• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.7
• /
• pp.12-21
• /
• 2002

In this paper, we propose a new hybrid ARQ scheme to consider real-time and non real-time services in a wireless ATM network. Real-time and non-real-time services require different error control schemes according to each service characteristics. Therefore, in the next generation mobile communication environments where these service scenarios should be deployed, hybrid ARQ scheme using RCPC code with variable coding rate becomes one of the most suitable solutions. Because the variable coding rate is applied according to traits of transmitted frame and channel status, hybrid ARQ scheme using RCPC code can expect UEP effect. The UEP scheme does not apply equal error protection level to all information, but does high error protection level to more important information. In Our scheme, UEP of high error protection level is applied to real-time service, and UEP of low error protection and retransmission techniques are applied to non real-time service. We show that the proposed hybrid ARQ scheme improves channel utilization efficiency and yields high error correction behaviors.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.5
• /
• pp.475-480
• /
• 2012

This study on the methode is easied to distinguish with emotional visual lighting on AtoN facility using 3colors LED, and which is controlled to on-off switching of approach light in shore or harbor. The identification have easied to provide a differentiation between the AtoN facility of red and white light and surrounding light in harbor both sides. And the integrated controller have designed to left-right and serial sequential lighting system for harbor guidance using the GPS synchronous or timer. There is expectation effect that is prevent a confusion about distinguish of facility by ship's operator and to beautify a night scene of harbor, which is expressed to emotional identification lighting and variable color lighting on AtoN body by vertical layer color lighting using LED. In addition, the performance of AtoN is implemented to display with guidance light the harbor safety message by morse code lighting. Effectiveness of system is enhanced that age and power consumption reduce by candle alternated high light LED.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.43 no.6 s.312
• /
• pp.16-26
• /
• 2006

In this paper, we propose a 3D shape restoration system which measures height and surface shape of transparent ITO glass and delivers errors in focal length and incident angle of laser beam to femto-second laser micromachining. The proposed system is composed of a line scan laser, a high resolution camera, a linear motion guide synchronized to image capturing, and a control station. Also, we define the sensitivity indices that represent a relation between measurement error and a position of a camera and scan laser, and utilize it for optimum design. The results of the proposed system are compared with results of SPM(Scanning Probe Microscope) and prove the usefulness of the system.

• Korean Chemical Engineering Research
• /
• v.47 no.1
• /
• pp.79-83
• /
• 2009

In this study, the characteristics of amorphous silicon etching for the formation of gate electrodes have been evaluated at the variation of several process parameters. When total flow rates composed of $Cl_2/HBr/O_2$ gas mixtures increased, the etch rate of amorphous silicon layer increased, but critical dimension (CD) bias was not notably changed regardless of total flow rate. As the amount of HBr in the mixture gas became larger, amorphous silicon etch rate was reduced by the low reactivity of Br species. In the case of increasing oxygen flow rate, etch selectivity was increased due to the reduction of oxide etch rate, enhancing the stability of silicon gate etching process. However, gate electrodes became more sloped according to the increase of oxygen flow rate. Higher source power induced the increase of amorphous silicon etch rate and CD bias, and higher bias power had a tendency to increase the etch rate of amorphous silicon and oxide.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.16 no.2
• /
• pp.130-137
• /
• 2013

The more accurate numerical analysis is needed, The more important to arrange nodes and elements properly on the structures wanted to be analyzed. In this study, automatic mesh generation method is developed for triangular mesh modeling in wind tower and substructure formed in circular sections especially, which have structural and economical benefits in shallow water area. It can consider variety conditions by inputting the detail data such as height and types. Also, this study includes the comparison and verification with the mesh generation by Delaunay triangular technique on 3 dimensional space and the examples of mesh generation for proposed tower and substructure. The result of this study will be widely applied to analyze the existing and proposed models for wind turbines.

• Journal of the Korean Vacuum Society
• /
• v.16 no.5
• /
• pp.366-370
• /
• 2007

Nano-scopic holes which are distributed densely and uniformly were fabricated on $SiO_2$ surface. Self-assembling resists were used to produce a layer of uniformly distributed parallel poly methyl methacrylate (PMMA) cylinders in a polystyrene (PS) matrix. The PMMA cylinders were degraded and removed by acetic acid rinsing. Subsequently, PS nanotemplates were fabricated. The patterned holes of PS template were approximately $8{\sim}30\;nm$ wide, 40 nm deep, and 60 nm apart. The porous PS template was used as a dry etching mask to transfer the pattern of PS template into the silicon oxide thin film during reactive ion etching (RIE) process. The sizes of the patterned holes on $SiO_2$ layer were $9{\sim}33\;nm$. After pattern transfer by RIE, uniformly distributed holes of which size were in the range of $6{\sim}22\;nm$ were fabricated on Si substrate. Sizes of the patterned holes were controllable by PMMA molecular weight.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.6
• /
• pp.603-611
• /
• 2016

