• Journal of the Korea Convergence Society
• /
• v.10 no.6
• /
• pp.165-170
• /
• 2019

This study carried out the structural analysis and vibration analysis on scooter seat. By comparing with three kinds of B-bone A, Julio B, and City Ace C, the load was applied to scooter seat as much as a weight of person. Through structural analysis, this study examined which seat is most deformed by comparing the deformation each other or affords passengers most convenience and does not afford passengers the inconvenience by absorbing the vibration during driving. Model C has the most total deformation at the structural analysis result and Model B is seen to be changed to be convenient to sit the deformation as it deforms largely. Through this study, which seat is most convenient and becomes strong on durability can be confirmed. As the durability analysis result data of scooter seat model obtained on the basis of this study result are utilized, the esthetic sense can be shown by being grafted onto the machine or structure at real life.

• Journal of the Korea Convergence Society
• /
• v.5 no.4
• /
• pp.39-47
• /
• 2014

This study compares and analyzes the results of structural analyses due to three constraint conditions on the emblem for car. The analysis results are studied by investigating the influence due to the column angle combined between the lower plate of amblem and the upper amblem. The combined with the amblem is parallel to the longitudinal axle of the amblem at the first case. The angle combined with the amblem is perpendicular to the lower plate at the second case. The angle combined with the amblem is perpendicular to the amblem at the third case as the last case. The amblem model for car can be thought to be optimized by investigating the fatigue life and the durability of amblem through the simulation of structural and fatigue analyses. And it is possible to be grafted onto the convergence technique at design and show the esthetic sense.

• Prospectives of Industrial Chemistry
• /
• v.22 no.4
• /
• pp.1-12
• /
• 2019

최근 전 세계적으로 이상화탄소 배출규제에 대응하기 위해 신에너지를 동력원으로 하는 자동차에 관심이 증가하고 있다. 그중 이온 교환막 연료전지(PEMFC)는 내연기관을 대신에 자동차 동력원으로 많이 사용되어지고 있으며 양산화를 위한 노력을 전 세계적으로 하고 있다. 하지만 이러한 수소 자동차가 시장과 소비자의 요구 조건을 충족하기 위해서는 내구성을 개선하여야 한다. 현재 선진사들을 중심으로 수소 자동차의 내구성을 개선하기 위해 노력하지만, 대부분 실험적 방법으로 내구성의 분석 및 평가를 수행하고 있다. 하지만, 이러한 방법은 비용과 시간이 많이 들기 때문에 경제적이지 못하다. 본 기고문에서는 내구성에 영향을 받는 인자, 연료전지 시스템 내구성을 예측하고 평가할 수 있는 수소 자동차 내구성 모델 개발에 필요한 수식에 관한 연구, 그리고 내구성 개선을 위한 해석적 방법(simulation)에 관한 연구 동향을 소개하고자 한다.

• Journal of the Korea Convergence Society
• /
• v.6 no.1
• /
• pp.93-101
• /
• 2015

As the axle at the vehicle of railway has the important role for safe running, the strength, and impact-proof, safety factor, stress and deformation must be considered. There are the simulation models of 1 and 2 in this study. These models are investigated by performing the convergence technique through the design, the structural and fatigue analyses with CATIA and ANSYS. As the maximum deformation and equivalent stress of model A are lower than those of model B, model A has more durability than model B. The durability to prevent the damage can be investigated by applying the result of this study into the part design of the vehicle of rail road. And it is possible to be grafted onto the convergence technique at design and show the esthetic sense.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.1
• /
• pp.10-18
• /
• 2016

RC(Reinfored Concrete) structures exposed to carbonation in urban city have durability degradation with extended service life and cracks in concrete causes a local accelerated carbonation. In the present work, crack effect on carbonation depth is investigated and the service life of RC structure is evaluated considering cracks from early age and time-dependent cracks based on the previous field investigation. DFP(Durability Failure Probability), safety index, and the related service life are calculated considering the time to crack width reaches to maximum crack width(0.3mm). The results with time effect on crack width show lower DFP and longer service life, which seems to be reasonable compared with conservative results from crack effect from initial stage. Furthermore, crack effect is evaluated to be insignificant on DFP and service life. The technique with time-dependent crack effect on carbonation can be effectively used for RC structure containing cracking in use.

• Journal of the Korea Convergence Society
• /
• v.11 no.4
• /
• pp.189-193
• /
• 2020

In this study, the structural analysis of the track was performed according to the gap between the rails due to thermal expansion by the frictional contact between the wheels of the train in motion. The equivalent stress and total deformation at the condition for which the gap between joints are wide as the winter condition (model B) can be seen to happen more than at the summer condition (model A) in which the joints are narrow. If the results of this study are applied to the design of railway tracks, it is thought to be highly useful in preventing fatigue failure and increasing its durability. By applying the durability analysis at the seam of railroad track by season, this investigation result is seen to be favorable as the convergent research applied to the aesthetic design.

