• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.9
• /
• pp.74-81
• /
• 2002

Recently tube hydroforming has been widely applied to the automotive industries due to its several advantages over conventional methods. In this paper, attention is paid to comparison of an implicit and an explicit finite element method widely used for numerical simulation of a hydroforming process. For an explicit FEM, a huge amount of computational time is required because of the very small time increment to solve a quasi-static problem. Hence, when an explicit FEM is used fDr a hydroforming process, it is general to convert the real problem to a virtual problem with a different processing time and mass density by appropriate scaling factor. However it is difficult to figure out how large the scaling should be adopted enough to ignore the dynamic effects and maintain the desired accuracy. In this paper, the comparison of the results obtained from both methods focus on the accuracy of the predicted geometrical shape and the stress with various scaling factors which are applied to analyze hydroforming process of an automobile lower arm.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.12
• /
• pp.86-98
• /
• 1996

An combined implicit/explicit scheme for the analysis of sheet forming problems has been proposed in this work. In finite element simulation of sheet metal forming processes, the robustness and stability of computation are important requirements since the computation time and convergency become major points of consideration besides the solution accuracy due to the complexity of geometry and boundary conditions. The implicit scheme dmploys a more reliable and rigorous scheme in considering the equilibrium at each step of deformation, while in the explict scheme the problem of convergency is elimented at thecost of solution accuracy. The explicit approach and the implicit approach have merits and demerits, respectively. In order to combine the merits of these two methods a step-wise combined implici/explicit scheme has been developed. In the present work, the rigid-plastic finite element method using bending energy augmented membraneelements(BEAM)(1) is employed for computation. Computations are carried out for some typical sheet forming examples by implicit, combined implicit/explicit schemes including deep drawing of an oil pan, front fender and fuel tank. From the comparison between the methods the advantages and disadvantages of the methods are discussed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.12
• /
• pp.1489-1495
• /
• 2013

High-pressure flows are ubiquitous in many industrial fields. A representative application is fuel injection using a common-rail control system in diesel engines, where the injection pressure in the injector exceeds 1000 bar. In high-speed injection, the fluid injected through the nozzle undergoes breakup owing to the interaction with the ambient gas. The breakup process influences mixture formation, which in turn influences combustion in diesel engines. Therefore, it is very important to analyze the breakup process of fuel spray. The Reitz and Diwakar model and cascade atomization and breakup (CAB) model were used in this study as sub-models for the numerical analysis of the breakup process of fuel spray. This study aims to precisely analyze the breakup process of spray and to investigate the breakup frequency of the injected fuel. Consequently, it proposes a suitable sub-model for analyzing the breakup process of a diesel spray by using CFX, a commercial CFD program.

• The Korean Journal of Ecology
• /
• v.25 no.3 s.107
• /
• pp.153-161
• /
• 2002

This study was carried out to classify forest vegetation of the Mt. Naeyeon with phytosociological analysis of ZM school and to explain ordination of communities with CCA. The research sites were located between the northern part of Pohang-si area and the southern part of Yeongdeok-gun area. The 70 plots consisted of 253 species were investigated. The forest vegetation was classified into Quercus mongolica community, Q. variabilis community, Pinus densiflora community, Carpinus laxiflora community and Zelkova serrata community. Q. mongolica community was divided into 2 groups such as Rhododendron schlippenbachii group and Euonymus oxyphyllus group and Q. variabilis community was divided into 3 groups such as Syneilesis palmata group, Lespedeza$\times$tomentilia group and Tilia mandshurica group, and Z. serrata community was divided into 2 groups such as Carpinus cordata group and Diospyros lotus group. According to the results of CCA ordination, Q. mongolica community showed high positive correlation to altitude and topography, whereas it showed negative correlation to bare rock. But Z. serrata community showed the opposite tendency to Q. mongolica community, Altitude was considered as the most important factor among 5 environmental variables in the correlation with axes.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.10a
• /
• pp.39-43
• /
• 1995

