• Journal of Practical Agriculture & Fisheries Research
• /
• v.20 no.1
• /
• pp.163-174
• /
• 2018

Rice cultivation is immensely affected by many climatic factors including temperature, precipitation, etc, and imbalanced climatic conditions negatively affect the growth of rice. In this study, we investigated the effects of different agroclimatic zones of Chungnam Province on rice quality and examined the correlations between climatic characteristics and rice yield components. Average temperatures and rainfall were higher in 'Western Sobaek Inland' than those in the 'South Western coastal zone, and precipitation records showed a wide variation among counties due to typhoons during the examined periods. The average accumulative temperature affecting the magnitude of production during reproductive growth periods was higher in "Cheon-An", "Gong-Ju", "Yeon-Gi (Se-Jong)", "Bo-Ryeong", and "Dang-Jin" counties than those in other counties. The plant height was higher in 'Western Sobaek Inland' counties such as "Yeon-Gi(Se-Jong)" and "Cheon-An", and 'Southern Charyeong Plain' counties such as "Cheong-Yang", "Dang-Jin", and "A-San", than those in other counties. The number of tillers during the 40 days after rice transplantation in "Seo-Cheon" and "Bo-Ryeong" counties increased compared to other counties. This result was relevant to the fact that the date of rice transplantation in those counties was 3 to 4 days later than those in other counties of Chung-Nam Province. The average yield (milled rice basis) was the highest in 'Western Sobaek Inland' zone, showing 3,756 kg ha^-1, followed by 'Southern Charyeong Plain' zone showing 3,621kg ha^-1, and was the lowest in 'South Western coastal zone by 3,315kg ha^-1. "Yeon-Gi(Se-Jong)" and "Dang-Jin" counties showed the highest yields of 4,100kg ha^-1. "Seo-San", "Seo-Cheon", and "Tae-An" counties were relatively lower yields of 3,240~3,280kg ha^-1 in comparison of other counties.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.20 no.1
• /
• pp.5-18
• /
• 2018

The field trial was performed to evaluate the rice growth and yield in direct seeding cultivation with iron-coated rice seeds. The required time for seed emergence was for 9~11days in the tested direct seeding methods. That was 1~2days earlier in direct seeding with pregerminated seeds than that of direct seeding with iron-coated seeds. The seedling establishment was highest in water seeding with iron-coated seeds but there was not significant difference in terms of statistical analysis. The rice plant height was taller in water seeding with broadcasting method than that of wet hill-seeding methods and in direct seeding with iron-coated seeds than that of direct seeding with pregerminated seeds. The tiller number in the rice plant was the highest in machine transplanting at 30days after direct seeding(June 17) and in water seeding with iron-coated seeds at 45days after seeding(DAS) and 60DAS. The tiller number of 75 and 90DAS in the tested rice cultivation methods being with 352~405/m² was not significantly different in terms of statistical analysis. The heading time was not different in rice direct seeding methods but 2 day earlier in direct seeding with iron-coated seeds than that of direct seeding with pregerminated seeds. The culm length was the highest in water seeding with iron-coated seeds and the panicle length was the longest in wet hill-seeding with pregerminated seeds. The panicle number per m² was highest in water seeding with iron-coated seeds but not significant difference among the tested rice cultivation methods. The water seeding with iron-coated seeds resulted in the highest spikelet number per m² and the heaviest grain weight of brown rice. Percentage of ripened kernel was the highest in wet hill-seeding with iron-coated seeds. But there were not significant among the tested rice cultivation methods. The milled rice yield in direct seeding methods was 3~21% higher than that in machine transplanting. Water seeding with iron-coated seeds recorded the highest milled rice yield being with 6.86t/ha.The occurrence of sheath blight was high according to machine transplanting>wet hill-seeding>water seeding. Weed occurrence was the highest in water seeding with pregerminated seeds. Weedy rice occurred not in machine transplanting but occured 0.6~0.7% in direct seeding methods with pregerminated seeds and 0.1% in direct seeding with iron-coated seeds.

