• Tunnel and Underground Space
• /
• v.9 no.1
• /
• pp.64-71
• /
• 1999

A numerical analysis was performed to investigate the effects of notched blasthole in controlling the fracture plane. Analyzed were elastic and elasto-plastic response of rock, and fracture propagation under static and dynamic load conditions. Results showed that the region exceeding the tensile strength extended up to three times the radius of a normal blasthole in elastic analysis, while fifteen times in elasto-plastic analysis. It was shown that a crack was driven from the notch tip up to the distance of 23 times the hole radius in the case of a notched blasthole with a notch of 5 mm in depth and 30 mm in length.

• Journal of the Korean Institute of Gas
• /
• v.27 no.2
• /
• pp.95-103
• /
• 2023

In this paper, in order to evaluate the deformation characteristics of the hydrogen gas storage vessel(Type 1) when considering gas pressure, the VMS generated in the hydrogen gas storage vessel according to the notch shape of ISO 18119 was interpreted as a FEM(Finite Element Method). According to the analysis results, the maximum VMS generated in the longitudinal notch was higher than the transverse notch. In addition, the stress of the storage vessel was analyzed by the stress ratio, which is the yield strength ratio of the material to the VMS generated. According to the analysis results, in the case of a storage vessel with a notch formed in the longitudinal direction, the inside and outside of the storage vessel increased to 0.85 and 0.50 at a gas pressure of 50 MPa, respectively, but were analyzed to be lower than 1.

• Journal of the Korea Concrete Institute
• /
• v.13 no.2
• /
• pp.161-167
• /
• 2001

It is difficult to obtain accurate fracture toughness values using three point bending test(TPB) proposed by RILEM committees because the shape of load-deflection curve is irregular and final crack propagation occurs after some slow stable cracking. However, fracture toughness is easily obtained from crack initiation load in the disk test. In this paper, the fracture properties of high strength concrete disks with center-crack was investigated. For this purpose, the experimental results were compared with the results by finite element analysis(FEA). And the experimental fracture locus was compared with theoretical fracture locus. Also, the results of fracture properties for the degree of concrete strength are presented. It is concluded from this study that results from FEA with maximum stress theory were compared well with the results from experiment. And the degree of concrete strength was contributed to the crack initiation load and fracture toughness, but was not contributed to the failure angle. Also, The discrepancy of fracture locus between the maximum stress theory and the experiment for concrete is considered to depend upon a large energy requirement for inducing the mixed-mode and sliding mode fractures.

• Journal of the KSME
• /
• v.29 no.2
• /
• pp.118-124
• /
• 1989

피로파괴의 발생원인을 살펴보면 다음과 같이 4가지로 구별된다. (1) 설계불량 (2) 가공불량 (3) 소재불량 (4) 부적절한 사용 그러나 현재 기계설계시 일반적으로 형상계수 및 충격계수를 포함한 안전율을 여유있게 고려하기 때문에 피로강도가 간접적으로 설계시 반영되어 피로파괴는 주로 가공이나 원소재 불량 및 사용상의 부주의에 의한 경우가 대부분이다. 즉 기계가공 도중에 노치가 유입되어 응력집중을 발생시키거나, 규정된 표면처리 혹은 열처리가 이루어지지 못해서 재료의 피로강도가 저하한 경우가 많으며, 소재 역시 비금속 개재물이 다량 함유되어 있거나 열처리 특성이 조악한 소재가 사용되어 요구되는 강도를 확보하지 못한 경우도 많다. 그 반면 사용자 측에서도 설계강도를 무시한 과부하를 인가하거나, 부식환경 혹은 고온에서 사용하여 피로파괴를 촉진시키는 경우도 있으므로 사용자도 설계조건을 인식하여 그 한계를 넘지 않도록 해야 한다. 피로파괴는 단순한 원인에 의한 경우가 적고 복잡한 여러 형상이 중첩되는 경우가 많기 때문에 해석하기 어려운 경우가 많다. 결국 피로 파괴의 방지는 피로강도를 저하시킬 수 있는 요인들을 종합하여 설계단계에서부터 최종 사용단계까지 지속적인 관리에 의해서만 달성 될 수 있다.

