performance of the proposed receiver in terms of the bit error rate(BER) and examine its performance. As a conclusion, computer simulations show that the proposed schemes outperforms adaptive multistage PIC and conventional SIC receiver over AWGN channel.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2014.11a
• /
• pp.573-575
• /
• 2014

클럭 경쟁에서 코어 경쟁으로 전환된 요즘. 병렬 프로그래밍은 중요 하다. 동기화 개체를 사용하면 병목 현상이 발생하며, 1:1 Thread 모델은 자원의 낭비와 문맥전환 비용이 발생한다. Thread 풀 모델은 직렬화에 약점을 가지는게 되는데, 본 논문에서는 다중 개체 대응에 적합한 병렬 프로그래밍 모델을 제시한다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.3
• /
• pp.177-187
• /
• 2009

This paper describes the gain characteristics of Multi-output LLC series resonant converter by using the new analytical method. Specially, using the Math-CAD simulated result, this paper analyzes an influence from the secondary leakage inductance of transformer. The theoretical results are verified through an experimental prototype of the 430W 3-output LLC resonant converter for 46inch PDP power module.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.1
• /
• pp.13-22
• /
• 2004

This paper drives the exact expression of bit error rate(BER) performance for successive interference cancellation(SIC) algorithm against multipath interference components in a high-speed downlink packet access(HSDPA) system of W-CDMA downlink and the BER performance is evaluated by numerical analysis. Numerical results showed that the average BER performance is rapidly saturated in terms of increasing the number of multipath and is revealed significant improvement for improvement Processing gain(PG). For example, the average BER Performance of the SIC algorithm is superior to the performance of conventional scheme by more than 7dB and 1.4dB for processing gain PG=54 and 128 under the two-path channel and average BER=$1.0{\times}10^{-3}$, respectively. This results also indicated that the average BER saturation is occurred at nearly one weight factor which is assigned to pilot and data channels. Likewise, the average BER performance is greatly degraded due to increasing the interference power in proportional to the number of multipath with increasing multicode K. And the smaller multipath fading channel gain is arrived later, the more the average BER performance is improved. The results of performance analysis in this paper indicated that the multipath interference cancellation is required to improve the BER performance in a HSDPA system under multicode for high-speed packet transmission, low spreading factor, and multipath fading channel.

• Journal of the Korea Society for Simulation
• /
• v.26 no.3
• /
• pp.13-22
• /
• 2017

This research proposes and applies a pipelining parallel processing technique to enhance the speed of visualizing the results of real-time simulations. Generally, a simulation with real-time visualization consists of three processes: executing a simulation model, transmitting simulation result, and visualizing simulation result. If we have these processes in serial, the latency from simulation to visualization will be very long, which degrades the speed of visualization of data from real-time simulation. Thus, the main purpose of this research is maximizing performance by adapting pipelining parallel processing technique to the real-time simulation visualization. Also we show that performance is improved by adding multi-threading technique to each process. This paper proposes a theoretical performance model and simulation results of the techniques and then we applied this to an air combat simulation model as a case study. As the result, it shows that the performance is greatly enhanced than the original model's execution time.

• Journal of Convergence for Information Technology
• /
• v.7 no.6
• /
• pp.173-179
• /
• 2017

Recently, with the development of IoT, there have been increasing cases of transmitting and receiving data by connecting more than one devices supporting various communication methods. In this paper, we propose a multi-terminal emulator supporting various communication methods. The system supports multiple channel connections for each communication method, schedules data transmission, collects communication statistics, represents them into graphs, and stores log records. By using this system, it is possible to test the communication connection between multiple devices, and it is expected to provide convenience for IoT system development.