• Journal of Aerospace System Engineering
• /
• v.16 no.1
• /
• pp.49-55
• /
• 2022

The role of drones has been expanded to various fields such as agriculture, construction, and logistics. In particular, agriculture drones are emerging as an effective alternative to solve the problem of labor shortage and reduce the input cost. In this study therefore, we proposed the fruit recognition algorithm and harvesting mechanism for fruit harvesting drone system that can safely harvest fruits at high positions. In the fruit recognition algorithm, we employ "You-Only-Look-Once" which is a deep learning-based object detection algorithm and verify its feasibility by establishing a virtual simulation environment. In addition, we propose the fruit harvesting mechanism which can be operated by a single driving motor. The rotational motion of the motor is converted into a linear motion by the scotch yoke, and the opened gripper moves forward, grips a fruit and rotates it for harvesting. The feasibility of the proposed mechanism is verified by performing Multi-body dynamics analysis.

• Journal of Appropriate Technology
• /
• v.5 no.2
• /
• pp.70-81
• /
• 2019

The garment industry is one of the most labor-intensive manufacturing industries, with its sewing process relying almost entirely on manual labor. Its costs highly depend on the efficiency of this production line and thus is crucial to determine the production rate in real-time for line balancing. However, current production tracking methods are costly and make it difficult for many Small and Medium-sized Enterprises (SMEs) to implement them. As a result, their reliance on manual counting of finished products is both time consuming and prone to error, leading to high manufacturing costs and inefficiencies. In this paper, a production tracking system that uses the sewing machines' energy consumption data to track and count the total number of sewing tasks completed through Convolutional Neural Network (CNN) classifiers is proposed. This system was tested on two target sewing tasks, with a resulting maximum classification accuracy of 98.6%; all sewing tasks were detected. In the developing countries, the garment sewing industry is a very important industry, but the use of a lot of capital is very limited, such as applying expensive high technology to solve the above problem. Applied with the appropriate technology, this system is expected to be of great help to the garment industry in developing countries.

• Korea Trade Review
• /
• v.43 no.3
• /
• pp.1-26
• /
• 2018

This study estimates the technical efficiency and total factor productivity(TFP) of and analyzes the relationship between TFP and exports for Korean manufacturing companies from 2000 to 2016. Specially, TFP is decomposed into Technical Change(TC), Technical Efficiency Change (TEC), and Sale Effect(SE), and compared between large and small enterprises. First, in the case of technical efficiency, the Korean economy has been very vulnerable to external shocks, such as the sharp decline following the 2008 financial crisis. The efficiency of the electronics, automobile, and machinery sectors is low and needs to be improved. In addition, the technological efficiency of large enterprises is higher than that of SMEs in most manufacturing sub-sectors except for non-ferrous metals. In the case of TFP, most changes are due to TC, and the effective combination of labor, capital and the effect of scale have little effect, suggesting that improvement of internal structure is urgent. In addition, volatility due to the impact of the financial crisis in 2008 was much larger in SMEs than in large companies, so external economic impacts are more greater for SMEs than large enterprises. The relationship between TFP decomposition factors and exports shows that TC has a positive effect only on exports of SMEs. Therefore, in order to increase exports, in the case of SMEs, R&D support to promote technological development is needed. In the case of large companies, it is necessary to establish differentiated strategies for each export market, competitor company, and item to link efficiency and scale effect of exports.

• Korea Trade Review
• /
• v.41 no.5
• /
• pp.63-87
• /
• 2016

Despite its rising labor costs these days, China still serves the role as 'World's Factory' thanks to a great deal of foreign direct investment, still remaining one of the world's highest, and the global companies, which have been willingly establishing foreign subsidiaries in China. While enjoying the benefits from the Chinese market, these global companies can now take advantages of another market; the one of Korea. If a product produced by a certain global company is actually manufactured in the local factory in China and the product meets specifications of Rules of Origin, the product shall receive preferential treatment under China-Korea FTA. In the perspective of global market, therefore, it is found that China-Korea FTA may have negative effects on chemical industry in Korea, which is considered one of the representatives of China-Korea FTA. This study examines such risks by network analysis, with several cases of 'Beauty or Make-up Preparations (HS Code 3304).' Analysis shows that Korea is classified as the marginal country group but not main country group when it comes to beauty products family. So this can be a great chance to the global cosmetic companies with local factories in China in the sense that they can increase their sales towards the market of Korea based on the China-Korea FTA. Under these concerns, this study suggests two policy alternatives for the chemical industry in Korea to deal with current challenges rising from China-Korea FTA. The suggested alternatives are: to actively attract the global chemical corporations which are yet to directly enter the Chinese market; and to invest on chemical products with high potential of growth as a priority.