• Journal of Welding and Joining
• /
• v.16 no.4
• /
• pp.73-82
• /
• 1998

This paper is especially concerned with the weldment between support beam and square bar that plays important roles in control box of Expansion Joint as a brdige structure. Fatigue strength ({TEX}$$\sigma$_{ult}${/TEX}) of the weldment is dependent on notch factor ({TEX}$K_{f}${/TEX}) become important factors to predict fatigue life. The fatigue notch sensitivity (η) for metals can be divided into two types ; high and low notch sensitivity. In this work, the Expansion Joint weldment was found to have low notch sensitivity. The maximum strain distribution during static loading is similar to the FEM analysis. Fatigue test of real structure was performed up to {TEX}$10^{6}${/TEX} cycles to be compared with predicted endurance limit.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.2
• /
• pp.111-118
• /
• 2020

In this paper, the flexural creep behavior of hooked-end steel fiber reinforced high-strength concrete was evaluated to investigate the steel fiber content influence on long-term behavior of flexural members. An experimental program consisted of nine prismatic beam specimens with dimensions of 150 × 150 × 600mm reinforced with different contents of steel fiber (0, 0.75 and 1.5% at the volume fraction). To introduce flexural creep loading to notched prismatic beam specimens, a four-point bending test setup was used. The sustained load with 40% of the flexural strength was applied by means of a lever system and controlled by a load cell for 90 days. During sustained loading, crack mouth opening displacement (CMOD) was monitored. Conventional flexural test after creep tests were carried out to evaluate the residual capacity of each specimen. Test results showed that steel fiber content has a significant effect on the flexural creep behavior of high-strength concrete and long-term flexural load with 40% of flexural strength doesn't generate negative effects on the residual capacity of steel fiber reinforced high-strength concrete.

• Polymer(Korea)
• /
• v.35 no.3
• /
• pp.203-209
• /
• 2011

Two smooth and textured surfaced HDPE geomembranes (GMs) were cut into dumbbell shape and notched where depth of the notch produced a ligament thickness of 10% to 90% of the nominal thickness with the specimen at 10% interval. A series of laboratory simulation test for installation damage were carried out at different loading cycles on HDPE GMs in accordance with ISO 10722 test method and the effect of number of loading cycle on installation damage was compared. It was found that yield stress and elongation at yield point decreased gradually as the notch depth was increased. Both installation damaged and notched, GMs were used to understand stress crack behavior and this behavior was observed through NCTL test at $50{\pm}1^{\circ}C$ at different yield stresses immerging in pH 4 and pH 12 buffer solutions. Over 35% tensile load, GMs became vulnerable to stress cracking. Both damaged and notched GMs showed the same trend. Especially, notched GMs showed less strength than installation damaged GMs at every stress cracking test condition.

• Journal of the Korean Institute of Gas
• /
• v.16 no.4
• /
• pp.16-22
• /
• 2012

The use of welding process has been increased for manufacture of machine, bridges, ships, gas facilities and so on together with development of welding technique. Accordingly, it has been needed to develop the welding methods considering higher productivity and safety design for manufacture of their welding structures. In this study, it was studied basically on characteristics of fatigue strength and fatigue life in full penetrated cruciform fillet weld zone in relation to material thickness, welding passes, loading direction and notch radius of toe zone. Most of fatigue failure occurred in toe zone of cruciform fillet weld joint. Fatigue strength and fatigue life are under the influence of stress concentration due to notch radius and flank angle of toe zone. The metal of toe zone annealed and diffused by multi-layer welding and acicular ferrite structure formed by the result improved fatigue strength and fatigue life.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.476-479
• /
• 2011

티타늄 합금은 높은 내부식성, 우수한 피로 수명과 무게비에 비해 높은 강도를 가진다는 우수성으로 인해 항공기 부품과 화학 공업 분야등에 다양하게 사용되고 있다. 이번 연구에서는 Ti-3Al-2.5V 합금 TIG 용접부에 대하여 용접부 인성과 기계적 성질에 영향을 주는 가장 중요한 인자인 용접 입열에 대한 영향을 평가하고자 하였다. 이에 입열조건에 대한 용접부에 대한 강도, 충격 인성과 노치 인성을 평가하였으며 적정 입열 조건에서 강도와 인성이 우수한 용접부를 얻을 수 있다는 것을 확인하였다.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2001.11a
• /
• pp.349.2-363
• /
• 2001

안전성의 측면에서 기계설비 및 구조물의 파손을 유발할 수 있는 재료손상에 대한 평가는 매우 중요하기 때문에, 사용 목적에 부합되는 우수한 첨단재료의 개발과 그 특성을 파악할 필요성이 있다 그 중에서 섬유강화 복합재료는 금속재료보다 높은 비강도와 비강성을 가지며 적층각도, 적층순서 및 경화방법에 따라서 원하는 강도와 강성을 가질 수 있다 특히, 탄소섬유강화복합재료(CFRP)는 스포츠용품에서 최신 항공기의 구조재료에 이르기까지 경량화 관점에서 기존의 재료를 대체해 나가고 있다.(중략)