• Journal of Digital Convergence
• /
• v.16 no.7
• /
• pp.393-400
• /
• 2018

I would like to design a customized furniture for one-person households that have emerged as mainstream in modern society. In particular, I focused on the tendency of generations to improve the quality of life, and wanted to design the aesthetic furniture close to art furniture. To this end, I look at art furniture in domestic and overseas furniture. and present the concept of combined custom design based on current trends. The combined custom design differs from the existing one by creating separate designs for each part and fusing them to enable more diverse and aggressive molding. This is in harmony with the active tendency of one-person households who shows a lot of interest in the quality of life. Especially, it is suitable for small quantity production of various kinds, so it can be produced in the existing craft workshop system, and the two tables can confirm the possibility of the morphological concept according to actual combined custom design.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.9
• /
• pp.28-36
• /
• 2002

As cross-coupling capacitance generated in transmission line has been an important issue in VLSI world, a couple of ATPG algorithms has been proposed. However they were studied only for a simple single-line effect problem, so it cost so much time for an unsatisfying test generation efficiency. In this paper, we studied a noise model for multiple affected lines and generated test patterns in a short time. This paper proposes a crosstalk model affected by multiple tranmission lines and implemented an ATPG algorithm for detection of crosstalk noise faults. We modeled the crosstalk noise by multiple transmission line and made a truth table for this. We implemented an ATPG algorithm based on PODEM and revealed the results.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.1867-1872
• /
• 2010

본 연구에서는 1980년부터 2008년까지의 재해역학조사센터(http://www.emdat.be/)의 자료를 활용하여, 북한지역의 홍수로 인한 피해를 조사하였다. 북한의 홍수 발생 기간 중 약 70%가 주로 7월과 8월에 발생하였으며, 홍수로 인한 총 재산피해는 약 180억 달러에 달한다. 이중 1995년의 홍수는 약 150억 달러로 세계 50대 자연재해로 기록되었다. 또한, 2007년의 홍수는 북한의 자연재해 중 가장 많은 인명피해로 당시 사망자는 600명 이상이 기록되었다. 북한의 홍수 유형별 피해 규모를 분석하기 위하여 홍수 유형을 불특정 홍수, 돌발 홍수, 일반 홍수로 분류하여 분석하였다. 또한, 남북한의 차이를 분석하기 위하여 남한의 홍수 사례를 같은 유형으로 분류하여 함께 비교하였다. 유형별 빈도는 남한의 경우 3가지 유형이 비슷한 빈도로 발생된 반면, 북한의 경우 일반홍수의 빈도가 다른 홍수의 빈도 보다 조금 많이 발생하였다. 유형별 인명피해 부분에서는 남한은 전체 유형에서 돌발홍수가 52%로 가장 많은 부분을 차지했으며, 북한의 경우는 일반홍수가 42%로 가장 많이 차지하였다. 결론적으로 남한은 일반홍수와 돌발홍수의 빈도는 같았으나, 돌발홍수가 인명피해 면에서 2.3배 많이 발생하였으며, 북한의 경우 불특정 홍수와 돌발홍수의 발생 빈도는 같았으나, 돌발홍수로 인한 인명피해가 1.5배 많이 발생하였다. 경제적 피해 부분에서는 남한의 경우 돌발홍수가 약 19억 달러로 가장 많은 피해액을 발생시켰으며, 북한의 경우 일반홍수가 약 153억 달러로 가장 많은 피해액을 발생시켰다. 이는 남한의 약 7배에 해당하는 금액이다. 남북한이 경제적 피해 부분에서 큰 차이를 보이는 것은 1995년의 대홍수의 피해액이 약150억 달러로 기록되었기 때문으로 사료된다. 향후 기후변화로 인하여, 자연재해는 더욱 증가할 것으로 생각된다. 남한의 연구뿐만 아니라 한반도 전체에 대한 연구가 필요하다. 현재, 북한의 경우 기상 현상, 재해정보 등의 연구 자료는 남한 지역의 연구에 비해 상대적으로 많이 부족하며, 매우 제한적이고 단편적인 자료들만 존재하고 있다. 따라서 이에 관한 많은 연구들이 필요한 실정이다. 현재 작성되어 있는 북한의 재해 취약성 지도를 좀 더 연구하여, 한반도 전체의 재해 취약성 지도의 작성이 필요할 것으로 생각된다. 또한, 한반도 지역에서 발생하는 위험기상에 따른 사회경제적 피해를 줄이고 능동적으로 대처하기 위해 남북간 기상협력이 활성화 될 필요가 있을 것으로 생각된다.

