• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.6
• /
• pp.402-408
• /
• 2004

This paper proposes the novel V/f control method to improve the stability of a V/f controlled induction motor drive system. The conventional V/f control method used in the proposed V/f control method is a vector-based method that is slightly different from the existing conventional V/f control method. The proposed control method uses a dynamic current compensator to improve the stability of a V/f controlled induction motor drive system. This proposed method is easy to implement and completely eliminates the motor oscillation phenomenon causing the instability of a V/f controlled induction motor drive system, especially when the system is driven near the resonant frequency in steady-state with light load. Additionally, this paper analyzes theoretically the instability of a V/f controlled induction motor drive system and shows the validity of the Proposed V/f control method through simulation and experimental results.

• Proceedings of the Korean Information Science Society Conference
• /
• 1999.10a
• /
• pp.661-663
• /
• 1999

복수 염기서열 정렬(multiple sequence alignment)은 염기서열들 사이의 진화관계, 단백질의 구조와 기능에 관한 연구에 필수적인 도구이다. 다이나믹 프로그래밍(dynamic programming) 방법은 대부분의 경우에 있어 최적의 염기서열 정렬 결과를 제공할 수 있다. 그러나 그것이 사용하는 갭 비용함수 때문에 특별한 경우에 최적의 염기서열 정렬을 만들어 내지 못한다. 본 논문에서는 다이나믹 프로그래밍에 의해 획득된 염기서열을 개선하기 위한 휴리스틱 방법을 제안한 후, 실제 단백질 데이터를 가지고 성능 분석을 한다.

• Korean Journal of Optics and Photonics
• /
• v.14 no.6
• /
• pp.588-593
• /
• 2003

A signal processor for interferometeric fiber optic sensors, which measure dynamic quantities of frequency up to 1 KHz with high sensitivity, is developed. It is a high-speed version of the all-digital phase tracking (ADPT) processor that was used to measure static or slowly-varying quantities. The processor was applied to a fiber optic Mach-Zehnder interferometer to evaluate the performance. The measured total harmonic distortion was near to -50 ㏈, which is the theoretical limit or the ADPT signal processing.

• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.151-153
• /
• 2020

PFC( Power Factor Corrector)회로의 목적은 입력전류의 역률 개선을 목적으로 널리 사용되고 있다. 그리고 입/출력 파워의 균형을 위해 대용량의 출력Cap이 사용되며 주로 전해액이 포함된 부품을 사용한다. 그러나 사용 되는 전해Cap은 AC-DC 변환회로의 수명시간을 결정지으며 이를 사용하는 전자제품의 전체 수명을 반영하게 된다. 본 연구는 출력Cap용량을 최소와시키며 이를 대체 할 수 있는 Film Cap을 사용하여 제품의 전체 수명시간을 개선시키는데 목적이 있으며 다이나믹 특성의 부하와 서지성 낙뢰 및 과전압 대책에 대한 해결방안을 실제 시스템에서 구현하고자 한다. 또한 입력 서지 및 다이나믹 부하에 대한 개선 회로를 확인하고 이론적 결과는 200W LED TV에서 검증한다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.04a
• /
• pp.677-678
• /
• 2011

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.691-692
• /
• 2012

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.31 no.6
• /
• pp.373-380
• /
• 2018

We present the peridynamic dynamic fracture analysis to solve impact fracturing of multilayered glass impacted by a high-velocity object. In the most practical multilayered glass structures, main layers are glued by thin elastic masking films. Thus, it is difficult and expensive to construct the numerical model for such a multilayered structure. In this paper, we employ efficient numerical modeling of multilayered structures with a nonlocal ghost interlayer model in which ghost particles are distributed between main layers and they are interacting with each other in peridynamic way. We also consider a simple nonlocal contact condition in peridynamic frameworks to solve impact and penetration of the high-velocity impactor to the multilayered structure. Finally we can confirm the fracture capabilities of the method using a multilayered glass model in which 7 glass layers and a single elastic backing layer are affixed by polyvinyl butyral films.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.6
• /
• pp.101-109
• /
• 2016

The images captured by digital still cameras or mobile phones are not always satisfactory because the devices have limited dynamic ranges compared with that of the real world. To cope with the problems, tone mapping function based methods and retinex theory based methods are studied. However, these methods generate a halo artifact or limited enhancement of global and local contrasts. The proposed method estimates illumination information used for image enhancement by optimizing a dynamic range of input image. The estimated illumination information has smoothness characteristic where the luminance is flat and does not have where the luminance changes to prevent the halo artifact. Additionally, the estimated illumination information and surrounding pixel values are considered when the tone mapping function is applied to overcome the limitations of the conventional tone mapping function approach. Experimental results show that the proposed algorithm outperforms the conventional methods on objective and subjective criteria.

• Journal of Korea Multimedia Society
• /
• v.15 no.1
• /
• pp.9-17
• /
• 2012

Recently, a new image appearance model, named iCAM06, was developed for High-Dynamic-Range (HDR) image rendering. The dynamic range of a HDR image needs to be mapped on the range of output devices, which is called the tone reproduction or tone mapping. The iCAM06, the representative HDR rendering algorithm also uses the tone compression using a S-curve mapping function for image reproduction on the dynamic range of output devices. However the iCAM06 occurs white point shift during its tone compression process. Therefore, we propose a compensation method for white point shift problem using the corrected channel gain function. Experiment results show that the proposed method has better performance than the iCAM06.

• 전자공학회논문지 IE
• /
• v.48 no.2
• /
• pp.32-39
• /
• 2011

The output image of the uncooled thermal infrared camera is difficult the identification of target because of the limited dynamic range and the various noises. Retinex algorithm based on the theory of the human visual perception is known to be effective contrast enhancement technique. However, the image quality is insufficient when it is adopted to the narrow dynamic range image as the infrared image. In this paper, we propose the revised retinex algorithm to enhance the contrast of the infrared image. To improve the contrast enhancement performance, we designed the new dynamic range compression function instead of log function. To reduce the noise and compensate the loss of edge, we added the contrast compensation procedure in the MSR image generation process. According to the output picture comparing and numerical analysis, the proposed algorithm shows the better contrast enhancement performance and the more suitable method for the infrared image enhancement.