대형 상용차용 내연기관에서 방출되는 소음의 음압 레벨은 경우에 따라 140dBA 이상으로 환경소음 배출규제에 부합되는 배출 소음을 위하여는 소음기의 적절한 설계가 필요하다 하겠다. 소음기는 방출 소음을 저감시키는 기본적인 작용 이외에 엔진의 효율을 저하시키는 배압(back-pressure) 상승의 효과를 동반할 뿐만 아니라 차체에의 장착을 위하여 크기와 무게의 제약을 받는다. 따라서 소음기는 설계자의 경험과 과거에 사용되어 온 소음기에 대한 이해, 소음기를 구성하는 단위 요소에 대한 음향학적 해석이론, 제작 과정에서의 경험과 튜닝 등에 바탕을 두고 설계되어져 왔다. 본 연구에서는 대형 상용차에 장착되는 기존 소음기 구성요소의 투과 손실(Transmission Loss: TL)을 전달 행렬법으로 해석하여 음향학적 특성을 규명하고 개별 소음기 요소에 대한 기존의 연구 결과를 바탕으로 공명기와 다공 요소를 이용하여 기존 소음기를 재설계함으로써 배출 소음의 저감을 이루어 나간 과정을 소개하고 이를 적용 사례를 중심으로 살펴보고 있다. 소음기의 설계를 위하여 고려할 수 있는 음향학적 요소는 그 기능과 형태면에서 다양하나 본 연구에서는 대형 상용차용 소음기에 주로 사용 가능한 공명기와 다공관을 주된 설계요소로 생각하였다. 공명기는 공명 주파수 대역의 소음을 저감하는 역할을 하므로 일정한 엔진 회전수 하에서 엔진의 방출 소음중 폭발 성분에 의한 소음을 줄이는데 효과적으로 사용될 수 있지만 가속 주행시에는 회전수(rpm)의 변화에 따라 폭발 주기가 변화하게 되므로 공명기의 설계에 주의를 기울여야 한다. 내연 기관용 소음기에 빈번하게 쓰이는 다공 요소의 해석 방법으로는 Sullivan[1], Kim and Yoon[2] 등의 분할 접근 방법(Segmentation approach)과 Jayaraman and Yam[3], Munjal[4], Peat[5] 등의 연성 제거 방법(Decoupling Approach)등이 제시되었고 평면파 영역에 한하여 해서되어져 왔다. 본 논문에서는 분할 접근 방법(Segmentation Approach)을 이용하여 다공 요소로 이루어진 소음기를 해석하는데 적용하였다.

• Journal of the korean Society of Automotive Engineers
• /
• v.17 no.5
• /
• pp.1-8
• /
• 1995

전산유체 해법의 내연기관 3차원 해석에 대한 최근 연구 동향에 대해 소개하였다. 난류유동 해석은 아직 정확성과 신뢰도 면에서 많은 연구가 필요하지만 현재의 상태에서도 직관, 경험, 실험 측정에 의해 파악하기 어렵거나 많은 비용과 시간이 요구되는 부분을 보완해 줄 수 있는 도구로서 인정받고 있다. 연소해석 부분은 현상 자체가 유동, 연소, 분무, 열전달등이 복합적으로 작용하는 어려운 문제로서 공학계산의 가장 첨단 분야 중의 하나라 할 수 있다. 현재 관련 모델로서 스파크 점화기관의 점화 및 화염전파, 배기가스 생성 과정과 디젤기관의 압축착화, 예혼합 및 확산 연소, 매연 등의 생성과정에 대한 모델 개발과 검증이 활발히 이루어지고 있다. 일부 발표된 논문 결과들은 이와 같은 방법이 엔진의 주요 연소 특성을 재현하는데에 성공적으로 활용될 수 있음을 보여주고 있다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.22 no.1
• /
• pp.121-131
• /
• 1998

This paper applies the FE analysis procedure, developed in the Part I of the companion article, to the three-dimensional rubber pad deformation during rubber-pad forming process. Effects of different algorithms corresponding to incompressibility constraint and time integration methods on numerical solution responses are investigated. Laboratory scale experiments support the validity of the developed FE procedure an demonstrate the accuracy of the numerical models. Full scale model responses are also predicted using the reasonable method and parameters obtained in laboratory modeling.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.22 no.1
• /
• pp.111-120
• /
• 1998

This paper is the first one of two-parted research efforts focusing on the modeling of rubber pad forming process. The rubber pad, driven by the pressurized fluid during the forming process, pushes the sheet metal to solid tool half and forms a part to final shape. In this part of the paper, a numerical procedure for the FE analysis of the rubber pad deformation is presented. The developed three-dimensional FE model is based on the total Lagrangian description of rubber maerial characterized by nearly incompressible hyper-elastic behavior under a large deformation assumption. Validity of the model as well as effects of different algorithms corresponding to incompresibility constraints and time integration methods on numerical solution responses are also demonstrated.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.2
• /
• pp.89-95
• /
• 2003

We consider a problem of application of analytical redundancy to engine synchronization process of spark ignition engines, which is critical to timing for every ECU process including ignition and injection. The engine synchronization process we consider here is performed using the pulse signal obtained by the revolution of crankshaft trigger wheel (CTW) coupled to crank shaft. We propose a discrete-time linear model for the signal, for which we construct FDI (Fault Detection & Isolation) system consisting residual generator and threshold based on linear observer.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.7
• /
• pp.56-66
• /
• 1999

Thermoacoustic oscillation is a significant problem in cylindrical-type combustors such as common internal combustion engines, industrial furnaces, gas turbine, etc. This kind of low frequency oscillation can lead to serious consequences such as destruction of the combustor and production of strong noise. The accurate numerical simulation of thermoacoustic phenomena is a complex and challenging problem, especially when considering the chemical reaction of mixtures. As with other simulations of aerodynamics and aeroacoustics, the direct computation of thermoacoustic phenomena requires that Navier-Stokes equations be solved using accurate numerical differentiation and time-marching schemes, with non-reflecting boundary conditions. The numerical approach used here aims at qualitative analysis and efficient prediction of those problems, not at the development of an accurate scheme. The numerical prediction developed in this work is shown to be reasonably matched with experimental result.