• Journal of Korea Society of Industrial Information Systems
• /
• v.20 no.4
• /
• pp.11-23
• /
• 2015

In this paper, we propose a communication middleware for development of HACCP(Hazard Analysis and Critical Control Point) automation system, which is composed of lightweight devices and a server, to support effective HACCP data management. To provide the proper HACCP data to lightweight devices, we design the communication message protocol based on HACCP management regulation model. Moreover, we develop the communication middleware that performs various functions, such as processing of communication protocols for HACCP data, analyzing of messages between devices and a server, and providing database managements tools. In addition, it takes a role to guarantee sharing consistent data among the devices and server, through the active updates for information on devices. Actually, the proposed communication middleware can be a part of critical system to develop a HACCP automation system with lightweight devices, because it implements the HACCP communication protocols making lightweight devices execute every HACCP task.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.6B
• /
• pp.406-415
• /
• 2005

The standards which use shared medium like IEEE 802.11 wireless LAN have transmission opportunity by contention in contention period. If there are collisions in contention period, medium access control protocol may solve problem by using backoff algorithm. Backoff algorithm is important part in medium access control, but legacy backoff method which is used under IEEE 802.11 standards is not adjusted when load is heavy because of increasing collisions. In this paper, we propose a new load-based dynamic backoff algorithm in contention-based wireless shared medium to improve throughput of medium and to reduce the number of collisions. Proposed backoff algorithm can increase the network utilization about $20\%$ higher than that of binary exponential backoff algorithm.

• Journal of the Economic Geographical Society of Korea
• /
• v.17 no.1
• /
• pp.160-177
• /
• 2014

The cases of entrepreneurial universities who conduct enterprisers like activities are increasing continuously in these days. Entrepreneurial activities by universities include university enterprises establishment and management, direct and indirect investment, incubating startup businesses, and diverse university-industry cooperation. In this study, the roles and contributions of universities in the development of science parks are explored with a case of Zhongguancun in Beijing. In particular, the roles of four universities such as Peking, Tsinghua, Renmin, and Chinese Academy of Science were intensively focused and investigated. Interpretive case research methodology was adopted for this study and in-depth interview and secondary data analysis methods were used for the investigation. The result of this study suggests that universities can do essential roles in the development of science parks and can contribute to the development and growth of science parks through proactive and direct economic activities as well as traditional and defensive university-industry cooperation.

• Journal of Elementary Mathematics Education in Korea
• /
• v.17 no.3
• /
• pp.541-554
• /
• 2013

Recently, storytelling was emphasized in mathematics education for students to have interest in mathematics and active attitude about the mathematics. Storytelling can provide a meaningful mathematical context that motivates children to learning mathematics actively. And also, the power of storytelling for engaging children in mathematics learning was evident in the many research. According to this trend, the new mathematics textbook applying storytelling was developed. Already this textbook applying storytelling was used in grade 1-2 in 2013. Grade 3-4 will use this new textbook in 2014 and grade 5-6 will use new textbook in 2015. This study reviewed the mathematics educational meaning of storytelling and discussed the educational rationale of introducing the storytelling in mathematics education, and offered practical teaching method for applying storytelling in mathematics instruction.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.179-181
• /
• 2017

In this paper, we propose the contents of the visual content of the child's own boundaries and implement the contents based on active learning using touch method. The images consist of four modules, each of which consists of content developments, learning concepts, and learning content. The notion of sexual violence is also aimed at fostering awareness that sexual violence is also an extension of the child's safety. Moreover, the learning content of a learning game improves learning outcomes by receiving a 'compliment' if the game succeeds and receives a 'reward' on the game.

• Land and Housing Review
• /
• v.2 no.4
• /
• pp.407-413
• /
• 2011

This paper reports a novel structural health monitoring (SHM) technique for detecting de-bonding between a concrete beam and CFRP (Carbon Fiber Reinforced Polymer) sheet that is attached to the concrete surface. To achieve this, a multi-scale actuated sensing system with a self-sensing circuit using piezoelectric active sensors is applied to the CFRP laminated concrete beam structure. In this self-sensing based multi-scale actuated sensing, one scale provides a wide frequency-band structural response from the self-sensed impedance measurements and the other scale provides a specific frequency-induced structural wavelet response from the self-sensed guided wave measurement. To quantify the de-bonding levels, the supervised learning-based statistical pattern recognition was implemented by composing a two-dimensional (2D) plane using the damage indices extracted from the impedance and guided wave features.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.109-114
• /
• 2004

This paper presents a theoretical and experimental study of a non-collocated pair of piezopolymer PVDF sensor and piezoceramic PZT actuator, which are bonded on a cantilever beam, in order to suppress unwanted vibration at the tip of the beam. The PZT actuator patch was bonded near the clamped part and the PVDF sensor, which was triangularly shaped, was bonded on the other part of the beam. This is because the triangular PVDF sensor is known that it can detect the tip velocity of a cantilever beam. Because the arrangement of the sensor and actuator pair is not collocated and overlapped each other, the pair can avoid so called 'the in-plane coupling'. The test beam is made of aluminum with the dimension of $200\times20\times2mm$, and the two PZT5H actuators are both $20\times20\times1mm$ and bonded on the beam out-of-phase, and the PVDF sensor is $178mm\times6mm\times52{\mu}m$. Before control, the sensor-actuator frequency response function is confirmed to have a nice phase response without accumulation in a reasonable frequency range of up to 5000 Hz. Both the DVFB and displacement feedback strategies made the error signal from the tip velocity (or displacement) sensor is transmitted to a power amplifier to operate the PZT actuator (secondary source). Both the control methods attenuate the magnitude of the first two resonances in the error spectrum of about 6-7 dB.