• 전자공학회논문지 IE
• /
• v.44 no.1
• /
• pp.6-9
• /
• 2007

Twenty four types of thermopile for micro spectrometer infrared sensors were fabricated on low-stress Si3N4 membranes with $l.2{\mu}m-thickness$ using MEMS technology. Thermopile were designed and fabricated for optimum conditions by five parameters of thermocouple numbers $(16\sim48)$, thermocouple line widths $(10{\mu}m-25{\mu}m)$, thermocouple lengths $(100{\mu}m-500{\mu}m)$, membrane areas $(12mm2\sim2.52mm2)$ and junction areas $(150{\mu}m2\sim750{\mu}m2)$, respectively. It was thought that measurement results could be used for thermopile infrared sensors optimum structure for micro spectrometers.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.5
• /
• pp.815-821
• /
• 1994

Short-term fading in a mobile radio channel is mainly caused by multipath reflected wave by local scatterers or natural obstacles surrounding a mobile unit. In this paper, we analyze probability density function(PDF), level crossing rate(LCR) and widths and depths of fades for the measured field strength data in Seoul and Daejeon areas. As a result, the satatistical distribution of signal variations within any small area with the constant mean value becomes the Rayleigh distribution The variation of fade depths is small regardless of the environment such as urban, suburban. etc. However, the variation of fade widths is large with the change of circumstantial structures and environment. the maximum level crossing rate is obtained near the mean value.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10a
• /
• pp.148-152
• /
• 2006

가상공간의 시각적 렌더링에 있어서 카메라의 위치와 방향에 따라서 현재 보여지고 있는 장면의 복잡도가 달라지게 된다. 단순한 장면과 복잡한 장면이 혼합되어있는 경우에 렌더링의 프레임율이 크게 달라지게 되어서 사용자의 가상공간의 항해에 대한 카메라 이동 시에 끊김 현상이 느껴지게 된다. 본 논문에서는 장면이 복잡도에 크게 의존되지 않으면서 지속적으로 안정된 프레임율을 보장할 수 있는 기여도 컬링 기법을 제시한다. 컬링 기술은 복잡한 장면의 빠른 렌더링을 위해 필수적으로 사용되어왔다. 자연스럽고 빠른 렌더링을 위해 본 논문에서는 이미지 공간에서 모든 객체에 대한 바운딩 사각형의 넓이를 빠르게 계산한다. 영상 영역에서의 계산된 넓이가 작은 객체들을 프레임율을 만족시키도록 렌더링 파이프라인에서 제외시킨다. 전체적으로 기여도가 높은 객체들은 최대한 포함시키기 때문에 렌더링의 질을 보장한다. 복잡한 환경에서의 기여도가 작은 많은 객체들을 배제시킴으로써 속도를 향상시킨다. 실제 대도시의 일정 영역에 제안한 기법을 적용하여 본 결과, 복잡한 장면들이 질적인 저하 없이 균일하고 빠른 렌더링을 보장한다는 것을 보여주었다.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.4
• /
• pp.335-342
• /
• 2008

Purpose of study: To compare on bone formation between ovariectomized rats and normal rats after graft of alloplastic bone material. Material and methods: Twenty female rats were used in this study. They were divided into two groups by each ten rats. One group was ovariectomized and grafted alloplastic bone material. Other group was non-ovariectomized and grafted alloplastic bone material. After a healing time of 4 weeks, the animals were sacrificed and decalcified preparations were routinely processed for histologic evaluations. Results: Ovariectomy group was significantly lesser bone formation compared with non-ovariectomy group. Conclusions: Ovariectomy acts as a negative factor in new bone formation.

• Journal of Elementary Mathematics Education in Korea
• /
• v.20 no.4
• /
• pp.695-715
• /
• 2016

This study is on the teaching method for the students who belong to the same school (one, the gifted class, passed gifted education of Science High school ), 1-1, face-to-face learning (two, good students in regular classroom) with a teacher, paired learning teams (4 people, gifted classes), and group lessons (20 people, gifted classes) and using the justification analysis framework tool(PIRSO) of Kim(2010) analyzes the justification element of the students in the group classes regular polygons paper was to explore ways to improve the justification of the folding maps activities. As a result, the width of the largest polygon difficulty level appropriate to the class for gifted elementary school classes but the individual learning style of the 1-1 face-to-face with a teacher or discussion with colleagues and cooperative approach is justified, rather than the material of the study of origami activities it turned out to be more effective in improving the level of justification. Unlike the individual learning activities, the exploration for class is the need to strain in parallel to the student is selected as needed, rather than serial manner was confirmed that it is necessary to clearly present problems even from the beginning. Development of teaching through the implications obtained from this method of reconstruction activities and proposed improvement measures for questioning.