• KIPS Transactions on Software and Data Engineering
• /
• v.12 no.11
• /
• pp.471-480
• /
• 2023

The Korean construction order volume in South Korea grew significantly from 91.3 trillion won in public orders in 2013 to a total of 212 trillion won in 2021, particularly in the private sector. As the size of the domestic and overseas markets grew, the scale and complexity of EPC (Engineering, Procurement, Construction) projects increased, and risk management of project management and ITB (Invitation to Bid) documents became a critical issue. The time granted to actual construction companies in the bidding process following the EPC project award is not only limited, but also extremely challenging to review all the risk terms in the ITB document due to manpower and cost issues. Previous research attempted to categorize the risk terms in EPC contract documents and detect them based on AI, but there were limitations to practical use due to problems related to data, such as the limit of labeled data utilization and class imbalance. Therefore, this study aims to develop an AI model that can categorize the contract terms based on the FIDIC Yellow 2017(Federation Internationale Des Ingenieurs-Conseils Contract terms) standard in detail, rather than defining and classifying risk terms like previous research. A multi-text classification function is necessary because the contract terms that need to be reviewed in detail may vary depending on the scale and type of the project. To enhance the performance of the multi-text classification model, we developed the ELECTRA PLM (Pre-trained Language Model) capable of efficiently learning the context of text data from the pre-training stage, and conducted a four-step experiment to validate the performance of the model. As a result, the ensemble version of the self-developed ITB-ELECTRA model and Legal-BERT achieved the best performance with a weighted average F1-Score of 76% in the classification of 57 contract terms.

• Journal of the Korean Society of Earth Science Education
• /
• v.16 no.3
• /
• pp.340-350
• /
• 2023

This study analyzed the difficulty level of class on the seasonal change unit for 84 students at a university of education. The conclusions of this study are as follows. First, if we first present the four topics that make up the seasonal changes in elementary science, the subjects that have the greatest difficulty in teaching for prospective elementary school teachers are 'Why do seasonal changes occur?' (Teaching difficulty level 4.05), 'The sun changes depending on the season' What is the difference between the southern altitude and the length of day and night?' (difficulty level of class, 3.12), 'What is the relationship between the altitude of the sun, length of shadow, and temperature during the day?' (difficulty level of class, 2.85), 'How does the temperature change depending on the season?' (class difficulty level 2.80). As a result, in the elementary science season change unit, the class on the four topics 'Why do seasons change?', which is classified as a class topic that requires the concept of spatial perception, showed a higher level of class difficulty than other units. Second, in the seasonal change unit, various factors of class difficulty appeared depending on the class topic. When pre-service elementary school teachers look at the factors that make class difficult when teaching a lesson on seasonal changes in order of frequency, 42 (50%) said 'Experimental instruction for comparing the altitude of solar masculine according to the tilt of the axis of rotation', followed by 'Solar masculine'. 38 people (45%) answered 'Difficulty in explaining mid-high altitude and the length of day and night', 27 people (32%) answered 'Difficulty in explaining the concept of mid-high altitude', and 24 people (32%) answered 'Difficulty in explaining seasonal changes in the sun's position.' 29%), 20 people (24%) said 'Explain the reasonable reason why the height of the light should be adjusted when measuring the solar altitude', and 16 people (19%) said 'It is difficult to explain the reason for the discrepancy between the solar altitude and the maximum temperature'. ), 'difficulties in measuring sand (ground) temperature' were mentioned by 12 people (14%). Third, when analyzing the factors of class difficulty, there were more curriculum factors than teacher factors. In this context, the exploratory activities on 'Why do seasonal changes occur?', the fourth topic of the seasonal change unit in which elementary school pre-service teachers showed the greatest difficulty in teaching, need improvement in terms of the curriculum.