Research and development of mineral-resource-related products has progressed with the increased need to develop mineral resources. The DTH hammer is a resultant product. However, owing to particular work conditions of underground drilling, it is difficult to obtain direct data on the DTH hammer. A DTH drill rig requires a significant amount of money and time for actual testing. This thesis aimed to resolve this problem by using CAE. In a previous paper, the structure of the DTH hammer and its movement were analyzed, and a standard model based on simulation was proposed. Then, experimentation and comparison verification were conducted. In this paper, by using an experimental design method, we derived a control factor of the impact force and efficiency of the DTH hammer and attempted to optimize the design. As a result, the impact energy increased by 14.9%, and the efficiency increased by 3.3%.

• Fire Science and Engineering
• /
• v.28 no.6
• /
• pp.69-75
• /
• 2014

Recently Amore pacific rack-type warehouse fire broke out and argue an urgent improvement of fire protection design code including automatic sprinkler and detection design. Various type of commodities have their unique fire characteristics from fire spread rate and heat lease rate and fire hazard depends on storage height, rack arrangement, aisle width, fire load etc. With increasing ceiling height for more storage space prevent effective water spray of sprinkler head, also delays detection time causes failure of early suppression. To achieve fire protection code performance of this occupancy, Major code articles relating to a classification of commodity, sprinkler system installation, detection and fire fighting are reviewed and suggested based on fire case analysis, code review between country and field survey.

• Applied Chemistry for Engineering
• /
• v.20 no.2
• /
• pp.191-194
• /
• 2009

Porous alumina prepared by anodization has been widely studied since it shows very regular nanostructures at inexpensive prices. In this article, porous alumina is obtained by anodization of aluminum in the oxalic acid. After the first formed oxide is selectively removed from the aluminum substrate, the hexagonal nanostructures on the fresh aluminum are converted to nanodots by the second anodization in boric acid. Nanodots are arrayed in the convex of the hexagonal nanostructures. The optimization condition for the fabrication of nanodots with a height of 20 nm is investigated in detail. Subsequently, a gold film is deposited on the nanodots, resulting in the formation of gold nanodots arrays which are probably interesting substrate for biosensor applications.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.186-186
• /
• 2011

태양전지의 효율을 증가시키기 위해서는 표면에서의 Fresnel 반사를 줄여 입사된 빛이 흡수층까지 잘 도달되도록 해야 한다. 그러나 결정질 실리콘의 경우, 굴절률이 높아 32% 이상의 표면반사율을 보이고 있어, 실리콘 태양전지 표면에 단일 또는 다중 박막의 무반사 코팅을 통해 반사율을 낮추는 방법이 널리 사용 되어 오고 있었다. 하지만, 이와 같은 코팅 방법은 열적팽창 불일치, 물질 선택의 어려움뿐만 아니라 낮은 반사율을 포함하는 파장 및 빛의 입사각 영역의 제한 등 여러 문제점을 지니고 있다. 이러한 문제점을 보완하기 위해, 표면에 서브파장의 주기를 갖는 나노구조(subwavelength structure, SWS)의 형성에 관한 연구가 활발히 진행되고 있다. 습식 식각보다 건식 식각을 이용한 SWS 제작 방법이 표면 profile을 제어하기 용이하나 패턴 형성을 위해 식각 마스크가 필요하다. 최근, 복잡하고 고가의 전자빔 또는 나노임프린트를 이용한 패턴 형성보다, 간단/저렴하며 대면적 제작이 용이한 금속 나노입자 마스크를 이용한 SWS의 제작에 대한 연구가 활발히 진행되고 있다. 또한 SWS의 무반사 특성은 표면 profile에 따라 크게 영향을 받는다. 따라서 본 실험에서는 열적 응집현상에 의해 형성되는 self-assembled Pt 나노입자 식각 마스크 및 $SiCl_4$가스를 사용한 유도결합 플라즈마(inductively coupled plasma, ICP) 장비를 이용하여 무반사 실리콘 SWS를 제작하였으며, SWS 표면 profile에 따른 구조적 및 무반사 특성을 조사하기 위해 다양한 공정조건을 변화시켰다. 실리콘 기판 위의 Pt 박막은 전자빔 증착(e-beaml evaporation)법을 사용하였고, 급속 열처리(RTA)를 통해 Pt 나노입자의 식각 마스크를 형성시켰다. Pt 나노입자들의 패턴 및 제작된 무반사 실리콘 SWS의 식각 profile은 scanning electron microscope를 사용하여 관찰하였으며, UV-VIR-NIR spectrophotometer를 사용하여 350~1050 nm 파장 영역에서의 반사율을 측정하였다. ICP 식각 조건을 변화시켜 5% 이하의 낮은 반사율을 갖는 높이가 높고 쐐기 형태의 실리콘 SWS를 도출하였다.