• Korean Journal of Social Welfare
• /
• v.69 no.4
• /
• pp.41-65
• /
• 2017

This study aimed to examine the social transition, which is often metaphorized as the Fourth Industrial Revolution, within the context of social work practice and to explore measures to improve social work practice in such transition. Four social welfare researchers held seven discussions to predict the social changes in the near future centered on the Fourth Industrial Revolution and find the corresponding development strategies in social work practice; collective autobiography method was used to analyze the discussion. The analysis ascertained hyper connectivity, the advent and expansion of new communities, diversification and individualization, and the emergence of new criteria for the assessment of one's quality of life as the distinctive qualities of the near future. It was analyzed that humans and organic materials will be interconnected through spatial and temporal transcendence and that humans liberated from labor will seek for diverse communities while the number of atomized individual will increase simultaneously. Furthermore, the rise of new order of life accompanied by both the expansion of diversification and individualization and the ecological worldview brought forth by post materialistic trend was predicted. Meanwhile, the disengagement from macroscopic context, a biased inclination towards technique orientated professionalism, and individualistic social work practices without integrity were identified as the limitations of the current social work practice. This study presented three goals for social work practice to help it overcome its current shortcomings and correspond to the social changes: first, the rearrangement of practice knowledge, technique, and value so that it is based on humans and society, which are the essence of social practice work; second, the practice, such as sharing economy, that expands the individuals' boundaries of life to the community; three, the restoration of the desirability of professional social works by examining its special nature.

• Korean Journal of Social Welfare
• /
• v.69 no.4
• /
• pp.9-33
• /
• 2017

This study aims to emphasize the importance of social inclusiveness for evaluation and future development of social policy in Korea. In particular, this study emphasizes that the future of social policy in Korea depends on the level of social inclusiveness. Social inclusiveness can be measured by the extent to which social policy is inclusive and the level of citizens' perception of social inclusiveness. This study uses 4 frameworks (universality, progressiveness, life-long, and adequacy) of inclusive asset-based policy to evaluate the level of social inclusiveness of key laws and social policies. Key findings are as follows: First, Korea has established normative systems of laws and social policies. Second, however, Korean social policy has multiple problems in universality, progressiveness, life-long, and adequacy. To enhance social inclusiveness of social policy, this study emphasizes the 'socialness' of social problems. Korea has faced market failure, the high level of rate experiencing poverty during life, and inefficiency of social policy. If we accept the socialness of social problems, social policy should attempt to increase publicness of social policy. The increase in socialness as well as social inclusiveness may be fundamental for inclusive society in Korea.

• Journal of agriculture & life science
• /
• v.50 no.4
• /
• pp.45-57
• /
• 2016

The average income of forestry household was only 54.3% of urban workers's and 67.6% of farms household's income based on the data from statistics Korea in 2012. This indicates that forestry, which is a labor-intensive primary industry, has the limitation for creating added value. On the other hand, the demands for forest healing and forest experiential program have been continuously increased with new lifestyle focusing on the quality of life and increased leisure time. Therefore, it is necessary to establish comprehensive policies to increase added value except forestry to respond forest demands. The project utilizing forest healing can be on of solutions to meet forest demands. Thus, this research intends to investigate an economic revitalization plan for mountain villages with forest healing. The characteristics of forest healing facilities and contents of forest healing programs were examined through internet searching, fields surveys, and expert interviews. Total 186 concepts, 8 categories, and 24 subcategories were derived from raw data of surveys. The application process of forest healing was also provided to encourage local economy of mountain areas. This research offers application procedure of the forest healing for regional economic vitalization in Mountain Villages interviews using grounded theory by Strauss and Corbin(1988) as well as NVio11. This research contributes to prepare the base of future quantitative studies by providing strategies and suggestions for the application plans of forest healing programs. In addition, this research offers basic data for the policies to establish and manage forest healing villages.

