• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.7
• /
• pp.61-70
• /
• 2017

In this paper, an Ethernet equalizer that compensates for automotive temperature variations within a broad range is presented. Communications in automotive systems have become increasingly important because of the many electronics in vehicles. Ethernet protocols are a good candidate for automotive communications. However, they should satisfy the AEC-Q100 requirements that stipulate an operational temperature range from -40 to $150^{\circ}C$. This paper proposes an Ethernet equalizer that can recover data up until 100 m length of CAT-5 cable adaptively within a temperature range of -40 to $150^{\circ}C$. To support the wide temperature range, a feedback system is used. The proposed equalizer has a bandwidth of 31.25 MHz with a fully-differential structure and is implemented in a Hynix $0.13{\mu}m$ BCDMOS technology.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.3 no.4
• /
• pp.304-312
• /
• 2008

In this study, the performance analysis was divided into the public sector and private business sector. The four perspectives of the BSC performance analysis for the private business sector can be applied to all of the enterprises as there are Logical Linkages between the four Perspectives. However, these can not be applied in the same way to the public sector. There is no Logical Linkage between public sector and private sectors. Therefore, since there is no Logical Linkage, the KIX project of the public sector has a constrained condition. With the internal and external perspective views, the BSC of the KIX identifies the quality(operation) factor, user(customer) satisfaction factor, and economic costs effects(finance) factor. Based on the linkage model in both the internal and external perspective views and the BSC performance analysis of these views, a performance analysis model was developed and then performance results were analyzed of the whole KIX project.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.8
• /
• pp.181-191
• /
• 2004

For a rigid retaining wall with rough face, the magnitude and distribution of active earth pressure on the wall are affected by the shape of failure surface and arching effect developed in the backfill as well as internal friction angle of the backfill and wall friction angle. Therefore, the practical shape of failure surface and arching effect in the backfill must be considered to acquire accurate magnitude and non-linear distribution of active earth pressure acting on the rigid retaining wall. In this study, a new formulation for calculating the active earth pressure on a rough rigid retaining wall rotating about the top is proposed considering the practical shape of non-linear failure surface and arching effects. Accuracy of the proposed equation is checked through comparisons of calculations from the proposed equations with existing model test results. The comparisons show that the proposed equations produce satisfactory results.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.10
• /
• pp.820-826
• /
• 2013

In this paper, a compact and wideband CLAS(Conformal Load bearing Antenna Structure) was studied using smart skin technique. In order to satisfy the electrical performance of the CLAS antenna, the proposed CLAS antenna is composed of conductive mesh, face-sheet, radiator, honeycomb, housing. Especially, radiator is composed of composite magneto-dielectric material and radiating element etched on the PCB (Printed Circuit Board). The radiating element is inserted into the composite magneto-dielectric material and has sloted Folded LP(Log Periodic) structure. By fabricated composite magneto-dielectric, the resonance frequency is decreased and the impedance matching characteristics is improved. We verified that the antenna has wideband characteristics and compact size using the antenna test results.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.1
• /
• pp.348-354
• /
• 2012

This paper presents a framework for quantitative software development performance measurement and analysis based on characteristics of software in System on Chip (SoC) industry, one of the semiconductor businesses. In this paper, we propose a measurement model based on not only theoretical model (Performance Pyramid) but also characteristics of SoC embedded software. Quantitative software development performance measurement is not just collecting indicators but analyzing quality, cost, and delivery (QCD) of collected indicators. Externally, it is possible for programmers to develop software meeting customers' needs. Internally, more efficient software development can be possible through the visible productivity increase. Using the proposed framework, the paper quantitatively measures embedded software development performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.6B
• /
• pp.443-452
• /
• 2012

In Mobile Ad-hoc Networks, previous routing protocols classified into proactive and reactive approach respectively have pros and cons under the use of applications and environment. Moreover, to integrate their advantages in case by case, hybrid approach is consistently researched, and Zone Routing Protocol (ZRP) was motivating many recent hybrid protocols. ZRP uses proactive routing to the node located within the zone defined by the specific number of hops, while it uses reactive routing to other nodes. However, in ZRP, because proactive routing is applied only within the zone defined by the number of hops, the zone is formed regardless of whether real data communication occurred frequently or not. In this paper, we propose a new hybrid routing scheme which employs the zone method but forms customized zone considering traffic load and number of hops, by a new decision method named Dynamic Zone Decision (DZD). Additionally, we analyze the performance of the proposed scheme, comparing with the previous proactive, reactive, and hybrid routings.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.8A
• /
• pp.712-722
• /
• 2011

Wireless body area network(WBAN) provide communication service in the vicinity of the body. Since WBANs utilize both MICS frequency band for implant medical applications and ISM frequency band for medical and consumer electronics(CE) applications. Therefore, MAC protocols in WBAN should be designed considering flexibility between medical and CE applications. In this paper, we identify the requirements of WBAN MAC protocols and propose a WBAN MAC protocol which satisfies the requirements. In other to provide transmission flexibility for various applications. we present the dynamic CFP allocation and opportunity period. Extensive simulation result show that the proposed protocol achieves improved throughput and latency in WEAN environment cimpared with IEEE 802.15.4.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.19 no.4
• /
• pp.545-549
• /
• 2009

Microarray data sets could contain thousands of gene expression levels and have been considered as an important source from which meaningful patterns could be extracted for further analysis in biological studies. It is sometimes necessary to retrieve out specific genes or samples of analyst's interest in an effective way. This paper is concerned with a method to make use of fuzzy signature set in order to filter out genes or samples which satisfy complicated constraints as well as simple ones. Fuzzy signatures are an extension of vector valued fuzzy sets, in which elements of the vector are allowed to have a vector. Fuzzy signature sets are similar to fuzzy signatures except that their leaf elements are fuzzy sets defined on the interval [0,1]. This paper introduces an extension of fuzzy signature sets which specifies aggregation operators at each internal node and comparison operators for aggregation. It also shows how to use the extended fuzzy signature sets in microarray data retrieval and some examples of its usage.

• Information Systems Review
• /
• v.4 no.2
• /
• pp.223-236
• /
• 2002

In an agent-based system, each agent has its own decision making capability and competes, cooperates, and communicates each other with an agent interface. Virtual manufacturing has characteristics as a typical application area of agent-based system: complex and time-bound decision making and negotiation. The time-boundness influences the choice of decision making models and design of protocols for internal and external negotiation. In this paper, we provide a case study which suggests a time-bound framework for external and internal negotiation between the agents for virtual manufacturing environment. We illustrate decision making model selection strategy and the system architecture of the agent-based system for the complex and time-bound environment.

• Journal of Korea Soil Environment Society
• /
• v.4 no.2
• /
• pp.163-174
• /
• 1999

This paper presents a case history of remedial action adopted for contaminated groundwater in a landfill. The objectives of the projects are : (1) to effectively confine contaminated groundwater with an economically reasonable means, (2) to prevent further contamination of soil by collecting and treat the contaminant. and (3) to assure the environmental safety of the landfill during its operating period. Reported are the process from site investigation, through design and construction of an appropriate remedial action, to the monitoring of the selected confinement system. In view of the results of site investigation, deep soil mixing cutoff wall using the DMW(deep soil mixing cutoff wall) method and specially produced HEC soil stabilizer were used for the construction of deep soil mixing cutoff wall. For rock foundation with sever fractures, chemical grout curtain with urethane was installed. The monitoring results to date indicate that the selected vertical barrier performed satisfactorily.