• Journal of Food Hygiene and Safety
• /
• v.38 no.6
• /
• pp.489-495
• /
• 2023

In this study, we detected the presence of residual pesticides in 341 agricultural products collected from local food outlets in western Gyeonggi Province. Residual pesticides were detected in 105 (30.8%) samples. Six samples exceeded the legal limits for residual pesticides, resulting in a non-compliance rate of 1.8%, which was slightly higher than the average non-compliance rate of 1.4% in the last three years. Among the tested agricultural products, only fruits and vegetables were found to have pesticide residues, with 24 of 34 fruits (a detection rate of 70.6%) and 81 of 277 vegetables (a detection rate of 29.2%) testing positive. In total, 59 types of pesticides, including acetamiprid, which was detected 208 times, were detected and had a detection range of 0.01-2.38 mg/kg. Among the 105 agricultural products containing pesticide residues, a single pesticide was detected in 62 samples (59%) and two or more pesticides were detected in 43 samples (41%). In particular, 14 pesticides were detected in the same sample of peaches; dinotefuran was detected 21 times. Upon examining the toxicity of the detected pesticides, Class III pesticides (moderate toxicity) were detected 44 times (21.2%) and Class IV pesticides (low toxicity) were detected 164 times (78.8%). Class I, II, and III pesticides with fish toxicity were detected 68 (32.7%), 14 (6.7%), and 126 times (60.6%), respectively. Upon examining the exposure to high-frequency pesticide components detected five or more times, the hazard index was found to be ≤2.8%. Accordingly, the hazard of residual pesticides based on dietary intake was deemed insignificant.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.68 no.3
• /
• pp.167-174
• /
• 2023

This study investigated the microstructure and water absorption characteristics of the Korean adzuki bean (Vigna angularis L.) cultivar under accelerated storage. The germination rate, acid value, redness (a^*), and yellowness (b^*) values showed no significant differences after three months of storage compared to pre-storage under low temperatures (4℃). However, a statistically significant difference was observed under accelerated high temperatures (45℃). In particular, after storage for three months, the germination rate and acid value were 0% and 33.63 mg KOH/100g, respectively, under accelerated high temperatures. After storage for three months, the holes, hilum damage, and spaces between the seed coat and cotyledon shortened the time and speed of water absorption under accelerated high temperatures compared to that under low temperatures. Conversely, further research is required to investigate the reason for the low rate of parallel water absorption.

• Korean Journal of Remote Sensing
• /
• v.39 no.6_1
• /
• pp.1299-1308
• /
• 2023

Forest fires are becoming more frequent and larger around the world due to climate change. Remote sensing such as satellite images can be used as an alternative or assistance data because it reduces various difficulties of field survey. Forest burn severity (differenced normalized burn ratio, dNBR) is calculated through the difference in normalized burn ratio (NBR) before and after a forest fire. The images used in the NBR formula are based on Landsat's near-infrared (NIR) and short-wavelength infrared (SWIR) bands. South Korea's satellite images don't have a SWIR band. So domestic studies related to forest burn severity calculated dNBR using overseas images or indirectly using the normalized difference vegetation index (NDVI) using South Korea's satellite images. Therefore, in this study, dNBR was calculated by substituting the mid-wavelength infrared (MWIR) band of Kompsat-3A (K3A) instead of the SWIR band in the NBR formula. The results were compared with the dNBR results obtained through Landsat which is the standard for dNBR formula. As a result, it was shown that dNBR using K3A's MWIR band has a wider range of values and can be expressed in more detail than dNBR using Landsat's SWIR band. Therefore, it is considered that K3A images will be highly useful in surveying burn areas and severity affected by forest fires. In addition, this study used the K3A's MWIR band images degraded to 30 m. It is considered that much better results will be obtained if a higher-resolution MWIR band is used.

• Journal of Venture Innovation
• /
• v.5 no.4
• /
• pp.109-115
• /
• 2022

As the 4th industrial revolution progresses, foreign countries are promoting smart manufacturing innovation through digital transformation as a priority task early on to secure a competitive edge in the manufacturing industry. In response, the Korean government is also promoting a policy to enhance the competitiveness of small and medium-sized manufacturing companies by promoting digital transformation in the corporate sector to meet the global trend of the 4th industrial revolution era. Manufacturing powerhouses such as Germany and Japan see manufacturing as a key sector in digital transformation and are leading related policies, while emerging countries such as China are also promoting manufacturing innovation strategies such as building digital infrastructure and creating a digital innovation ecosystem. Korea is promoting the 'Korean-style smart factory dissemination and expansion strategy' by transforming Germany's manufacturing innovation strategy for smart factory supply to suit the domestic situation. However, the policy to supply smart factories so far has been conducted with support from individual companies under the leadership of the government, and most of the smart factories are at the basic level, and it is evaluated that there are limitations such as the lack of manpower to operate smart factories. In addition, while the current policy focuses on expanding the supply of smart factories in SMEs, it is necessary to establish a smart manufacturing system through linkages between large and small businesses in order to achieve the original goal of establishing a smart manufacturing system. Therefore, it can be said that from the standpoint of small and medium-sized enterprises (SMEs), who are consumers of smart factories, it can be said that the digital transformation policy can achieve the expected results only when appropriate incentives are provided for the introduction of smart factories in a situation where management resources such as funds, technology, and human resources are lacking. In addition, it is judged that the uncertainty of the performance of digital investment always exists, and as long as large and small companies are maintained as an ecosystem of delivery and subcontracting, there is very little incentive for small and medium-sized manufacturing companies to voluntarily invest in or advance digital transformation. Therefore, the digital transformation policy of small and medium-sized manufacturing companies in the future has practical significance in that it suggests that there is a need to seek ways to attract SMEs' digital-related voluntary investment.

