• Transactions of the Korean hydrogen and new energy society
• /
• v.32 no.5
• /
• pp.293-298
• /
• 2021

To synthesize Fe/Ni nanocatalysts loaded on carbon black, Iron(II) acetylacetonate and nickel (II) acetylacetonate and were reduced to Fe and Ni metallic nanoparticles by a spontaneous reduction reaction. The distribution of the Fe and Ni nanoparticles was observed by transmission electron microscopy, and the loading weight of Fe/Ni nanocatalysts on the carbon black was measured by thermogravimetric analyzer. The elemental ratio of Fe and Ni was estimated by energy dispersive x-ray analyzer. It was found that the loading weight of Fe/Ni nanoparticles was 6.23 wt%, and the elemental ratio of Fe and Ni was 0.53:0.40. Specific surface area was measured by BET analysis instrument and I-V characteristics were estimated.

• Transactions of the Korean hydrogen and new energy society
• /
• v.32 no.5
• /
• pp.285-292
• /
• 2021

To study the effect of the mixture ratio of Ni-Pt nanocatalysts on water electrolysis characteristics in anion exchange membrane system, Ni-Pt nanocatalysts were loaded on carbon black by using a spontaneous reduction reaction of acetylacetonate compounds. The loading weight of Ni-Pt nanocatalysts on the carbon black was measured by thermogravimetric analyzer and the elemental ratio of Ni and Pt was estimated by energy dispersive x-ray analyzer. It was found that the loading weight of Ni-Pt nanoparticles was 5.36-5.95 wt%, and the loading weight increased with increasing Pt wt%. As the Ni-Pt loading weight increased, the specific surface area decreased, because Ni-Pt nanoparticles block the pores of carbon black. It was confirmed by BET analysis and dynamic vapor sorption analysis. I-V characteristics were estimated.

• Transactions of the Korean hydrogen and new energy society
• /
• v.33 no.3
• /
• pp.202-208
• /
• 2022

Pt-Ni nanocatalysts were loaded on carbon black by spontaneous reduction reaction of platinum (II) acetylacetonate and nickel (II) acetylacetonate, and they were characterized by transmission electron microscopy (TEM), thermogravimetric analyzer (TGA), energy dispersive x-ray analyzer (EDS), BET surface area and fuel cell test station. The distribution of the Pt and Ni nanoparticles was observed by TEM, and the loading weight of Pt-Ni nanocatalysts on the carbon black was measured by TGA. The elemental ratio of Pt and Ni was estimated by EDS. It was found that the loading weight of Pt-Ni nanoparticles was 5.54 wt%, and the elemental ratio of Pt and Ni was 0.48:0.35. Specific surface area was measured by BET analysis instrument and I-V characteristics were estimated.

• Transactions of the Korean hydrogen and new energy society
• /
• v.35 no.2
• /
• pp.185-194
• /
• 2024

Fe-Ni nanocatalysts loaded on carbon black were prepared via spontaneous reduction reaction of iron (II) acetylacetonate and nickel (II) acetylacetonate in dry process. Their morphology and elemental analysis were characterized by scanning electron microscopy, transmission electron microscopy (TEM), and energy dispersive X-ray analyzer. The loading weight of the nanocatalysts was measured by thermogravimetric analyze and the surface area was measured by BET analysis. TEM observation showed that Fe and Ni nanoparticles was well dispersed on the carbon black and their average particle size was 4.82 nm. The loading weight of Fe-Ni nanocatalysts on the carbon black was 6.83-7.32 wt%, and the value increased with increasing iron (II) acetylacetonate content. As the Fe-Ni loading weight increased, the specific surface area decreased significantly by more than 50%, because Fe-Ni nanoparticles block the micropores of carbon black. I-V characteristics showed that water electrolysis performance increased with increasing Ni nanocatalyst content.

• Transactions of the Korean hydrogen and new energy society
• /
• v.34 no.5
• /
• pp.421-430
• /
• 2023

Fe-Ni-Pt nanocatalysts were loaded on carbon black powders which were synthesized by a spontaneous reduction reaction of iron (II) acetylacetonate, nickel (II) acetylacetonate and platinum (II) acetylacetonate. The morphology and the loading weight of Fe-Ni-Pt nanoparticles were characterized by transmission electron microscopy and thermogravimetric analyzer. The amount of Fe-Ni-Pt catalyst supported on the carbon black surface was about 6.42-9.28 wt%, and the higher the Fe content and the lower the Pt content, the higher the total amount of the metal catalyst supported. The Brunauer-Emmett-Teller Analysis (BET) specific surface area of carbon black itself without metal nanoparticles supported was 233.9 m²/g, and when metal nanoparticles were introduced, the specific surface area value was greatly reduced. This is because the metal nanocatalyst particles block the pore entrance of the carbon black, and thereby the catalytic activity of the metal catalysts generated inside the pores is reduced. From the I-V curves, as the content of the Pt nanocatalyst increased, the electrolytic properties of water increased, and the activity of the metal nanocatalyst was in the order of Pt > Ni > Fe.

