• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.3
• /
• pp.185-195
• /
• 2021

The flapping-wing micro air vehicle (FW-MAV) in this study utilizes the cambered wings made of quite flexible material. Similar to the flying creatures, the present cambered wing uses three different materials at its leading edge, vein, and membrane. And it is constrained in various conditions. Since passive rotation uses the flexible nature of the wing, it is important to select an appropriate material for a wing. A three-dimensional fluid-structure interaction solver is developed for a realistic modeling of the cambered wing. Then a parametric study is conducted to evaluate the aerodynamic performance in terms of the elastic modulus of leading edge and vein. Consequently, the elastic modulus plays a key role in enhancing the aerodynamic performance of FW-MAVs.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1998.10a
• /
• pp.39-39
• /
• 1998

본 연구는 500KW급 수평축 풍력발전기용으로 개발된 회전날개의 시제품 제작에 앞서 축소모델에 대한, 이론적으로 예측된 공력성능과 신축에 의한 공력성능을 비교 검토함으로서, 설계결과를 검증하고, 필요한 경우 설계를 보완하여 개발위험도를 최소화하기 위해 수행되었다. 시험모델의 크기는 실제의 5%로서 직경이 2.1m이며 날개의 시위길이는 0.2r/R에서 0.101m, 날개끝에서 0.043m 이고, 날개단면형 상온 FX-S-03-182이다. 블레이드의 재질은 Glass/Epoxy 복합재료로 제작되었으며, 실제 풍황을 모사하기 위해 자연풍 상태에서 실험하였다. 실험장치의 구성은 15m 높이의 타워에 회전날개와 전자브레이크 및 각종 센서를 장착하였고, 날개가 회전하기 시작하면 제동장치에 의해 부하를 주면서 토크, 회전수, 풍속 등을 각각의 센서로부터 자료획득장치를 통해 자료처리를 할 수 있도록 하였다. 실험하는 동안 풍속은 4m/s-13m/s 정도로서 시동 풍속인 4m/s와 정격풍속인 12m/s를 포함하여 회전날개의 전체적인 특성을 파악하기 용이하였고, 이론적인 예측성능과 측정된 성능을 비교 검토한 결과 비슷한 결과를 얻어 공력설계 및 해석 방법을 검증하였다.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1148_1149
• /
• 2009

반사형 전동 블라인드는 BEMS(Building Energy Management System)에 이용되는 조명 에너지 절감 장치로서, 블라인드 날개를 반사형 재질로 제작하여, 외부 채광이 블라인드 날개에 반사되어 천장에 반사되고 반사된 빛은 천장에서 확산되어 실내 깊숙이 부드럽고 균일한 조도를 공급해 준다. 이를 이용하면, 실내 거주자의 불편함 없이 실내 인공조명 사용량을 줄일 수 있다. 이를 구현하기 위해서는 태양광선의 고도의 변화에 따라 블라인드의 제어 각도를 계산하여 블라인드 제어 전동 모터를 구동해야 한다. 따라서 본 논문에서는 외부 채광을 실내 천장 면에 균일하게 반사할 수 있는 블라인드 날개의 제어 각도의 최적 조건을 제시하고, 컴퓨터 시뮬레이션을 통해 제시한 블라인드 날개 각도의 최적성을 검증하였다.

• 열병합발전
• /
• s.71
• /
• pp.3-9
• /
• 2009

최근 국내 발전분야 최고 관심사는 직렬형 축을 가지는 1000MW 이상의 대용량 고효율 증기터빈 개발 및 운영이다. 발전 산업계 요구를 충족시키기 위하여 터빈 설계사들은 새로운 대용량의 저압터빈 실린더 모듈을 개발하고 있는데 개발된 모듈의 특징은 진보된 유체역학과 구조적 분석 기술을 결합하고 기존 합금강 재질 최종단 익에 작용하는 응력한계 길이인 1000mm 이상 길이의 최종단 날개를 개발하는 것이다. 본 논고에서는 Alsthom사에서 새롭게 개발된 최종단 익(翼)의 공역학 및 기계적 특성 설계 개발내용과 실증시험 결과를 소개하고자 한다.

• Composites Research
• /
• v.20 no.1
• /
• pp.8-14
• /
• 2007

Nonlinear aeroelastic analyses of composite wing with flap are performed considering free-play and dynamic stiffness of actuator. Doublet-Hybrid method is used for the calculation of subsonic unsteady aerodynamic forces. Free-play is modeled as a bilinear spring and is linearized by using the describing function method. Dynamic stiffness is obtained from governing equation of gear system and the aeroelastic analyses were performed according to ply-angle of laminate and material. The linear and nonlinear flutter analysis results show that the flutter characteristics are significantly dependent on the free-play and dynamic stiffness. from the nonlinear flutter analysis, various types of limit cycle oscillations are observed in a range of air speeds below or above the linear divergent flutter boundary.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.4
• /
• pp.24-37
• /
• 2023