• Investigative Magnetic Resonance Imaging
• /
• v.15 no.1
• /
• pp.41-47
• /
• 2011

Purpose : To evaluate the cause of internal jugular vein (IJV) obstruction on contrast enhanced 3D MR angiography (CE-MRA) using contrast enhanced computed tomography (CE-CT). Materials and Methods : A total number of 30 patients were enrolled, who underwent both head and neck CE-MRA and CE-CT from 2005 to 2008. We defined obstruction group which had IJV obstruction and control group which had no IJV obstruction on CE-MRA. The following parameters were measured from axial images of CE-CT: 1) diameter of IJV; 2) distance between the styloid process and ipsilateral lateral mass of the atlas; 3) maximum area of lateral mass of the atlas. Each parameter was compared between obstruction group and control group. Results : The diameter of IJV and distance between the styloid process and lateral mass of the atlas at IJV obstruction side in obstruction group were $1.6{\pm}1.0\;mm$ and $4.1{\pm}2.1\;mm$ respectively, which resulted in statistical significance (p<0.01). The maximum area of lateral mass of the atlas at IJV obstruction side in obstruction group was $103.4{\pm}25.3\;mm^2$ which is significantly larger than in control group (p<0.05). Conclusion : We found that the cause of IJV obstruction on CE-MRA could be narrow space between the styloid process and the lateral mass of the atlas, which was related with asymmetric larger area of lateral mass of atlas.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.48 no.3
• /
• pp.142-146
• /
• 2003

To obtain information on the inheritance of grain weight and grain size of japonica cultivar, Sobibyeo which has high yielding potential and large grain in rice, the genetic variation, heritability and phenotypic correlation of 1,000 grain weight, grain length, width and thickness were investigated in two crosses, Iksan 429/Sobibyeo and Iksan 430/Sobibyeo. The gram characteristics of $\textrm{F}_1$ hybrids exceeded mid-parental values, while grain length: width ratio was intermediate between the parents. In $\textrm{F}_2$ populations, the average grain length, width and thickness were intermediate as mid-parental values, but grain weight exceeded the mid-parental values. In $\textrm{F}_2$ populations of Iksan 429/Sobibyeo and Iksan 430/Sobibyeo, mean 1,000 grain weights were 24.86g and 25.04 g on the average, and ranged 18.4g-32.2g and 19.5g-33.4g, respectively. The segregation mode for grain weight was regarded as a nearly normal distribution in two crosses of $\textrm{F}_2$ populations. Estimates of broad sense heritabilities for grain weight in Iksan 429/Sobibyeo and Iksan 430/Sobibyeo were high as 89.00% and 89.06%, and grain length showed the highest heritability among grain characteristics as 97.45% and 97.35%, respectively. Grain weight was highly correlated with grain length, width and thickness, and grain length was highly correlated with grain width and thickness. These grain characteristics were apparently controlled by polygenes. Accordingly, these traits will be readily improved through selection in the early segregating generations.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.232-232
• /
• 1999