• Proceedings of the Optical Society of Korea Conference
• /
• 2006.07a
• /
• pp.119-120
• /
• 2006

• Proceedings of the Korean Vacuum Society Conference
• /
• 2006.08a
• /
• pp.180-180
• /
• 2006

• Journal of the Korean Electrochemical Society
• /
• v.17 no.3
• /
• pp.164-171
• /
• 2014

A highly sensitive and selective non-enzymatic glucose sensor has gained great attention because of simple signal transformation, low-cost, easily handling, and confirming the blood glucose as the representative technology. Until now, glucose sensor has been developed by the immobilization of glucose oxidase (GOx) on the surface of electrodes. However although GOx is quite stable compared with other enzymes, the enzyme-based biosensors are still impacted by various environment factors such as temperature, pH value, humidity, and toxic chemicals. Non-enzymatic sensor for direct detecting glucose is an attractive alternative device to overcome the above drawbacks of enzymatic sensor. Many efforts have been tried for the development of non-enzymatic sensors using various transition metals (Pt, Au, Cu, Ni, etc.), metal alloys (Pt-Pb, Pt-Au, Ni-Pd, etc.), metal oxides, carbon nanotubes and graphene. In this paper, we show that Ni-based nano-particles (NiNPs) exhibit remarkably catalyzing capability for glucose originating from the redox couple of $Ni(OH)_2/NiOOH$ on the surface of ITO electrode in alkaline medium. But, these non-enzymatic sensors are nonselective toward oxidizable species such as ascorbic acid the physiological fluid. So, the anionic polymer was coated on NiNPs electrode preventing the interferences. The oxidation of glucose was highly catalyzed by NiNPs. The catalytically anodic currents were linearly increased in proportion to the glucose concentration over the 0~6.15 mM range at 650 mV versus Ag/AgCl.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.231-231
• /
• 2010

아직까지 국내에서 사용하는 대부분의 에너지는 화석연료에 의존하고 있다. 지하자원에서 나오는 석탄, 석유와 같은 화석연료는 다른 에너지원에 비해 운송이 간편하고 쉽게 이용할 수 있는 장점이 있지만, 환경오염의 문제성과 오일가상승, 자원의양 및 저장장소가 한정되어 있다는 단점을 가지고 있다. 이에 따라 수소와 같은 대체에너지를 이용하여 환경오염을 예방하고 무한히 사용할 수 있는 에너지원을 개발하기 위한 대체 방안들이 연구되고 있다. 폐기물 가스화시 발생되는 합성가스(CO, $CO_2$, $CH_4$, $H_2$) 내 일차로 생성된 일산화탄소는 수증기와 반응함으로써 이산화탄소로 전환이 가능하다. 잔류 메탄은 이산화탄소를 이용하여 개질함으로써 합성가스내 수소농도를 높일 수 있다. 전환된 잔류가스(CO, $CO_2$, $H_2$)내 일산화탄소는 산소를 이용하여 이산화탄소로 산화시킬 수 있으며, 산화된 이산화탄소는 흡착제를 이용하여 제거가 가능하다. 본 연구에서는 실제 가스화시 발생되는 합성가스를 이용하기 위하여, RPF가스화시 발생되는 합성가스를 직접 포집하여 실험을 진행하였다. 합성가스내 소량의 메탄은 니켈촉매를 이용하여 수소로 전화시켰으며, 잔류하는 일산화탄소는 백금촉매, 이산화탄소는 탄산나트륨 흡착제를 이용하여 연속적으로 제거함으로써 순수한 수소를 제공하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.356-356
• /
• 2011

탄소나노튜브(CNT)는 기계적, 전기적, 열적성질이 매우 우수하여 다양한 응용이 기대되고 있다. CNT를 금속기판에 직접 합성시킬 경우 CNT와 금속기판의 계면에서 높은 전도성 및 물리적 접착 강도를 기대할 수 있어서, 전계방출(field emission) 소자 또는 방열(heat dissipation) 소자 등과 같은 CNT의 높은 전도성과 일차원적 구조를 이용하고자 하는 분야로의 응용가능성을 높일 수 있다. 본 연구에서는 CNT의 합성촉매로 주로 사용되고 있는 니켈을 주요 성분으로 함유하고 있는 Inconel, Hastelloy, Invar 등을 합성기판으로 선정하여, CNT의 합성 거동을 조사하였다. CNT 합성은 CVD방법을 이용하였으며, 아세틸렌가스를 원료가스로 이용하였다. 합성 전 기판의산화 전처리가 CNT합성 효율에 영향을 미치는 것을 확인하였으며, 이를 체계적으로 조사하기 위하여, 다양한 온도(425~725$^{\circ}C$) 구간에서 산화 전처리를 실시한 후 CNT의 합성 거동을 조사하였다. 산화과정에 의한 표면구조의 변화 및 표면에서 금속성분의 재배열이 CNT합성 효율 변화의 원인으로 사료되고 있으며, 이를 분석하기 위해서, AFM, XRD, EDS, SEM, TEM 등을 이용하였다. 본 연구결과는 향후 전자방출소자, X-ray source 및 방열소자 등의 응용에 유용할 것으로 기대된다.