• Journal of the Korea Convergence Society
• /
• v.10 no.11
• /
• pp.297-302
• /
• 2019

A-pillar is closely related to safety for the purpose of protecting the bodies of passengers by mitigating the impact that may be caused by the vehicle being overturned while driving. Therefore, the A-pillar should protect these parts from a variety of dynamic loads. This study result is thought to contribute for the strength and durability of A-pillar by designing two types of parts before making this product and analyzing the product which thickness is adjusted for the light weight of vehicle. If this study result is practically applied to the parts of A-pillar in a car, it is considered that the damage can be protected by the durability verification of design. By utilizing the data of analysis and design on the strength and durability of automotive A-pillar in this study, the esthetic sense can be given by being grafted onto the real automotive part.

• Proceedings of the KAIS Fall Conference
• /
• 2009.12a
• /
• pp.885-888
• /
• 2009

자동차용 Alloy Wheel은 차량의 수직하중이나 가로 방향 하중, 구동, 제동토크 등 주행 시에 발생하는 여러 형태의 응력을 받으면서 사용되므로 이러한 응력을 견딜 수 있는 강성은 물론 차량 부품으로서의 요구 수명도 만족하여야 한다. 알루미늄 휠은 개발 후 규격에 준하는 내구성 평가를 위하여 반경 방향 부하 내구시험과 굽힘모멘트 내구시험과 주행 중 요철이나 벽돌 등에 의한 노면으로부터 갑작스런 하중에 대한 내충격성 평가를 위한 충격시험이 실행되고 있다. 이러한 시험은 많은 시간이 소요되고 있으며, 또한 시험 중 불합격 판정이 날 경우 또다시 처음의 공정을 모두 거쳐 다시 시험을 하게 된다. 3 Piece와 같은 알루미늄 휠은 여러 공정에 의한 생산되어지기 때문에 많은 시간적, 물질적 손실이 일어나고 있다. 따라서 자동차용 알루미늄 휠의 요구조건을 충분히 만족시키며 소비자의 요구에 맞는 품질과 시간을 충족시켜 기업경쟁력 확보는 물론 원가절감에 의한 기업 경쟁력 향상을 위하여 설계 단계서부터 시험조건을 고려한 내구성 해석에 의한 알루미늄 휠의 시험횟수를 단축하고자 한다. 본 논문에서는 3 Piece 알루미늄 휠의 축(shaft)하중에 의한 내구성 평가에 대하여 CAE시스템을 이용하여 보다 빠르고 정확한 결과를 산출함으로서 설계시간의 단축은 물론 다양한 형상의 제품들을 설계단계에서부터 생산에 이르기까지의 해석활용법을 수립하고자 하였다.

• Journal of the Korea Convergence Society
• /
• v.11 no.6
• /
• pp.191-196
• /
• 2020

In this study, the durability was analyzed as the models with three shapes depending on the length of the landing gear. Overall, the upper part of the landing gear produced a greater amount of deformation, but the equivalent stress was shown to be high in the upper part just above the lower part. Model 3 shows that the maximum equivalent stress is more than 4 times and the maximum total deformation is more than 24 times compared to model 2. Model 3 showed that the damage could occur beyond the yield stress at the lower end. Model 2 with the upper part longer than the lower part showed the lowest equivalent stress and total deformation among the three models. Therefore, from a structural standpoint, it was shown that model 2 was the most durable at landing and model 3 was the most degraded in terms of durability. The design and analysis results of this study can be effectively applied at grasping the structural durability of landing gear. By applying the structural durability analysis of landing gear, this paper is seen as the convergence study that conforms to aesthetic design.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.5
• /
• pp.66-72
• /
• 2019

To improve ride quality and running stability of high speed train(HST), it is important that connection between coaches adopts the articulated bogies by using a gangway ring, unlike the conventional independent bogies assembled with car bodies. Although the gangway ring should be ensured absolute safety against passenger movement between coaches during train operation, there is still a lack of quantitative durability criteria of that. Therefore, in order to improve the passenger safety of HST, it is important to study the test requirements on durability evaluation for the ring. In this study, seven mixed loading cases were derived from the triaxial loading(vertical/lateral/longitudinal) modes. The safety factor of each component is at least 2.4 or more from the results of the finite element analysis. In addition, fatigue safety was evaluated through durability analysis from the viewpoint of strain-life design. Durability tests for the gangway ring carried out a total of 10 million cycles in 4 phases load conditions. After the durability test, the defect of each component was investigated using nondestructive testing techniques.