• Korea Science and Art Forum
• /
• v.19
• /
• pp.417-424
• /
• 2015

The healthcare service industry has become one of the business industries in South Korea where service design is most actively being researched on and applied. In accordance with the recent upsurge of the interest in health, healthcare service is expanding its area including disease prevention, patient management, and rehabilitation treatment as well as cure and nursing care. The health manpower is the supplier, and their professional knowledge and ability and the patients' trust in medical technology are the most important factors for their customers. In addition, service design has come into the spotlight given that the medical institute system, health manpower attitude, and information delivery system and touch point are considered important factors contributing to customer satisfaction. It is very hard to satisfy customers only through professionalism, the environment, and product improvement because healthcare service deals with much more sensitive and emotional customers compared to other service industries. This means that a change in the service mind-set and the attitude of the health manpower as emotional labourers have practical effects. Therefore, the fundamental solution is to establish a system that provides related education with manpower and that settles various problems by itself. This paper introduces several solutions, such as education for health manpower and a service design system applied to a national-university-affiliated hospital in South Korea, and takes a close look at its effects.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.2
• /
• pp.48-60
• /
• 2023

Although foxtail and broomcorn millet have been cultivated since the Neolithic Age on the Korean Peninsula, there have been few studies on how the importance of millet cultivation changed over time. The discovery of millet has been rare in the Mahan-Baekje villages in the Jeonnam region, and archaeological discussions on ancient farming have centered around rice farming. However, a large amount of millet was found at the Osan site in Bongrim-ri, Jangheung, showing that the tradition of millet cultivation continued during the AD 3-4 centuries. In contrast to rice farming, which requires low-lying wetlands, hot and humid summers, and a large labor force, millet cultivation has few restrictions in terms of growing environment and labor mobilization. Regarding harvesting seasons, the crops at the Osan site can be divided into fall harvesting (rice, legumes, millet) and summer harvesting (wheat). Regarding field locations, the crops are divided into wetland crops (rice) and dryland crops (wheat, legumes, millet). The operation of the dual agricultural system contributed to subsistence resilience and agricultural production, making it possible to effectively manage social and climatic crises.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.33 no.2
• /
• pp.171-187
• /
• 2023

Objectives: Aircraft cabin cleaning work is characterized by being performed within a limited time in a narrow and enclosed space. The objective of this study was to evaluate the exposure levels to dust, ultra fine dust(PM2.5) and black carbon(BC) among aircraft cabin cleaners. Methods: Active personal air sampling for respirable dust(n=73) and BC(n=47) was conducted during quick transit cleaning(cabin general and vacuum-specific) and seat cover replacement and total dust and PM2.5 were area-air-sampled as well. Also, size distribution of particle was identified with the cleaning workers targeted. Dusts were collected with PVC filters using gravimetric analysis. The concentration of PM2.5 and the particle size distribution were measured with real-time direct reading portable equipment using light scattering analysis. The concentration of BC was measured by aethalometer(filter-based real-time light absorption analysis instrument). Results: The geometric mean of respirable dust was the highest at vacuum cleaning as 74.4 ㎍/m³, following by replacing seat covers as 49.3 ㎍/m³ and cabin general cleaning as 47.8 ㎍/m³ . The arithmetic mean of PM2.5 was 4.83 ~ 9.89 ㎍/m³ inside the cabin, and 28.5~44.5 ㎍/m³ outside the cabin(from bus and outdoor waiting space). From size distribution, PM_2.5/PM₁₀ ratio was 0.54 at quick transit cleaning and 0.41 at replacing seat covers. The average concentration of BC was 2~7 ㎍/m³, showing a high correlation with the PM2.5 concentration. Conclusions: The hazards concentration levels of aircraft cabin cleaners were very similar to those of roadside outdoor workers. As the main source of pollution is estimated to be diesel vehicles operating at airports, and it is necessary to replace older vehicles, strengthen pollutant emission control regulations, and introduce electric vehicles. In addition, it is necessary to provide as part of airport-inftastructure a stable standby waiting space for aircraft cabin cleaners and introduce a systematic safety and health management system for all workers in the aviation industry.