• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.10
• /
• pp.889-895
• /
• 2008

This paper presents a comprehensive mathematical analysis and simulation of trench IGBT with the help of PIN-PNP combinational model. Since trench IGBT is characteristically influenced by PIN diode, it may be almost impossible to analyze the trench IGBT using PNP-MOS modeling methods, even PIN-MOS techniques which neglect the hole current components coming into p-base region. A new PIN-PNP complementary cooperational model is developed in order to make up the drawbacks of existing models. It would allow us to make qualitative analysis as well as simulation about switching and on-state characteristics of 1,700 V trench IGBT. Moreover, if we improve the PIN diode effects through the optimization of trench structure, trench IGBT is expected to be one of the most promising devices in the not only high-voltage but also high speed switching device field.

• Korean Journal of Optics and Photonics
• /
• v.23 no.5
• /
• pp.227-232
• /
• 2012

A large-signal time-domain model is implemented to analyze an FG-LD (Fiber Grating Laser Diode) in which a reflective laser diode is hybrid-integrated with a fiber Bragg grating (FBG). When the length of the externally integrated resonator is 8 mm, in which the effective FBG length of 2.1 mm is included, a static frequency chirp of 0.44 GHz and a dynamic frequency chirp of 6.4 GHz are observed. In addition, it is also observed that the eye of the 10Gbps NRZ signal is well open. The FG-LD is expected to be a cost-effective solution for a 10Gbps-class single wavelength laser covering a span of 50 km range.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.309-310
• /
• 2006

This paper is about the development of surface inspection of bearing inner and outer race using machine vision. Before this system is developed, most inspections are performed by workers' naked eye. To improve both the inconvenience and incorrectness, another new tester is introduced. This system has the three sections mainly. First one is the mechanism section which transfers bearing manufactured from previous process line to the testing process in plant. Another is the inspection system which is composed of two parts: computer vision and measurement system using laser diode which inspects the defects of the bearing inner or outer race. The other is the pneumatic cylinder part controlled by Programmable Logic Controller(PLC). The system which is developed shows favorable results, and that has the advantage of convenience and correctness compared to previous system.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.123-125
• /
• 2018

태양광발전시스템은 낮은 효율의 PV 패널을 사용하여 최대의 전력을 생산하기 위해 PV 패널의 최대전력점에서 운전하는 MPPT(Maximum Power Point Tracking) 제어가 반드시 필요하다. 기존의 MPPT 알고리즘은 대부분 경사법에 기초하고 있으며 그 중 대표적인 방법이 P&O(Perturb and Observe) 알고리즘이다. P&O 알고리즘의 MPPT 성능을 좌우하는 두 가지 인수는 MPPT 제어주기와 변량전압의 크기이다. MPPT 제어기의 빠른 동특성과 극대화된 효율을 위한 최적의 MPPT 제어주기와 변량전압의 크기를 결정하기 위해서는 실제 날씨 환경에서 다양한 일사량 프로파일 패턴에 대한 MPPT 제어기의 성능분석이 필수적이다. 본 논문에서는 대한민국 중부지역의 전형적인 맑은 날씨와 흐린 날씨에서 실제 일사량을 측정하고, 취득한 일사량데이터를 기초로 저자가 개발한 다이오드 등가모델을 적용하여 시뮬레이션을 수행하였다. 이를 기반으로 MPPT 제어주기의 설정값에 따른 PV 패널의 전력생산량을 예측하여 MPPT 목표 효율을 극대화할 수 있는 최적의 MPPT 제어주기를 제시한다.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.7 no.2
• /
• pp.85-92
• /
• 2003

This paper presents an electric power generating system for stand-alone health monitoring sensor unit of bridge structure based on ambient vibration of bridge. In this paper, a novel electric power generator which has minimum effect of armature reaction is proposed. The related mechanical and electrical design equations are obtained, and a pilot generator has been implemented. In addition, the charging system for extremely low generator current is discussed, and some improvements are identified for the system. This investigation reveals that diode characteristics of rectifier is dominant factor in the charging process. Finally, both the simulation, which uses real measurement data of the Namhae bridge as input of the pilot generator, and indoor test are carried out. The results showed the applicability and effectiveness of the stand-alone vibration powered generator.