This study analyzes the materials and external characteristics of the Angbu-ilgu, a kind of scaphe sundial, which was newly designated as a Korean Treasure in 2022. The Angbu-ilgu Treasure is owned by three institutions - the National Palace Museum Of Korea, Gyeongju National Museum, and Sungshin Women's University Museum - and is similar as a twin in its material, size, outward appearance, as well as production techniques that include casting, silver inlays, and metal joints. The Three-Treasure Angbu-ilgu is made of brass in the ratio of 90.6: 6.0: 1.8 with Cu: Zn: Pb. This composition clearly differs from Treasure No. 845, an Angbuilgu which has a composition ratio of 82.2: 3.7: 11.8 with Cu: Zn: Pb. In this new Angbu-ilgu Treasure, the hemisphere's stand has four vertical pillars sculpted in a dragon pattern and bilateral wings carved in a cloud pattern on the pillars, which are joined to the hemisphere's horizontal ring with rivets and silver solders, respectively. The dragon-in-clouds pillar (雲龍柱) shows the most outstanding formative beauty of the various Angbu-ilgu pillars produced in the late Joseon Dynasty. It can be seen that the altitude of the north pole engraved on the Angbu-ilgu was made after 1713. Production is, however, actually estimated to have occurred close to the 19th century, the era of the Jinju Kang family, who were professional Angbuilgu makers. Hopefully, this study will lead to a historical science and technology review with modern scientific instruments analyzing the materials and external characteristics of the three Angbu-ilgus designated as a Korean Treasure in 2022.

• 보존과학연구
• /
• s.35
• /
• pp.57-71
• /
• 2014

As results of this study about the restoration and production techniques of the ridge-end roof tiles excavated from middle gate site in Bunhwangsa Temple, the ridge-end tile was considered that can be combined with four distinguished parts such as a body with upper and lower portions, a back, a belly, and a wing. And also some patterns can be verified. The body and the wing were piled up the coil clay and the back-side was bonded. The pileup process was assumed that three types of wood tools were applied to bond the facing surfaces. After the completion of the pileup process, the entire exterior was retouched by hand. For touching the inside, bare hands or some tools like a wooden branches were used to scratch and to re-face a clay plasterwork. And also, the stamped patterns which produced by framework were bonded to the body. The results from the XRD and the TG-DTA, Tridymite which shows the phase transition in more than $867^{\circ}C$ could not be identified, and also the endothermic reaction peak at $1063^{\circ}C$ showed the result that the alkali feldspar such as the albite was changed into a different mineral at $1050^{\circ}C$. Therefore, the ridge-end tiles can be considered that the firing temperature was below $867^{\circ}C$.

• Journal of the Korean Society of Costume
• /
• v.50 no.7
• /
• pp.75-96
• /
• 2000

Modern clothing is approached in the level of art, and it becomes the means of expressing individuality in modern society uniformed by the development of information society. In this modern society, modern men need the recovery of humanity and expectations of handcrafted skills for the succession of tradition culture. Prior to expressing individuality, we should examine our traditional culture and combine it with western culture. Quit started to be used for practical purpose such as life items, but it is expanded to the fields of art. Used in dress and its ornaments design, quilt is often applied to the addition of aesthetic factors or cubic material feelings by transforming its warming effect. Hereby, this study has a purpose to create high value added modern dross and its ornaments design by expressing the modern clothing is approached in the level of art, and it becomes the means of expressing individuality roe-dimensional characteristics of quilt, and applying the color combination and the surface of butterfly wings to dress and its ornaments design. The following are the results of this study. 1. The concept of quilt started for practical purposes, but it is expanded to decoration in modern times, and it is confirmed that quilt can be variously applied to handcrafted modern design. 2. Quilt removes the plane character of textile and it riches the three-dimensional material of dress and its ornaments. Applying these characteristics, the expression of transparent wings were possible with 3 transparent layers of textile. 3. The spledid color of butterfly wings are expressed by coloring oganza and felt, and the various colors of felt showed rich color gradation. 4. The form and pattern of butterfly wings are applied as modeling form and line, and the transformation. repetition and expansion of unit forms determined the form of quilting lines. By designing the characteristics of back wings for the composition line of clothing, the form characteristics of a motif could be emphasized. 5. By using felt, oganza, Damdam yarn and ostritch feathers in expressing butterfly wings, the warm material of Linbun is felt, and the tip hair of wings are expressed by croche techniques using Damdam yarn.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.7
• /
• pp.552-560
• /
• 2013

Airplane Buhwal is the first light airplane which is designed and made in South Korea. Restoration of airplane Buhwal is designed based on the one made by Korean Airforce in 2004 but there are some changes also. It uses aluminum main wing, electronic indicator, BRS(Ballistic recovery parachute) and black box for improved performance. In this paper, for the restorated Buhwal, major design changes are introduced, structure, aerodynamic and stability analysis are reviewed and improved performances which is proven through flight test are shown. This study will be a big help for domestic light airplane development.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.1
• /
• pp.31-37
• /
• 2017

In this paper, computation results of reducible modeling, stress recovery and energy release rate were compared with the results of VABS, Virtual Crack Closure Technique. The result of stress recovery analysis for 1-D model including the stiffness matrix is compared with stress results of three-dimensional 3-D FEM. Energy release rate of composite beam with longitudinal cracks is calculated and compare verifications of numerical analysis results of 3-D FEM and VABS. The procedure of calculating energy release rate through dimensional reduction and stress recovery is intended to be efficient and be utilized in the life-cycle of high-altitude uav's wing, wind blades and tilt rotor blade.