Browse > Article
http://dx.doi.org/10.3795/KSME-A.2013.37.12.1489

Numerical Study of Breakup Process of Diesel Spray  

Yeom, Jeong Kuk (Dept. of Mechanical Engineering, Dong-A Univ.)
Jung, Woo Sung (Dept. of Mechanical Engineering, Dong-A Univ.)
Publication Information
Transactions of the Korean Society of Mechanical Engineers A / v.37, no.12, 2013 , pp. 1489-1495 More about this Journal
Abstract
High-pressure flows are ubiquitous in many industrial fields. A representative application is fuel injection using a common-rail control system in diesel engines, where the injection pressure in the injector exceeds 1000 bar. In high-speed injection, the fluid injected through the nozzle undergoes breakup owing to the interaction with the ambient gas. The breakup process influences mixture formation, which in turn influences combustion in diesel engines. Therefore, it is very important to analyze the breakup process of fuel spray. The Reitz and Diwakar model and cascade atomization and breakup (CAB) model were used in this study as sub-models for the numerical analysis of the breakup process of fuel spray. This study aims to precisely analyze the breakup process of spray and to investigate the breakup frequency of the injected fuel. Consequently, it proposes a suitable sub-model for analyzing the breakup process of a diesel spray by using CFX, a commercial CFD program.
Keywords
Breakup Model; Common-Rail System; CFD; Internal Combustion Engine; Spray;
Citations & Related Records
Times Cited By KSCI : 6  (Citation Analysis)
연도 인용수 순위
1 Lee, S. D. and Jung, S. H., 2013, "Comparison of Combustion Characteristics Between Esterified and Non-esterified Bio-diesel Oil on CRDI Diesel Engine with Turbocharger," Journal of the Korean Society of Marine Engineering, Vol. 37, No. 1, pp. 53-58.   과학기술학회마을   DOI   ScienceOn
2 Lee, S. H., Kim, H. S., Park, J. H. and Cho, P. B., 2012, "On-Road Investigation of PM Emissions According to Vehicle Fuels(Diesel, DME and Bio-Diesel)," Transactions of KSAE, Vol. 20, No. 3, pp. 88-97.   과학기술학회마을   DOI   ScienceOn
3 Jeong, K. S., Lee, D. G., Roh, H. G. and Lee, C. S., 2011, "Effect of Pilot Injection on Combustion and Exhaust Emissions Characteristics in a Biodiesel Fueled Diesel Engine," Journal of the Korean Society of Combustion, Vol. 16, No. 4, pp. 1-7.   과학기술학회마을
4 Park, W. A., Lee, H. W. and Min, K. D., 2013, "Evaluation of Droplet Breakup Models and Application to the Diesel Engine Combustion Analysis," Transactions of KSAE, Vol. 21, No. 1, pp. 86-91.   과학기술학회마을   DOI   ScienceOn
5 Desantes, J. M., Payri, R., Salvador, F. J. and Gil, A., 2006, "Development and Validation of a Theoretical Model for Diesel Spray Penetration," Fuel, Vol. 85, Issues 7-8, pp. 910-917.   DOI   ScienceOn
6 Park, S. H., Kim, H. J., Kim, S. H. and Lee, C. S., 2010, "Spray-Atomization Characteristics of Biodiesel Fuel with Multiple Injection," Transactions of KSAE, Vol. 18, No. 4, pp. 40-47.   과학기술학회마을
7 Yeom, J. K., 2011, "Basic Experimental Study on the Application of Biofuel to a Diesel Engine," Trans. Korean Soc. Mech. Eng. B, Vol. 35, No. 11, pp. 1163-1168.   과학기술학회마을   DOI   ScienceOn
8 Lee, S. R., 1994, "Internal Combustion Engine, BOSUNGKAK, Seoul, pp. 231-233.
9 Park, S. H., Youn, I. M., Lim, Y. S. and Lee, C. S., 2013, "Influence of the Mixture of Gasoline and Diesel Fuels on Droplet Atomization, Combustion and Exhaust Emission Characteristics in a Compression Ignition Engine," ELSEVIER, Vol. 106, pp. 392-401.   DOI   ScienceOn
10 Liu, A. B. and Reitz, R. D., 1993, "Mechanisms of Air-assisted Liquid Atomization," Atomization and Sprays, Vol. 3, pp. 1-27.   DOI
11 Hossainpour, S. and Binesh, A. R., 2009, "Investigation of Fuel Spray Atomization in DI Heavy-Duty Diesel Engine and Comparison of Various Spray Breakup Models," FUEL, Vol. 88, pp. 799-805.   DOI   ScienceOn