• Journal of Venture Innovation
• /
• v.6 no.4
• /
• pp.99-111
• /
• 2023

This study aims to confirm that consumers' satisfaction with online shopping websites has changed to a phenomenon different from the past. In other words, in a situation where the use of e-commerce is expanding worldwide after the pandemic and various types of commerce such as mobile commerce and social commerce are formed, the consumer's information processing and decision-making process are meaningful in examining the behavior that has been changed based on the perceived motivation level of consumers by the new environment according to the consumption value and personal characteristics perceived by the consumer. In other words, the purpose of this study was to investigate the effect of consumption value and need for cognition on the satisfaction toward online websites as a mediating role in the trust of the website. As a result of testing Hypothesis 1, not only the hedonic value of the consumer for the website but also the utilitarian value had a positive influence on the satisfaction toward the website, and in particular, the utilitarian value showed a relatively greater influence than the hedonic value. However, the negative relationship between the need for cognition and satisfaction was found to be at a significant level under one-sided verification. In Hypothesis 2, only the utilitarian value among the consumption values of 2-1 showed a positive effect on satisfaction through a mediating role of trust. It was confirmed that the utilitarian value among the consumption values was an important factor in the satisfaction toward the website. The significance of this study is that, unlike previous research results, not only consumption value based on senses and emotions but also utilitarian value has a greater influence. Therefore, utilitarian value and need for cognition have a stronger influence on satisfaction if they play a mediating role based on the trust of the website used by consumers. These findings reflect the current market trend of online consumption, and they are helpful in the management and strategy of online websites based on consumer behavior understanding and major factors.

• Journal of Venture Innovation
• /
• v.6 no.1
• /
• pp.181-198
• /
• 2023

This study aims to analyze the influence of organizational support perception of workers in medical institutions on intrinsic job motivation, and to check whether there is significance in the mediating effect of work-family conflict and work-family balance factors in this process. The results of empirical analysis through the questionnaire are as follows. First, it was confirmed that organizational support recognition had a significant positive effect on work-family balance as well as intrinsic job motivation, and work-family balance had a significant positive effect on intrinsic job motivation. Second, it was confirmed that organizational support recognition had a significant negative effect on work-family conflict, but work-family conflict had no significant influence on intrinsic job motivation. Third, in order to reduce job stress for medical institution workers, it is necessary to reduce job intensity, assign appropriate workload for ability. And in order to improve manpower operation and job efficiency, Job training and staffing in the right place are needed. Fourth, in order to improve positive organizational support perception and intrinsic job motivation, It is necessary to induce long-term service by providing support and institutional devices to increase attachment to the current job and recognize organizational problems as their own problems with various incentive systems. The limitations of this study and future research directions are as follows. First, it is believed that an expanded analysis of medical institution workers nationwide by region, gender, medical institution, academic, and income will not only provide more valuable results, but also evaluate the quality of medical services. Second, it is necessary to reflect the impact of the work-life balance support system on each employee depending on the environmental uncertainty or degree of competition in the hospital to which medical institution workers belong. Third, organizational support perception will be recognized differently depending on organizational culture and organizational type, and organizational size and work characteristics, working years, and work types, so it is necessary to reflect this. Fourth, it is necessary to analyze various new personnel management techniques such as hospital's organizational structure, job design, organizational support method, motivational approach, and personnel evaluation method in line with the recent change in the government's medical institution policy and the global business environment. It is also considered important to analyze by reflecting recent and near future medical trends.