• Polymer(Korea)
• /
• v.36 no.4
• /
• pp.519-524
• /
• 2012

Capacitance measurements of the polymer light-emitting diodes (PLEDs) with conjugated polyelectrolyte (CPE) electron transporting layers (ETLs) provide important information of device physics for understanding the function of CPEs as ETLs, together with current density-voltage-luminescence measurements. We investigated the counterion-dependent capacitance behaviors that present a highly negative or positive capacitance at the low frequency, and suggested different carrier injection mechanisms. Capacitance model study reveals that the electron injection mechanism can be described either by the dipole alignment scheme or by electronic charge carrier accumulation at the cathode/ETL/emission layer interfaces.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.6
• /
• pp.598-609
• /
• 2005

Conventional phase shift full bridge (PSFB) converter has serious voltage oscillation problem across the secondary rectifier diodes, which would require the dissipate snubber circuit, thus degrades the overall efficiency. To overcome this problem a new simple voltage oscillation reduction technique (VORT) which effectively reduce the voltage oscillation of the secondary rectifier diodes for phase shift full bridge converter is proposed. Therefore, no dissipate snubber for rectifier diodes is needed. In addition, since it has wide zero voltage switching (ZVS) range, high efficiency can be achieved. Operational principle, analysis of voltage oscillation, and design consideration are presented compare with that of the conventional PSFB converter. To confirm the validity of the proposed VORT, experimental results from a 420W prototype are presented.

• Korean Journal of Optics and Photonics
• /
• v.14 no.3
• /
• pp.279-285
• /
• 2003

Wide- and flat-gain laser diodes were designed and fabricated from asymmetric multiple quantum well (AMQW) structures which consist of three compressively strained InGaAsP wells of different thicknesses. For a 400 ${\mu}{\textrm}{m}$-long lasers with as-cleaved facets, -1 ㏈ and -3 ㏈ gain bandwidth were 45 nm and 80 nm, respectively. For this AMQW structure, calculated gain spectra with various line broadening functions were compared with experimental results. We confirmed the calculated gain spectra using an asymmetric line broadening function were in good agreement with the measured data.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.10a
• /
• pp.7-7
• /
• 2019

우리나라에서의 대마는 마약류로 분류되어 기호용과 의료용 모두 법적인 제재를 받아왔으나 최근에 의료용 대마가 법적으로 허용이 되어 환자들에게 처방 받을 수 있게 되었다. 하지만 우리나라 사람들에게 대마는 환각성분을 가진 마약류로 깊이 인식되어 왔으며 의료용 대마에 대한 연구는 거의 전무한 실정이다. 노지재배에서 발생할 수 있는 범죄의 위험성, 자연교배에 의한 품질저하를 피할 수 있으며 재배조건(양액, 광조건, 광주기, 대기환경조성) 등을 제어할 수 있는 밀폐형 LED 식물공장은 의료용 대마 생산에 제일 적합한 모델이 될 수 있다. 식물체의 광합성은 가시광선 중 특정 파장 450nm 청색광과 660nm 적생광을 주로 이용하며 'LED (Light Emitting Diode) 발광다이오드'는 식물체의 광합성에 적합한 파장으로 광원을 조사할 수 있는 장점이 있다. 이러한 LED를 이용한 광합성은 식물체의 2차 대사물질 Anthocyanins, phenolic compounds 등의 향상과 생육에도 긍정적인 영향을 미치며 식물 뿐만 아니라 광합성을 하는 미세조류(micro algae)에서도 이용이 가능하며 해마토 코쿠스(Hematococcus)의 세포증식과 항산화물질 아스타잔틴(astaxathin)생산에 유용하게 쓰이고 있다. 최근 미국과 다른 나라에서도 기호용, 의료용 대마사업에 대한 관심이 높아지고 있으며 캐나다와 미국에서는 밀폐형 유리온실과 식물공장을 이용한 의료용 대마를 생산, 추출, 가공까지 하여 산업적인 영역을 넓히고 있는 실정이다. 특히, 실내재배에서는 광원이 필수적인 요소이며 식물생육에 선택적인 파장을 조사할 수 있는 LED와 재배조건을 정밀하게 제어할 수 있는 밀폐형 식물공장을 이용한 의료용 대마 생산에 대한 연구가 절실히 필요한 시점이다.

• Journal of the Korean Chemical Society
• /
• v.68 no.4
• /
• pp.185-190
• /
• 2024

Recently, it was reported that the benzobisoxazole (BBO) molecule can be used for independent modulation of the HOMO and LUMO energy levels. In this study, we utilized this interesting property of BBO to quantitatively investigate the substituent effects according the substituents. We designed and proposed four BBO model systems (1BBO, 2BBO, 3BBO and 4BBO) by extending the π-conjugation lengths based on a BBO molecule. Two directions of substitution (x-axis and y-axis) and 15 various substituents were considered. From strong correlation between the LUMO energy levels of x-axis substitution and HOMO energy levels of y-axis substitution calculated from DFT method, it is found that the standardization of substitution effects can be established from BBO model systems. In addition, we demonstrated that the HOMO values of y-axis substituted 3BBO show the best performance to define the order of substituent effects. Our proposed way can be used to expect the substituent effect of any arbitrary substituents and develop the organic sensors and organic light emitting diodes.