Browse > Article
http://dx.doi.org/10.15207/JKCS.2014.5.4.039

A Durability Study through the Fatigue Analysis on the Emblem for Car  

Cho, Jae-Ung (Division of Mechanical & Automotive Engineering, Kongju University)
Publication Information
Journal of the Korea Convergence Society / v.5, no.4, 2014 , pp. 39-47 More about this Journal
Abstract
This study compares and analyzes the results of structural analyses due to three constraint conditions on the emblem for car. The analysis results are studied by investigating the influence due to the column angle combined between the lower plate of amblem and the upper amblem. The combined with the amblem is parallel to the longitudinal axle of the amblem at the first case. The angle combined with the amblem is perpendicular to the lower plate at the second case. The angle combined with the amblem is perpendicular to the amblem at the third case as the last case. The amblem model for car can be thought to be optimized by investigating the fatigue life and the durability of amblem through the simulation of structural and fatigue analyses. And it is possible to be grafted onto the convergence technique at design and show the esthetic sense.
Keywords
Emblem for car; Fatigue analysis; Fatigue life; Durability; Convergence technique;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 H. K. Choi, J. U. Cho, "Structural Analysis on the Fracture of Bonded Double Cantilever Beam Model", Jou. of Korean Soc. of Mechanical Technology, Vol. 14. No. 4, 2012.
2 J. M. Kim, K. T. Lee, H. Y. Kim, "Numerical Modeling to Evaluate Reat Crashworthiness for Round Recliner of Automotive Seats", Transactions of KSAE, Vol. 17, No. 1, pp. 64-71, 2009.   DOI
3 T, K, Lee, B, S, Kim, "The structure of an Automotive Woofer Speaker", Jou. of Korean Soc. of Mechanical Technology, Vol. 14, No. 2, pp. 19-24, 2012.
4 Y. S. Lee, B. H. Jun, J. M. Oh, "A Study on the Design Optimization of Composite Cylindrical Shells with Vibration, Buckling Strength and Impact Strength Characteristics", Transaction of KSAE, Vol. 5, No. 4, pp. 48-69, 1997.   과학기술학회마을
5 J. S. Lee, "Design Parameters for Supporting Frame in a Twist screen", Jou. of Korean Soc. of Mechanical Technology, Vol. 15, No. 2, pp. 85-91, 2013.
6 H. Y. Kim, S. K. Lee, Y. J. Shin, "Analyses of Deployment Process and Sled Test for Designing Airbag Module", Transactions of KSAE, pp. 118-128, 1998   과학기술학회마을