교류형 플라즈마 방전 표시기(AC Plasma Display Panel, AC PDP)에 사용되는 플라즈마는 그 부피가 너무 작아서 플라즈마에 변화를 일으키지 않고 그 물성을 관측하기란 쉬운일이 아니다. 그래서 주로 PDP 내의 물성을 관측하는 데 시뮬레이션에 의존하게 된다. 그 물성중에 PDP내의 전계 분포에 대한 정보는 방전의 형성 및 소멸에 대한 많은 단서를 제공하고 있다. 특히 AC PDP의 경우, 유전체에 형성되는 벽적하(wall charge)가 방전의 형성 및 PDP 구동에 중요한 역할을 하는데, 이는 PDP 내의 전계 분포를 살펴봄으로써 대략 예측할 수 있다. 본 연구에서는 시뮬레이션에 의존하지 않고, 직접 레이저 유도 형광법을 이용하여 AC PDP 내의 전계를 측정하였다. 방전 가스인 헬륨(He)의 에너지 준위는 전계의 크기에 따라 에너지 준위가 변화하여, Rydberg(n$\geq$8) 준위가 여러 개의 준위로 나누어지는 현상이 일어나는데, 이를 Stack 효과라고 한다. 따라서 전계의 세기가 커짐에 따라서 각 준위와 준위 사이 값(splitting)이 커지는데, 이를 이용하면 전계를 측정할 수 있다. 즉, 헬륨 원자를 여기시키는 레이저 파장을 변화시키면서 관측되는 레이저 유도 형광 신호를 관측하면, 준위의 splitting을 관측할 수 있다. 본 연구에서는 PDP 내의 전계의 시간적 변화를 관측하였다. 50%, 40kHz의 구형파를 PDP의 두 전극에 가하였을 때, 플라즈마가 켜진 상태뿐만 아니라 플라즈마가 꺼진 후에도 전계에 의한 Splitting 신호가 관측이 되었는데, 전계로 환산하였을 때, 그 값은 대략 수 kV/cm의 값을 갖았는데, 이는 wall charge에 의한 값으로 사료된다.결과로 생각되어진다.플라즈마의 강도값을 입력하여 플라즈마의 radiation을 검출하고, 스퍼터링 공정중 실질적인 in-situ 정보로 이용하였다. PEM을 통하여 In/Sn의 플라즈마 강도변화를 조사하였다. 초기 In/Sn의 플라즈마 강도(intensity)는 강도를 100하여, 산소를 주입한 결과, plasma intensity가 35 줄어들었고, 이때 우수한 ITO 박막을 얻을 수 있었다. Pulsed DC power를 사용하여 아크 현상을 방지하였다. PET 상에 coating 된 ITO 박막의 표면저항과 광투과도는 4-point prove와 spectrophotometer를 이용하여 분석하였고, AES로 박막의 두께에 따른 성분비를 확인하였다. ITO 박막의 광투과도는 산소의 유량과 sputter 된 In/Sn ion의 plasma emission peak에 따라 72%-92%까지 변화하였으며, 저항은 37$\Omega$/$\square$ 이상을 나타내었다. 박막의 Sn/In atomic ratio는 0.12, O/In의 비율은 In2O3의 화학양론적 비율인 1.5보다 작은 1.3을 나타내었다.로 보인다.하면 수평축과 수직축의 분산 장벽의 비에 따라 cluster의 두께비가 달라지는 성장을 볼 수 있었고, 한 축 방향으로의 팔 넓이는 fcc(100) 표면의 경우 동일한 Ed+Ep값에 대응하는 팔 넓이와 거의 동일한 결과가 나타나는 것을 볼 수 있다. 따라서 이러한 비대칭적인 모양을 가지는 성장의 경우도 cluster 밀도, cluster 모양, cluster의 양 축 방향 길이 비, 양 축 방향의 평균 팔 넓이로부터 각 축 방향의 분산 장벽을 얻어낼 수 있을 것으로 보인다. 기대할 수 있는 여러

• Journal of the Korean School Mathematics Society
• /
• v.21 no.1
• /
• pp.19-37
• /
• 2018

In this study, the actual state of teaching seven extensive quantities (time, length, capacity, weight, area, angle measure, volume) of measurement domain are analyzed comparatively between the 2015 revised elementary school mathematics curriculum in Korea and the 2017 revised elementary school mathematics curriculum in Japan in terms of comparison in measurement, direct measurement, indirect measurement, and estimation in measurement. From the results of this comparative analysis, some implications for discussion on the development of the next elementary school mathematics textbook and the next elementary mathematics curriculum can be suggested. First, it is necessary to discuss on clarifying the range of handling of comparison, direct measurement, indirect measurement, estimation of seven extensive quantities respectively. Second, it is necessary to discuss on doing direct comparison when intuitive comparison is difficult. Third, it is necessary to discuss on reconsidering indirect comparison of weights. Fourth, it is necessary to discuss on reconsidering measurement using arbitrary units in case of angular measures. Fifth, it is necessary to discuss on dealing with estimating the area of $1cm^2$ and $1m^2$ and the volume of $1cm^3$ and $1m^3$ for the purpose to make rough guesses their size respectively.

• Science of Emotion and Sensibility
• /
• v.21 no.1
• /
• pp.115-128
• /
• 2018

Understanding the process of spatial perception plays a significant role in the design process as well as in the use of actual spaces. The perception of spatial depth can vary according to the space composition and design even there is no change in the actual size of the space. The properties of 3-dimensional space are its width, height, and depth; however, compared to the perception of spatial width and height, little research and theories exist on spatial depth perception. The reasons may be there less interest lies in the effect of spatial depth perception than that of spaciousness or height of space. This study is an investigation of the process of spatial depth perception using an eye-tracking device with stimuli developed through Computer Graphics. A total of 44 interior design major students participated in the eye tracking experiment; and they looked at three images comprised of an identical room with only changes in the rear wall condition. The results show that a significant difference in the fixation duration per stimulus exists. In addition, a significant difference exists on the fixation duration per stimulus according to the participants' answer of the deepest space. The result of this study can help identify factors for spatial depth perception, validate the assumption on it, and provide knowledge on how to acquire desirable spatial depth by utilizing the research result.